04-29-2005
Let's say the hostname of your ss20 is server1 and the tape device is 0.
To backup all /opt files from server2 use server1:/dev/rmt/0n
# hostname
server2
# ufsdump 0cf server:/dev/rmt/0n /opt
See the man page for ufsdump (and/or tar) - a .rhosts file will be needed (I usually had one created via the scripts I ran just before the dump and then delete them afterwards as it is a security concern) along with the IP and host names in /etc/hosts for each server involved.
10 More Discussions You Might Find Interesting
1. Linux
All,
Has anybody ever got a Linux server to backup to a remote Solaris tape drive using the dump command and rsh? I can remtoely backup two Solaris server this way. Any help would be appreciated.
Thanks,
Mike (0 Replies)
Discussion started by: bubba112557
0 Replies
2. UNIX for Advanced & Expert Users
Hi,
OS: Solaris9, SPARC.
Commands (and their outputs) that I use to backup two files of size 4GB and 10GB (respectively) are shown below:
# cd /backup/daily/
# mt -f /dev/rmt/0m rew
# tar -cvf /dev/rmt/0m *
a Mails.bkf 4680454 tape blocks
a backup.bkf too large to archive
#
The... (3 Replies)
Discussion started by: mahatma
3 Replies
3. Shell Programming and Scripting
hi all,
very urgent need backup script on tape using solaris 8, my tape drive is DAT 72 on sun v240.
i need a simple script to backup files from directory /data/log/back/200703/filename.log. the files will backup continue each day on the tape which have 72 GB. the files size only 50MB and... (0 Replies)
Discussion started by: bucci
0 Replies
4. UNIX for Dummies Questions & Answers
Hi there: I'm new here
Can anyone help me:
I have DS15 Alpha server : Unix 5.1B
Now i need to connect a DLVT VS80 1U Rackmount Tape Drive unit.
What is the exact comman to mount the DLTape IV??
How do i make backuo @ copy file to the tape?
Thanx to all (0 Replies)
Discussion started by: ayzeayem
0 Replies
5. UNIX for Dummies Questions & Answers
Hi,
I performed backup on tape and I want to append more files to my previous backup on the same backup tape. But before I do that I need to know the backup file size of the first backup I performed so that I know the available size on the backup tape. Can someone help me what command I will use... (0 Replies)
Discussion started by: ayhanne
0 Replies
6. SCO
I am trying to make a full backup of my system using the cpio command. The Tape Unit is a SCSI DDS.
The process started fine but after about 30 minutes, it just stopped and showed the following message:
1755 Signal 31 - Core dumped
Any idea of what is causing this and how to fix it?
... (4 Replies)
Discussion started by: zionpc
4 Replies
7. UNIX for Dummies Questions & Answers
Hello everyone,
Just started UNIX today! In our school we use solaris. I just want to know how do I setup Solaris 10 not the GUI one, the one where you have to type the commands like ECHO, ls, pwd, etc... I have windows xp and I also have vmware.
I hope I am not missing anything! :p (4 Replies)
Discussion started by: Hanamachi
4 Replies
8. UNIX for Dummies Questions & Answers
Hi all
I had started to learn how to backup disk to disk to tape method
Firstly I had backup to my NAS
tar czvf /MyNetworkStorge/backup.tar /home
Secondly I using dd command to copy the tar to tape
dd if=/MyNetworkStorge/backup.tar of=/dev/tape0
But the tape drive always hang.... (5 Replies)
Discussion started by: lijiajin
5 Replies
9. Solaris
Hi,
I want to take backup of files older than 20 days from a directory onto a tape drive on remote machine on Solaris.
The files are of format abc-20100301000000.gz on my local machine.
I know the below commands for searching files older than x days and command for backup procedure.
solar1 #... (7 Replies)
Discussion started by: jyothi_wipro
7 Replies
10. Solaris
I am trying to restore opt on my server.
my issue is, all the partitions are saved into the same back up tape.
what is the exact command to just restore /opt for example, supposing c0t0d0s7 is the partition for /opt
---------- Post updated at 01:16 PM ---------- Previous update was at... (7 Replies)
Discussion started by: feg
7 Replies
LEARN ABOUT MOJAVE
device_maps
device_maps(4) File Formats device_maps(4)
NAME
device_maps - device_maps file
SYNOPSIS
/etc/security/device_maps
DESCRIPTION
The device_maps file contains access control information about each physical device. Each device is represented by a one line entry of the
form:
device-name : device-type : device-list :
where
device-name This is an arbitrary ASCII string naming the physical device. This field contains no embedded white space or non-
printable characters.
device-type This is an arbitrary ASCII string naming the generic device type. This field identifies and groups together devices
of like type. This field contains no embedded white space or non-printable characters.
device-list This is a list of the device special files associated with the physical device. This field contains valid device
special file path names separated by white space.
The device_maps file is an ASCII file that resides in the /etc/security directory.
Lines in device_maps can end with a `' to continue an entry on the next line.
Comments may also be included. A `#' makes a comment of all further text until the next NEWLINE not immediately preceded by a `'.
Leading and trailing blanks are allowed in any of the fields.
The device_maps file must be created by the system administrator before device allocation is enabled.
This file is owned by root, with a group of sys, and a mode of 0644.
EXAMPLES
Example 1: A sample device_maps file
# scsi tape
st1:
rmt:
/dev/rst21 /dev/nrst21 /dev/rst5 /dev/nrst5 /dev/rst13
/dev/nrst13 /dev/rst29 /dev/nrst29 /dev/rmt/1l /dev/rmt/1m
/dev/rmt/1 /dev/rmt/1h /dev/rmt/1u /dev/rmt/1ln /dev/rmt/1mn
/dev/rmt/1n /dev/rmt/1hn /dev/rmt/1un /dev/rmt/1b /dev/rmt/1bn:
FILES
/etc/security/device_maps
SEE ALSO
allocate(1), bsmconv(1M), deallocate(1), dminfo(1M), list_devices(1)
NOTES
The functionality described in this man page is available only if the Basic Security Module (BSM) has been enabled. See bsmconv(1M) for
more information.
SunOS 5.10 16 Jan 2001 device_maps(4)