SCO 5.05 hard drive pulsing constantly Post: 65818

9 More Discussions You Might Find Interesting

1. SCO

adding hard disk from SCO OpSer in SCO 5.06

Hi! Sorry, but I am'not spesialist in SCO OpenServer. I need to add hard disk from SCO Open Server ( "a") in my SCO OpenServer 5.6. I need data from "a". When I added, I see only swap disk, and didn't see root file system. I need to add IDE and SCSI Please, help me. How right to add disk?...

2. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

3. SCO

Maximuim size hard drive in SCO 5.05

Does anyone remrmber what the maximum hard drive size is for SCO 5.0.5? Also, do I need to plug in the Cylinders/Heads/Sectors manually? I know in ver 5.0.7, you can go over 137GB. TiA

4. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

5. SCO

SCO hard drive with data - No SCO computer

Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux...

6. SCO

Add hard drive to SCO 6.0.0

I've been working on installing SCO OpenServer 6.0.0 and need to install a second hard drive onto the system. I have not done this too often (5 years ago for the same client) and I can not write the "divvy table" to the system (I/O Error.) Where can I find detail step by step instructions?

7. Filesystems, Disks and Memory

Hard Drive Temperature?

Hi, I just set up a raid Z array in solaris xpress and I notice that the drives feel pretty damn hot. I use speedfan to monitor the temperatures of the hard drives in XP. Is there a similar program for solrais? I assume there would be since the drives all have temp sensors in them, but I...

8. Windows & DOS: Issues & Discussions

gVim on windows 7 64 constantly overwrites symbolic and even hard links

I use sugarsync to sync my vimrc across computers. I keep the _vimrc file in a syncing folder and in my home folder, I have a symbolic link ~\_vimrc pointing to ~\Synced Docs\_vimrc. On my mac I have a .vimrc symbolic link pointing at the _vimrc file. On the pc side, every time I open the _vimrc...

9. Filesystems, Disks and Memory

mount old hard drive

Hi guys, I have been looking around and searching for the past hour and did not see anything. but please forgive me if I missed something. I had a sparc 10 ultra cpu die on me, I got a replacement server from a very generous guy here, now I am getting around to remounting my old hard drive with...

LEARN ABOUT MINIX

httppower

httppower(8)							     powerman							      httppower(8)

NAME

       httppower - communicate with HTTP based power distribution units

SYNOPSIS

       httppower [--url URL]

DESCRIPTION

       httppower  is  a  helper program for powerman which enables it to communicate with HTTP based power distribution units.	It is run interac-
       tively by the powerman daemon.

OPTIONS

       -u, --url URL
	      Set the base URL.

INTERACTIVE COMMANDS

       The following commands are accepted at the httppower> prompt:

       auth user:pass
	      Authenticate to the base URL with specified user and password, using ``basic'' HTTP authentication which sends the user and password
	      over the network in plain text.

       seturl URL
	      Set the base URL.  Overrides the command line option.

       get [URL-suffix]
	      Send an HTTP GET to the base URL with the optional URL-suffix appended.

       post [URL-suffix] key=val[&key=val]...
	      Send an HTTP POST to the base URL with the optional URL-suffix appended, and key-value pairs as argument.

FILES

       /usr/sbin/httppower
       /etc/powerman/powerman.conf

ORIGIN

       PowerMan was originally developed by Andrew Uselton on LLNL's Linux clusters.  This software is open source and distributed under the terms
       of the GNU GPL.

SEE ALSO

       powerman(1), powermand(8), httppower(8), plmpower(8), vpcd(8), powerman.conf(5), powerman.dev(5), powerman-devices(7).

       http://sourceforge.net/projects/powerman

powerman-2.3.5							    2009-02-09							      httppower(8)