Sponsored Content
Full Discussion: FSCK on veritas managed disk
Special Forums Hardware Filesystems, Disks and Memory FSCK on veritas managed disk Post 61730 by 98_1LE on Monday 7th of February 2005 11:59:17 PM
Old 02-08-2005
Is there a log on the file system?

First make sure the disk group is imported with:
Code:
vxdg list

If not, import with:
Code:
vxdg import disk_group

If that fails, try:
Code:
vxdg -Cf import disk_group # assuming this is not a cluster

Then start the volume(s):
Code:
vxvol -g disk_group startall

If that fails, try:
Code:
vxvol -f -g disk_group startall

fsck the file system:
Code:
fsck -F vxfs /dev/vx/rdsk/disk_group/volume

If that fails, try:
Code:
fsck -F vxfs -o full /dev/vx/rdsk/disk_group/volume

Mount it up:
Code:
mount -F vxfs /dev/vx/rdsk/disk_group/volume /mount/point

Be sure to replace disk_group and volume with your actual info.

Good luck.

If an actual disk failed, and was not fault tolerant, it will be necessary to rebuilt the volume (and maybe the disk group) and restore the data from backup. If it is RAID 0 ir 5 and has a log you should be able to get it back easily.

Last edited by Yogesh Sawant; 04-10-2011 at 11:13 AM.. Reason: added code tags
 

9 More Discussions You Might Find Interesting

1. Solaris

Veritas root disk mirroring

Hi there, My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct. 1. Break the sub-disks, plexes of the root mirror. 2. Remove the sub-disks,plexes of the root mirror. 3. Remove one of... (10 Replies)
Discussion started by: Jartan
10 Replies

2. Solaris

Need to remove a disk from Veritas

I have a bogus disk that keeps showing up as failed from vxdisk list - - disk hpdg failed was:c2t0d11s2 There isnt any c2 devices on the system: # ls /dev/dsk/c2* /dev/dsk/c2*: No such file or directory # ls /dev/rdsk/c2* /dev/rdsk/c2*: No such file or... (3 Replies)
Discussion started by: kiem
3 Replies

3. Solaris

Help: root partition crashed, fsck failed. Disk problem?

recently this sunfire 280R (solaris 10) is having problme, it was able to boot up, then all suddent, it failed, and I can't even mount the first disk which contains root partition when I boot up from cdrom. 2 X 36G hard drive, I scan first hard drive by "read", there is no bad block. The... (2 Replies)
Discussion started by: steeles
2 Replies

4. UNIX and Linux Applications

Veritas silent disk group creation

I am trying to write a kornshell script that will automatically create veritas disk groups. However, the only utility that I can find that will create the diskgroup is vxdiskadd, which prompts with interactive questions. I've tried to pass the answers through to vxdiskadd, but I receive the... (0 Replies)
Discussion started by: jm6601
0 Replies

5. UNIX for Dummies Questions & Answers

Configure disk group with veritas

People i have an a storage i create two virtual disk 1 y 2. In the virtual disk 1 i configure 8 volumes and in the Vd2 configure 5 volumes. Now i want to create a disk group called Prod2 y Dev2 but when i go to vxdiskadm and i choose add disk o encapusalte when i press list to list the disk... (0 Replies)
Discussion started by: enkei17
0 Replies

6. Solaris

Veritas not attaching replaced disk

Hi, I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk: # vxdctl enable # vxdisk list c1t0d0s2 Device: c1t0d0s2 devicetag: c1t0d0 type: auto flags: online error private autoconfig... (1 Reply)
Discussion started by: masloff
1 Replies

7. Solaris

Veritas disk group not the same on each cluster node.

Need help getting all disk devices back on node 2 the same as node 1. Recently Veritas and/or Sun cluster got wrecked on my 2 node Sun cluster after installing the latest patch cluster. I backed out the patches and then node 2 could see only half of the devices and Veritas drives (though format... (0 Replies)
Discussion started by: buggin
0 Replies

8. Solaris

Disk corruption? Cant run fsck....

NOTICE: /: unexpected free inode 45262, run fsck(1M) fsck: cannot open vfstab Looks like /etc/vfstab (and a few other files has gone) Any ideas? Boot from cd, mount disk and recreate vfstab so that I can run fsck? (1 Reply)
Discussion started by: psychocandy
1 Replies

9. UNIX for Beginners Questions & Answers

How to extend a disk in veritas volume manager in veritas cluster?

