Sponsored Content
Full Discussion: network setup???
Special Forums IP Networking network setup??? Post 75431 by zazzybob on Saturday 18th of June 2005 07:25:10 AM
Old 06-18-2005
If you're just doing this on the fly
ifconfig ce0 plumb (or qfe0, hme0, whatever your NIC device is)
ifconfig ce0 <ip_address> netmask <netmask> up
echo "gateway_ip" > /etc/defaultrouter
vi /etc/resolv.conf and add your DNS information

To make permanent, you'll need to add entries to /etc/hosts /etc/netmasks and create an /etc/hostname.ce0 (or qfe0, hme0, whatever) file with the hostname in it.

There are other things to do depending on what you're doing.

These tasks will be covered in basic system administration texts.

If you get stuck with a particular step, please don't hesitate to ask! Smilie

Cheers
ZB
 

10 More Discussions You Might Find Interesting

1. IP Networking

Network Setup

I am moving a SUN 250 server from one location to another. The IP address has to change in order to make the server visible in the new building. The system administrator has given me the new IP address for the server, the DNS server IP and the default gateway IP. First question, is this all the... (2 Replies)
Discussion started by: pkappaz
2 Replies

2. Solaris

network setup

on sparc solairs 2.8 which files i need to configure for network setup: /etc/hosts /etc/defaultrouter /etc/netmasks /et/resolv.conf what els?. by the way, how do i configure for rsh?. like for doing "rsh remotehostname date"?. (2 Replies)
Discussion started by: S26+
2 Replies

3. UNIX for Dummies Questions & Answers

solaris 10 wireless network setup

I installed solaris 10 x86 on my dell laptop on a partition alongside windows xp. I am able to connect to the internet in xp with both my ethernet local area connection as well as through my wireless network card. But, however i do not have clue as to how to go about it in solaris. i did not... (0 Replies)
Discussion started by: stakes20
0 Replies

4. Solaris

unable to setup network,urgent help needed!!

Hi all, I just bought a new system, but am unable to configure network on it.. am using a nge0 ethernet interface to login. i've tried all i knew but not of the webpages seem to open. Here is what i've done.. ifconfig nge0 plumb ifconfig -a (nge0) was being displayed as up and running. ... (23 Replies)
Discussion started by: wrapster
23 Replies

5. Solaris

setup network interface

hi, i have sunfire 280r sparc. i would like to know how to setup interface with command ndd line and put it in the file permanently. my card is eri0 and speed can be 100mb or 1000mb full duplex. thanks in advance. (3 Replies)
Discussion started by: lamoul
3 Replies

6. Linux

Proxy / Network Anonymizer setup?

I'm trying to set up a system where I have a front end machine that has a list of proxies it knows to connect through, and all the machines in the office route through this front end machine to go through the appropriate proxy IP. Could someone point me in the direction of some software... (0 Replies)
Discussion started by: kettlewell
0 Replies

7. Solaris

How can I setup a NFS server to share with a whole network?

I have a solaris 10 system that is setup as a NFS server. The NFS clients have DHCP running. How do I setup the server, so that it allows mounts for any machine on the network? (3 Replies)
Discussion started by: krishania
3 Replies

8. Linux

How to setup local IPv6 network

Hello everyone, I have question how i can setup local ipv6 network ? Here is my network: I have main ipv6 gw and server X for example that is connected with my main ipv6 gw and all ping6, traceroute6 is working. My local network is connected to one switch and main ipv4 gateway is that server X... (2 Replies)
Discussion started by: gild
2 Replies

9. IP Networking

RHEL 5.0 IP Network setup

Can someone here please help and walk me through what I need to do to setup my network so that I can start an oracle listener ? I am connected through a router (netgear) and everytime I start my machine the ip address changes because of DHCP (I think). There are so many parameters that I do... (5 Replies)
Discussion started by: jxh461
5 Replies

10. Red Hat

[SOLVED] Wireless Network Setup

Hi, I am trying to set up a wireless internet connection on my centos OS (6). I can connect via the copper using the internal LAN but cannot get the wireless connection working. The 2 files that I have configured are: My wpa_supplicant.conf: ctrl_interface=/var/run/wpa_supplicant... (1 Reply)
Discussion started by: Duffs22
1 Replies
IPROUTE(3)						     Library Functions Manual							IPROUTE(3)

NAME
iproute - Internet route table manager SYNOPSIS
bind -a #P /net /net/iproute /net/ipifc DESCRIPTION
The iproute device allows the specification of routes for families of IP addresses. It maintains a kernel-resident routing table for IP addresses used by TCP, IL and UDP. Each route consists of a destination IP address, an IP mask, and an IP gateway address. Every packet sent by the system is routed according to the route table. An address matches the route table entry when a packet's destination address matches the table destination address under the mask. When a match is found, the packet is sent to the gateway IP address. If there is no match, the packet is sent with the original destination address. If there are several matches, the one whose mask has the fewest leading zeros is chosen. (Because of the definition of IP masks, this mask preserves the largest portion of the address and is therefore the most specific.) This is forced by storing the routes in decreasing number of ones order and returning the first match. The default gateway has no ones in the mask and is thus the last matched. Reading iproute reports the current routes entered in the table. Writing control messages to iproute edits the table. Route entries are made by writing a string of format add ipdest mask ipgateway Entries are deleted by writing a string of format delete ipdest mask The whole table can be cleared by writing the string For example, to install a gateway address to accept all IP packets from a machine: % echo 'add 0.0.0.0 0.0.0.0 131.107.1.5' > /net/iproute % cat /net/iproute 0.0.0.0 & 0.0.0.0 -> 131.107.1.5 Reading ipifc reports the current IP interfaces being used, one line per interface, showing the device, the maximum transfer unit, the local address, the network mask, and the network address. SOURCE
/sys/src/9/port/deviproute.c SEE ALSO
ip(3), ipconfig(8) IPROUTE(3)
All times are GMT -4. The time now is 05:34 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy