Do I need an array here? Post: 69750

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

create array holding characters from sring then echo array.

Hi, I wish to store $string1 in $string1array a character in each array element. Then i wish to echo the entire array to the screen so that it reads as the normal string again. I have been trying with the code below but does not work. Please help... To put string into array: ...

2. Programming

Creating an array to hold posix thread ids: Only dynamic array works

I am facing a strange error while creating posix threads: Given below are two snippets of code, the first one works whereas the second one gives a garbage value in the output. Snippet 1 This works: -------------- int *threadids; threadids = (int *) malloc (num_threads * sizeof(int)); ...

3. Shell Programming and Scripting

PHP: Search Multi-Dimensional(nested) array and export values of currenly worked on array.

Hi All, I'm writing a nagios check that will see if our ldap servers are in sync... I got the status data into a nested array, I would like to search key of each array and if "OK" is NOT present, echo other key=>values in the current array to a variable so...eg...let take the single array...

4. Shell Programming and Scripting

perl, put one array into many array when field is equal to sth

Hi Everyone, #!/usr/bin/perl use strict; use warnings; my @test=("a;b;qqq;c;d","a;b;ggg;c;d","a;b;qqq;c;d"); would like to split the @test array into two array: @test1=(("a;b;qqq;c;d","a;b;qqq;c;d"); and @test2=("a;b;ggg;c;d"); means search for 3rd filed. Thanks find the...

5. Shell Programming and Scripting

Store all the passed arguments in an array and display the array

Hi I want to write a script which store all the parameters passed to the script into an array. Once it is stored I want scan through the array and and delete those files for last month present inside the directory. The files in directory is appneded with YYYY_MM_DD. I want to know how can I...

6. Shell Programming and Scripting

PERL : Read an array and write to another array with intial string pattern checks

I have an array and two variables as below, I need to check if $datevar is present in $filename. If so, i need to replace $filename with the values in the array. I need the output inside an ARRAY How can this be done. Any help will be appreciated. Thanks in advance.

7. Shell Programming and Scripting

Bash 3.2 - Array / Regex - IF 3rd member in array ends in 5 digits then do somthing...

Trying to do some control flow parsing based on the index postion of an array member. Here is the pseudo code I am trying to write in (preferably in pure bash) where possible. I am thinking regex with do the trick, but need a little help. pesudo code if == ENDSINFIVEINTS ]]; then do...

8. Shell Programming and Scripting

Pass array to a function and display the array

Hi All I have multiple arrays like below. set -A val1 1 2 4 5 set -A val2 a b c d . . . Now i would like to pass the individual arrays one by one to a function and display/ do some action. Note : I am using ksh Can you please advise any solution... Thanks in advance.

9. Shell Programming and Scripting

Bash arrays: rebin/interpolate smaller array to large array

hello, i need a bit of help on how to do this effectively in bash without a lot of extra looping or massive switch/case i have a long array of M elements and a short array of N elements, so M > N always. M is not a multiple of N. for case 1, I want to stretch N to fit M arrayHuge H = (...

10. Shell Programming and Scripting

Help reading the array and sum of the array elements

Hi All, need help with reading the array and sum of the array elements. given an array of integers of size N . You need to print the sum of the elements in the array, keeping in mind that some of those integers may be quite large. Input Format The first line of the input consists of an...

LEARN ABOUT DEBIAN

natmip

NATMIP(4)						   BSD Kernel Interfaces Manual 						 NATMIP(4)

NAME

     natmip -- IP over ATM PVCs

SYNOPSIS

     device atm
     options NATM

DESCRIPTION

     The NATM protocol stack includes support for IP over ATM.	Without any additional signalling stacks or other modules it is possible to build
     a CLIP (classical IP over ATM) network based on PVCs.

     An ATM network card (en0 in this example) is configured for IP by something like:

	   ifconfig en0 128.252.200.1 netmask 0xffffff00 up

     IP routing is done with special interface routes (routes with directly reachable destinations) with a link layer gateway address.	The link
     layer address specifies the ATM interface through which the destination can be reached, the virtual channel that connects to the destination
     and the ATM characteristics of this channel.  The address part of the link layer address (see link_addr(3)) consists of a fixed part (the
     first 5 bytes) and a part that depends on the kind of the PVC (UBR, CBR, VBR, ABR).  Multi-byte values are big-endian encoded: the bytes with
     the lower numbers contain the higher order bits.

	   byte 0	  Is a flag byte.  Currently only flag 0x20 is used.  When set, all IP frames are LLC/SNAP encapsulated before putting
			  them into an AAL5 frame.  Setting this flag is recommended and allows interoperability with other CLIP implementations.
			  Note that BPF works only with LLC/SNAP encapsulation.

	   byte 1	  This is the VPI of the channel.

	   bytes 2...3	  VCI of the channel.  Must not be zero.

	   byte 4	  Traffic type.  One of 0 (UBR), 1 (CBR), 2 (ABR), 3 (VBR).

     The variable part for UBR connections may be either empty or three bytes:

	   bytes 5...7	  Specifies the peak cell rate for UBR.

     The variable part for CBR connections must be three bytes:

	   bytes 5...7	  Specifies the peak cell rate for CBR.

     The variable part for VBR connections must be 9 bytes long and specifies three values:

	   bytes 5...7	  Specifies the peak cell rate for VBR.

	   bytes 8...10   This is the sustainable cell rate.

	   bytes 11...13  The maximum burst size.

     The variable part for ABR connections must be 19 bytes long and specifies the following values:

	   bytes 5...7	  Specifies the peak cell rate for ABR.

	   bytes 8...10   The minimum cell rate.

	   bytes 11...13  The initial cell rate.

	   bytes 14...16  The transient buffer exposure.

	   byte 17	  The NRM value.

	   byte 18	  The TRM value.

	   bytes 19...20  The ADTF value.

	   byte 21	  The rate increase factor (RIF).

	   byte 22	  The rate decrease factor (RDF).

	   byte 23	  The cutoff decrease factor (CDF).

     To add a PVC the route(8) utility can be used:

	   route add -iface <remote IP address> -link <iface>:<lladdr>

     The iface is the ATM interface through which remote IP address can be reached and lladdr is the link layer address as a string of dot-sepa-
     rated, hexadecimal bytes.

     NATM also supports the old, original format.  This consists of 4 byte link layer addresses (and the channels are implicit UBR):

	   byte 0	  Flags:
				0x01  use AAL5.
				0x02  if using AAL5, use an LLC/SNAP header.

			  Thus, parameter 3 means AAL5 and LLC/SNAP encapsulation (this is the required setting for interworking with other CLIP
			  clients).  Note that BPF works only with LLC/SNAP encapsulation.

	   byte 1	  VPI for the channel

	   bytes 2...3	  VCI for the channel

EXAMPLES

     Suppose you have 3 hosts 128.252.200.1, 128.252.200.2 and 128.252.200.3 connected by ATM through PVCs:

	   between 128.252.200.1 and 128.252.200.2: 0xc9 UBR
	   between 128.252.200.1 and 128.252.200.3: 0xca VBR
	   between 128.252.200.2 and 128.252.200.3: 0xcb CBR

     The parameters for the VBR channel are: PCR 50000, SCR 10000, MBS 10.  The peak cell rate for the CBR channel is 100000.

     To enable the links use the following commands:

     on host 128.252.200.1:
	   ifconfig en0 128.252.200.1 netmask 0xffffff00 up
	   route add -iface 128.252.200.2 -link en0:3.0.0.c9.0
	   route add -iface 128.252.200.3 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a

     on host 128.252.200.2:
	   ifconfig en0 128.252.200.2 netmask 0xffffff00 up
	   route add -iface 128.252.200.1 -link en0:3.0.0.c9.0
	   route add -iface 128.252.200.3 -link en0:3.0.0.cb.1.1.86.a0

     on host 128.252.200.3:
	   ifconfig en0 128.252.200.3 netmask 0xffffff00 up
	   route add -iface 128.252.200.1 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a
	   route add -iface 128.252.200.2 -link en0:3.0.0.cb.1.1.86.a0

     This can also be done in rc.conf(5):

     on host 128.252.200.1:
	   network_interfaces="lo0 en0"
	   ifconfig_en0="inet 128.252.200.1 netmask 255.255.255.0"
	   static_routes="host2 host3"
	   route_host2="-iface 128.252.200.2 -link en0:3.0.0.c9.0"
	   route_host3="-iface 128.252.200.3 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a"

     on host 128.252.200.2:
	   network_interfaces="lo0 en0"
	   ifconfig_en0="inet 128.252.200.2 netmask 255.255.255.0"
	   static_routes="host1 host3"
	   route_host1="-iface 128.252.200.1 -link en0:3.0.0.c9.0"
	   route_host3="-iface 128.252.200.3 -link en0:3.0.0.cb.1.1.86.a0"

     on host 128.252.200.3:
	   network_interfaces="lo0 en0"
	   ifconfig_en0="inet 128.252.200.3 netmask 255.255.255.0"
	   static_routes="host1 host2"
	   route_host1="-iface 128.252.200.1 -link en0:3.0.0.ca.3.0.c3.50.0.27.10.0.0.a"
	   route_host2="-iface 128.252.200.2 -link en0:3.0.0.cb.1.1.86.a0"

SEE ALSO

     en(4), fatm(4), hatm(4), natm(4), patm(4)

AUTHORS

     Chuck Cranor of Washington University implemented the NATM protocol layer along with the EN ATM driver in 1996 for NetBSD.

BSD
								  August 11, 2003							       BSD

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

create array holding characters from sring then echo array.

Discussion started by: rorey_breaker

2. Programming

Creating an array to hold posix thread ids: Only dynamic array works

Discussion started by: kmehta

3. Shell Programming and Scripting

PHP: Search Multi-Dimensional(nested) array and export values of currenly worked on array.

Discussion started by: zeekblack

4. Shell Programming and Scripting

perl, put one array into many array when field is equal to sth

Discussion started by: jimmy_y