Hi Experts, I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system. #hastatus -sum -- System State Frozen A node1 running 0 A node2 running 0 -- Group State -- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
pods::SDL::GFX::ImageFilter(3pm)			User Contributed Perl Documentation			  pods::SDL::GFX::ImageFilter(3pm)

NAME
SDL::GFX::ImageFilter - image filtering functions CATEGORY
TODO, GFX METHODS
MMX_detect int gfx_image_MMX_detect() CODE: SDL_imageFilterMMXdetect(); MMX_off void gfx_image_MMX_off() CODE: SDL_imageFilterMMXoff(); MMX_on void gfx_image_MMX_on() CODE: SDL_imageFilterMMXon(); add int gfx_image_add(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length); OUTPUT: RETVAL mean int gfx_image_mean(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length); OUTPUT: RETVAL sub int gfx_image_sub(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length); OUTPUT: RETVAL abs_diff int gfx_image_abs_diff(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length); OUTPUT: RETVAL mult int gfx_image_mult(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length); OUTPUT: RETVAL mult_nor int gfx_image_mult_nor(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length); OUTPUT: RETVAL mult_div_by_2 int gfx_image_mult_div_by_2(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length); OUTPUT: RETVAL mult_div_by_4 int gfx_image_mult_div_by_4(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length); OUTPUT: RETVAL bit_and int gfx_image_bit_and(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length); OUTPUT: RETVAL bit_or int gfx_image_bit_or(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length); OUTPUT: RETVAL div int gfx_image_div(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length); OUTPUT: RETVAL bit_negation int gfx_image_bit_negation(Src1, Dest, length) unsigned char *Src1 unsigned char *Dest int length CODE: RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length); OUTPUT: RETVAL add_byte int gfx_image_add_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C CODE: RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C); OUTPUT: RETVAL add_uint int gfx_image_add_uint(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned int C CODE: RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C); OUTPUT: RETVAL add_byte_to_half int gfx_image_add_byte_to_half(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C CODE: RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C); OUTPUT: RETVAL sub_byte int gfx_image_sub_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C CODE: RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C); OUTPUT: RETVAL sub_uint int gfx_image_sub_uint(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned int C CODE: RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C); OUTPUT: RETVAL shift_right int gfx_image_shift_right(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N CODE: RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N); OUTPUT: RETVAL shift_right_uint int gfx_image_shift_right_uint(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N CODE: RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N); OUTPUT: RETVAL mult_by_byte int gfx_image_mult_by_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C CODE: RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C); OUTPUT: RETVAL shift_right_and_mult_by_byte int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C) unsigned char *Src1 unsigned char *Dest int length unsigned char N unsigned char C CODE: RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C); OUTPUT: RETVAL shift_left_byte int gfx_image_shift_left_byte(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N CODE: RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N); OUTPUT: RETVAL shift_left_uint int gfx_image_shift_left_uint(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N CODE: RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N); OUTPUT: RETVAL shift_left int gfx_image_shift_left(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N CODE: RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N); OUTPUT: RETVAL binarize_using_threshold int gfx_image_binarize_using_threshold(Src1, Dest, length, T) unsigned char *Src1 unsigned char *Dest int length unsigned char T CODE: RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T); OUTPUT: RETVAL clip_to_range int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax) unsigned char *Src1 unsigned char *Dest int length unsigned char Tmin unsigned char Tmax CODE: RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax); OUTPUT: RETVAL normalize_linear int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax) unsigned char *Src1 unsigned char *Dest int length int Cmin int Cmax int Nmin int Nmax CODE: RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax); OUTPUT: RETVAL convolve_kernel_3x3_divide int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL = SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL convolve_kernel_5x5_divide int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL = SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL convolve_kernel_7x7_divide int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL = SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL convolve_kernel_9x9_divide int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL = SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL convolve_kernel_3x3_shift_right int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL = SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL convolve_kernel_5x5_shift_right int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL = SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL convolve_kernel_7x7_shift_right int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL = SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL convolve_kernel_9x9_shift_right int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char *Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL = SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL sobel_x int gfx_image_sobel_x(Src, Dest, rows, columns) unsigned char *Src unsigned char *Dest int rows int columns CODE: RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns); OUTPUT: RETVAL sobel_x_shift_right int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift) unsigned char *Src unsigned char *Dest int rows int columns unsigned char NRightShift CODE: RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns, NRightShift); OUTPUT: RETVAL align_stack void gfx_image_align_stack() CODE: SDL_imageFilterAlignStack(); restore_stack void gfx_image_restore_stack() CODE: SDL_imageFilterRestoreStack(); AUTHORS
See "AUTHORS" in SDL. perl v5.14.2 2012-05-28 pods::SDL::GFX::ImageFilter(3pm)
All times are GMT -4. The time now is 02:54 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy