Security issue with TCP SYN packets on Linux Post: 67000

9 More Discussions You Might Find Interesting

1. Red Hat

How to check the outbound packets in Linux

I have a linux redhat box , our security department in my company informed me that my server's IP sends So many traffic in my network , This box I am using it as FTP server to store the other servers logs . My question briefly is how to check my outbound packets which are going from my PC to the...

2. IP Networking

Could a tcp issue be causing a null pointer exception?

The client's app gets a 'suspend error' which they say is due to a null pointer exception. Application people say nothing's wrong with the app. Network people say the network's fine. I'm supposed to see what's wrong with the system to be causing this error. I checked the NIC card settings, which...

3. UNIX for Dummies Questions & Answers

Linux box drops the incoming packets

Hi all, I am new to Linux kernel. we have a c file that counts the no. of sends and received packets in each interface, and indicate the user about the error/drop ration of incoming and outgoing packets. in our Linux box , the incoming packets are dropped at random interval. we have our...

4. Linux

Linux dhcp client boot process with packets traffic

Hi Everybody, I would like to know the entire network packets exchange, sequence between a linux dhcp client workstation & dhcp server as client comes up starting from OS booting stage as network service starts to the time client gets dhcp IP address. This would be in a typical LAN ...

5. Solaris

TCP SYN timer

Can anybody please tell me how I can figure out on a solaris server how long it would take a TCP SYN request to timeout before it gets a SYN_ACK back? Thanks,

6. IP Networking

how to hack linux driver to delay incoming packets

hello, can anyone suggest how to delay the incoming packets ?? or how the packets are prossed inside the kernal and a way to make the packets wait a while?? it wud be vry helpful regards sameer

7. IP Networking

Packets sent from Linux TCP socket

Hello, Our software is using a TCP socket (AF_INET, SOCK_STREAM) to communicate with an Ethernet device. When we send a message, the message object writes itself in full onto the socket's stream buffer before the software invokes send() from socket.h. I'm still researching, but have 2...

8. IP Networking

TCP Same Ack Sequencing for Two Packets

I was analyzing a TCP snoop. And found following scenario From Server to Client ---> SEQ 2993 ACK 1744 WIN 8192 LEN 13 From Server to Client ---> SEQ 3006 ACK 1744 WIN 8192 LEN 13 From Client to server --> SEQ 1744 ACK 3019 WIN 3304 I just want to know Why Packet 1 and 2...

9. IP Networking

TCP MSS Issue

Gretings! I have developed simple utility using Berkly sockets interface: So, what do I? $ ifconfig lo mtu 1500 $ make //run netcat $ ./target 127.0.0.1 5555 1460 1000000 #mss: 1460, loop sleep: 1s On other virtual terminal: $ netcat -l 127.0.0.1 -p 5555 On third virtual terminal: #...

LEARN ABOUT HPUX

dh_systemd_start

DH_SYSTEMD_START(1)						     Debhelper						       DH_SYSTEMD_START(1)

NAME

       dh_systemd_start - start/stop/restart systemd unit files

SYNOPSIS

       dh_systemd_start [debhelperoptions] [--restart-after-upgrade] [--no-stop-on-upgrade] [unitfile...]

DESCRIPTION

       dh_systemd_start is a debhelper program that is responsible for starting/stopping or restarting systemd unit files in case no corresponding
       sysv init script is available.

       As with dh_installinit, the unit file is stopped before upgrades and started afterwards (unless --restart-after-upgrade is specified, in
       which case it will only be restarted after the upgrade).  This logic is not used when there is a corresponding SysV init script because
       invoke-rc.d performs the stop/start/restart in that case.

OPTIONS

       --restart-after-upgrade
	   Do not stop the unit file until after the package upgrade has been completed.  This is the default behaviour in compat 10.

	   In earlier compat levels the default was to stop the unit file in the prerm, and start it again in the postinst.

	   This can be useful for daemons that should not have a possibly long downtime during upgrade. But you should make sure that the daemon
	   will not get confused by the package being upgraded while it's running before using this option.

       --no-restart-after-upgrade
	   Undo a previous --restart-after-upgrade (or the default of compat 10).  If no other options are given, this will cause the service to
	   be stopped in the prerm script and started again in the postinst script.

       -r, --no-stop-on-upgrade, --no-restart-on-upgrade
	   Do not stop service on upgrade.

       --no-start
	   Do not start the unit file after upgrades and after initial installation (the latter is only relevant for services without a
	   corresponding init script).

NOTES

       Note that this command is not idempotent. dh_prep(1) should be called between invocations of this command (with the same arguments).
       Otherwise, it may cause multiple instances of the same text to be added to maintainer scripts.

       Note that dh_systemd_start should be run after dh_installinit so that it can detect corresponding SysV init scripts. The default sequence
       in dh does the right thing, this note is only relevant when you are calling dh_systemd_start manually.

SEE ALSO

       debhelper(7)

AUTHORS

       pkg-systemd-maintainers@lists.alioth.debian.org

11.1.6ubuntu2							    2018-05-10						       DH_SYSTEMD_START(1)