Sponsored Content
Full Discussion: nic configuration
Top Forums UNIX for Dummies Questions & Answers nic configuration Post 74143 by pressy on Wednesday 8th of June 2005 05:14:36 AM
Old 06-08-2005
you would have to know what type your nic is.
for example on a qfe card you have to "activate" your interface:
# ifconfig qfe1 plumb
now you can configure it with your new ip address
# ifconfig qfe1 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.133.255 up
and it is online! but only until a reboot. if you want to set it permanently you would have to edit following files:
/etc/hostname.qfe1 --> IP or hostname (must be in /etc/hosts)
/etc/netmasks --> if you are in a different subnet than the first one
done... ;-)

or do you want to activate a failover nic? then ask again and you will get an answere ;-)

gP
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

NIC Driver

Hi:- I am trying to install a device driver for Intel NIC card on TurboLinux, but getting following errors, cc -O -Wall -o eepro100-diag eepro100-diag.c eepro100-diag.c:72: unistd.h: No such file or directory eepro100-diag.c:73: stdio.h: No such file or directory eepro100-diag.c:74:... (1 Reply)
Discussion started by: s_aamir
1 Replies

2. Solaris

Cause of NIC changes ...?

Hi , I came across a SUN server whereby it was installed with additional ethernet card. By right in any configuration, you would probably see the onboard ports Net0,Net1 and so on should correspond to e1000g0,e1000g1... But instead the ext PCI takes precedence in the order and the Net0 becomes... (3 Replies)
Discussion started by: incredible
3 Replies

3. HP-UX

how can I determine which NIC card is virtual NIC Card

how can I determine which NIC card is virtual NIC Card which condition can make a decision Does HP UX have Virtual Network Adapter Concept if ,it has where I can Find if I Install Virutal Network Adapter or which command that i can get it or which software can generate thanks (2 Replies)
Discussion started by: alert0919
2 Replies

4. Solaris

Not able to find the new NIC

I have a Sun Blade 2500 with SUN 5.9 OS installed. I have one NIC built-in which is working fine. I insert another new NIC in the machine with four RJ45 connector options(means four NICs in one Card). The problem is i am not able to see the new NIC Thanks (13 Replies)
Discussion started by: z_haseeb
13 Replies

5. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux... (0 Replies)
Discussion started by: vectrum
0 Replies

6. IP Networking

squid proxy: one NIC for inbound & one NIC for outbound?

I am new in squid proxy. My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)? Thank you in advance! (4 Replies)
Discussion started by: aixlover
4 Replies

7. Red Hat

I want to tune NIC's rps, rfs and xps value. which NIC device should I modify.

Dear All I want tune my NIC's rps, rfs and xps value. In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1). Here is the question? Which device should I modify ? eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0) Any advice is welcome.... (0 Replies)
Discussion started by: nnnnnnine
0 Replies

8. Virtualization and Cloud Computing

Rediscover a new NIC

hi guys I am using Suse 11 in virtual enviroment using vmware. For some reasons I need to add a new virtual nic or just a nic to my suse 11. so is there a way to add this new NIC to my Suse 11 without restarting? thanks a lot ---------- Post updated 01-24-13 at 01:22 AM ----------... (0 Replies)
Discussion started by: karlochacon
0 Replies

9. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies
netmasks(4)							   File Formats 						       netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 11:31 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy