09-13-2001
well, to see another network you will most def. need a gateway.. a multi homed machine with an ip on each network will work, but so will a router..
Is there a router in this equation?? with 55 machines and different subnets, it may be a good idea..
e0---
9 More Discussions You Might Find Interesting
1. IP Networking
I understand how to change the ip address permanently however, I need to also make a permanent change to the subnet mask. How would I accomplish this. (5 Replies)
Discussion started by: johnparksjr
5 Replies
2. IP Networking
Hi all,
I installed Fedora 9 + squid at one of PC at work.
Our company has windows 2003 servera acting as DHCP server.
During installation, i set linux box up as Static IP (192.168.0.100)
But once installation completed, The pc is assigned a different IP address instead of 192.168.0.100.... (3 Replies)
Discussion started by: c00kie88
3 Replies
3. Solaris
Hi,
I have a task to edit the subnet mask in almost 100+ solaris servers.Few of the servers are configured with IPMP.There will be no change of IP address or default gateway.If its a single IP we can bring NIC down,change the subnet mask in /etc/netmasks,then bring the NIC back to normal.But... (3 Replies)
Discussion started by: rajip23
3 Replies
4. Solaris
Hi all,
could you please tell me how to Change the subnet mask of interface aded:1 from ffffffc0 to ffffff80
regards
Krishna (7 Replies)
Discussion started by: murthy76
7 Replies
5. AIX
I am new to this forum so please bare with me. I did search for this answer prior to posting but no luck.
Running an AIX NIM Master at 5.3TL9SP4, with about 100 clients. The subnet of one of the networks defined in the NIM env has changed. When I go to Manage Networks, Change/Show... (0 Replies)
Discussion started by: juredd1
0 Replies
6. IP Networking
Is there a command that can lookup ip address, subnet mask, gateway, and dns all at the same. I know ifconfig can lookup ip address and subnet mask. I know route -n can lookup gateway. Not sure about a dns command. So I hope there is a way to lookup ip address, subnet mask, gateway, and dns all at... (2 Replies)
Discussion started by: cokedude
2 Replies
7. Solaris
Hello,
can anyone help me with the command to change the subnet mask on solaris 10? The mask is currently 255.255.255.255 I will like to change it to 255.255.2555.0.
Thank you (5 Replies)
Discussion started by: cjashu
5 Replies
8. Red Hat
Hi Experts,
I'm using samba -3.6.1 on Red Hat Enterprise Linux ES release 4 (Nahant Update 8) ,all seems ok. The issue im facing is as follows.
When ever a user creates a file via windows explorer the permissions assgined to the file are as follows
-rw-rwxr--+ 1 tom group2 0 Mar 9... (1 Reply)
Discussion started by: maverick_here
1 Replies
9. Shell Programming and Scripting
I have this subnet file shown below. How can I calculate all ip addresses from that list
103.22.200.0/22
141.101.64.0/18
10.0.0.0/22I need to be able to read the subnet file and print all IPs in those subnet to an out put file (3 Replies)
Discussion started by: e_mikey_2000
3 Replies
mrinfo(8) System Manager's Manual mrinfo(8)
NAME
mrinfo - Displays configuration information from a multicast router
SYNOPSIS
/usr/sbin/mrinfo [-d debug_level] [-r retry_count] [-t timeout_count] multicast_router
OPTIONS
Sets the debug level. When the debug level is greater than 0 (the default), additional debugging messages are printed. Regardless of the
debug level, if an error condition occurs, mrinfo writes an error message and terminates. Nonzero debug levels have the following effects:
Prints packet warnings to stderr. Prints all level 1 messages and notifications of down networks to stderr. Prints all level 2 messages
and notifications of all packet timeouts to stderr. Specifies the number of times to retry a neighbor query. The default is 3 retries.
Specifies the number of seconds to wait for a neighbor to reply to a query. The default timeout is 4 seconds.
DESCRIPTION
The mrinfo command displays the configuration information from the multicast router multicast_router.
The mrinfo command sends the ASK_NEIGHBORS IGMP message to the specified multicast router. If the multicast router responds, the response
includes the version number and a list of addresses for their neighboring multicast routers. If the responding router has a recent multi-
cast version number, mrinfo requests additional information such as metrics, thresholds, and options from the multicast router. Once the
specified multicast router responds, the configuration is displayed to the standard output.
RESTRICTIONS
You must be superuser in order to run mrinfo.
EXAMPLES
The following example shows the output of the mrinfo command where mbone.phony.dom.net is specified as the multicast router: mrinfo
mbone.phony.dom.net 127.148.176.10 (mbone.phony.dom.net) [version 3.3]:
127.148.176.10 -> 0.0.0.0 (?) [1/1/querier]
127.148.176.10 -> 127.0.8.4 (mbone2.phony.dom.net) [1/45/tunnel]
127.148.176.10 -> 105.1.41.9 (momoney.com) [1/32/tunnel/down]
127.148.176.10 -> 143.192.152.119 (mbone.dipu.edu) [1/32/tunnel]
For each neighbor of the queried multicast router, the IP address of the queried router is displayed, followed by the IP address and name
of the neighbor. In square brackets, the metric (cost of connection) and the threshold (multicast ttl) are displayed. If the queried multi-
cast router has a newer version number, the type (tunnel, srcrt) and status (disabled, down) of the connection are displayed.
SEE ALSO
Commands: map-mbone(8), mrouted(8), mtrace(8)
Networking: mbone.info(7)
mrinfo(8)