05-14-2005
Have a look at kingston memory, they do memory for sun machines.
And to answer your original question, no you can't use any SDRAM, PC133 • CL=2 • Unbuffered • ECC • 133MHz • 3.3V
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi, I am new to UNIX. I have a Sun Blade 150 worksation. I used a Dell monitor and Dell keyboard as input and output devices. However, workstation always told me that keyboard couldn't be found. I used Dell keyboard with USB and Dell keyboard with series connector. It all didn't work. Please help... (10 Replies)
Discussion started by: duke0001
10 Replies
2. Solaris
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
Discussion started by: silversaleen68
1 Replies
3. Solaris
Hi, I've been a member for a while but have never posted. I have a Sun Blade 100 desktop and I just installed Solaris 10 and it is unbearably slow. I only have 128 Meg of RAM and need to upgrade. I have searched and found many online resources that have RAM, but I was wondering if anyone has... (12 Replies)
Discussion started by: BrewDudeBob
12 Replies
4. Solaris
We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there.
We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Discussion started by: stottsja
5 Replies
5. Solaris
Hi, this is my 1st post here, I don't know is it proper or not for the question I have, but I may try ask anyway, since it is question about sun's hw/sw issue...
I have my blade 1000 installed additional memory kits, it was originally 2G memory installed on Group0(Bank 0/2) Dimm slots, I got... (5 Replies)
Discussion started by: netshu
5 Replies
6. Solaris
I have recently re-installed Solaris 10 on a Sun Blade 150 followed by a patch set (10_Recommended) dated 2011.12.05.
I have just noticed /bin/sun now returns false, rather than true. See below.
$ uname -a
SunOS myblade1 5.10 Generic_147440-07 sun4u sparc SUNW,Sun-Blade-100
$ /bin/sparc &&... (1 Reply)
Discussion started by: apmcd47
1 Replies
7. Solaris
Hello,
Ive just aquired a blade 150 off ebay.Im new to suns and are having a problem getting it to boot off the cdrom.Openboot continuously tries to do a network boot and I cant enter any commands.Im using an average pc keyboard and it definetly works.Thanks for any help.:wall: (3 Replies)
Discussion started by: chucky
3 Replies
8. Solaris
Hello,
I cant get my blade box to boot off the harddrive after installing solaris 10.I can get to a root prompt after issuing "boot cdrom -s".I tried booting off disk0 and disk1,but I get "the file just loaded does not seem to be executable".Thanks for any help.:wall: (4 Replies)
Discussion started by: chucky
4 Replies
9. Solaris
Hi everybody,
I'm having big troubles in installing Solaris 8 on a Sun Blade 150.
Here are some system specs:
Sun Blade 150 (UltraSPARC-IIe 550MHz)
RAM: 256MB
OBP 4.10.6 2003/06/06 12:30
POST 2.0.1 2001/08/23 17:13
When I try to boot from Solaris 8 CD with boot cdrom or... (10 Replies)
Discussion started by: Vortigern
10 Replies
10. Solaris
hello
i have a forte gamma camera Philips device . and its a medical device. this medical device is came with sun blade 150 pc and pegasys is printed on the sun blade pc .the problem is when i switched the power on , the sun blade runs and a white screen appear with the information about the... (6 Replies)
Discussion started by: moh_abaloo
6 Replies
I740(4) Kernel Interfaces Manual I740(4)
NAME
i740 - Intel i740 video driver
SYNOPSIS
Section "Device"
Identifier "devname"
Driver "i740"
...
EndSection
DESCRIPTION
i740 is an Xorg driver for Intel i740 video cards.
SUPPORTED HARDWARE
The i740 driver supports Intel 740 based cards. A list of cards reported to work is provided in the README file with the driver source.
CONFIGURATION DETAILS
Please refer to xorg.conf(5) for general configuration details. This section only covers configuration details specific to this driver.
The driver auto-detects all device information necessary to initialize the card.
However, if you have problems with auto-detection, you can specify:
VideoRam - in kilobytes
DacSpeed - in MHz
MemBase - physical address of the linear framebuffer
IOBase - physical address of the memory mapped IO registers
The following driver options are supported on all chipsets:
Option "NoAccel" "boolean"
Disable or enable 2D acceleration. Default: acceleration is enabled.
Option "SWCursor" "boolean"
Request a software cursor (hardware is default). Default: off
Option "SDRAM" "boolean"
Force the use of SDRAM timings. Default: off
Option "SGRAM" "boolean"
Force the use of SGRAM timings. Default: off
Option "SlowRam" "boolean"
Force the use of slower ram timings. Default: off
Option "Dac6Bit" "boolean"
Force the use of a 6 Bit Dac (8 Bit is the default). Default: off
Option "UsePIO" "boolean"
Force the use of programmed IO (Memory mapped is the default). Default: off
Note: the i740 X server should automatically detect whether your card has SGRAM or SDRAM. Use the "sgram" and "sdram" options if it is
incorrectly detected.
SEE ALSO
Xorg(1), xorg.conf(5), Xserver(1), X(7)
AUTHORS
Authors include: Kevin E Martin and Daryll Strauss of Precision Insight, Inc.
The XFree86 version of this driver was donated to The XFree86 Project by Precision Insight, Inc., Cedar Park, TX, USA
The Xorg version of this driver originally came from XFree86 4.4rc2.
X Version 11 xf86-video-i740 1.3.2 I740(4)