06-03-2005
setup of 2 gateways on AIX
Please, anybody help on resolving the following problem?
I have 2 netwotks ( 10.0.0.0 and 10.0.11.0 ) on 2 different areas
I need both networks to telnet the corresponding ethernet card.
This is a prblem because AIX is configured with a default gateway.
Please advice how to assign 2 different gateways on the machine.
10 More Discussions You Might Find Interesting
1. AIX
Hi, I'a a new member here.
My company just bought p570 with 8 LPAR (previously we have p650 with 4 LPAR).
Did anyone have procedure how to setup NIM server (NIM LPAR) and how to install other new LPAR to use the NIM server (as client).
Appreciate your help and thank you very much.
Rgds,
David (0 Replies)
Discussion started by: dshg
0 Replies
2. AIX
Hi,
I'm very new to AIX, I have to setup a D-Link print server with HP Laserjet 1300 printer on AIX, any body can guide me thru simple steps to acheive this, like how to install print server, driver and then which services i have to restart after adding the print server all this kind of stuff.
... (1 Reply)
Discussion started by: patras
1 Replies
3. AIX
how to setup a remote printer in aix 5.2 i have an aix 5.2 os and need to setup a remote printer off of it need help on how it is done (2 Replies)
Discussion started by: itivanh
2 Replies
4. AIX
Hi All,
I know there is a way to do this in routers. The question is whether it is posisble to do this in AIX.
For our Web Focus ODBC connection to the Disaster Recovery servers, we want to restrict the access to the ODBC ports so that only the IP address of the Web Focus server can get to... (1 Reply)
Discussion started by: strunz
1 Replies
5. AIX
Hi All,
We are using IBM AIX.
I have to send an automated mail from unix. For which i tried
mail -s "test message" <mail id>
It didn't give me any error message. but i didn't get any mail. On checking mail command, i see the below details.
Final-Recipient: RFC822;... (3 Replies)
Discussion started by: mjdarm
3 Replies
6. AIX
Hi
I have setp a print server in the server and have defind the print queue.
In the print queue characterstic . te default coloum per page is set to 80
and in the printer setup the width of printable area is set to 77..
when I trying to print. it only prints 77 char on a line and the rest is... (0 Replies)
Discussion started by: antointoronto
0 Replies
7. AIX
Hi all,
I have one IBM AIX server (serverA) which is connected to the san storage. I have created a volume group and also file system (jfs2) and mounted to directory /profit.
After that I created a NFS share for that directory and started the NFS daemon.
Over at another server, which is... (1 Reply)
Discussion started by: a_sim
1 Replies
8. AIX
:cool:Hello,
can someone guide me how to create a GPFS filesystem, I've read a couple of redbooks however certain things are still not certain, like if you require to download files or licenses...
any help would be appreciated! (2 Replies)
Discussion started by: ollie01
2 Replies
9. AIX
Hi everyone,
My latest challenge sees me assisting with the setup of one of our classroom labs.
We are trying to configure the lab so that the (5) IBM 9115-505 servers (all running AIX7.1) have their serial 0 ports connected to a Digi PortServer II, which is on the classroom LAN, along with the... (4 Replies)
Discussion started by: richardsantink
4 Replies
10. UNIX for Beginners Questions & Answers
I am new to AIX but not new to unix.
I have an interview for an AIX systems admin position and I know they want someone who has knowledge of High Availability, Failover and LPARs
From my research so far, It appear powerha is used to setup high availability and failover on Power systems but is... (2 Replies)
Discussion started by: mathisecure
2 Replies
LEARN ABOUT REDHAT
smc91c92_cs
SMC91C92_CS(4) Kernel Interfaces Manual SMC91C92_CS(4)
NAME
smc91c92_cs - SMC 91cxx device driver
SYNOPSIS
insmod smc91c92_cs.o [pc_debug=n] [if_port=n] [irq_list=i,j,...]
DESCRIPTION
Smc91c92_cs is the low-level Card Services driver for SMC 91c92, 91c94, 91c96, and 91c100 based PC Card ethernet adapters. When this
driver is attached to a card, it allocates the next available ethernet device (eth0..eth#). This device name will be reported in the ker-
nel log file, and passed on to cardmgr(8).
With the default transceiver setting, the driver will attempt to continuously autodetect the transceiver type (10base2 or 10baseT). There
should normally only be a one or two second lag before the correct transceiver is selected. On particularly noisy or busy networks, it is
possible for the detection logic to incorrectly toggle the transceiver type. If this becomes a problem, it may be necessary to explicitly
select the interface type when the module is loaded or with the ifport command.
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
if_port=n
Selects the transceiver type. 0 is autodetect (10baseT or 10base2), 1 is 10baseT (twisted pair), and 2 is 10base2 (BNC, or thin
net). The default is 0 (autodetect).
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
DIAGNOSTICS
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt notification for some reason. The driver will poll the card (with a signifi-
cant performance penalty) if the problem persists. The most likely cause is an interrupt conflict and/or host bridge configuration
problem.
DIAGNOSTICS
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt notification for some reason. The driver will poll the card (with a signifi-
cant performance penalty) if the problem persists. The most likely cause is an interrupt conflict and/or host bridge configuration
problem.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO
cardmgr(8), pcmcia(5), ifport(8).
pcmcia-cs 2000/06/12 21:24:48 SMC91C92_CS(4)