Does x86 solaris 9 support PCI RealTek Lan Card Post: 60927

10 More Discussions You Might Find Interesting

1. IP Networking

realtek card

hello dear friends I install Solaris (Binary free Program for x86 PC) and my network board have problems with the configuration. My network board is realtek and the chipset is rtl8139, solaris have support for my network board. when I ping my ip address , i din't have aswer. Solaris 8 see my...

2. Solaris

rs232 pci-card

hello mates, do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it? problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also...

3. AIX

Add PCI ethernet card?

Hi everyone, I recently inherited an IBM RS/6000 43P 150, and it appears that the on board ethernet is dead. Can I put in a PCI ethernet card and use that as the default ethernet connection (as opposed to the one on the motherboard)? If so, what type of card can I use and how does one configure...

4. Solaris

Solaris 8/x86: issues with video card on IBM ThinkPad A20p

hi there, i'm quite new to solaris and recently i've bought a ibm thinkpad... now i intend to install a dual-boot system. in fact i've got it managed to install the end-user system with dual-boot working. apart from following issue other devices got recognized... this is what i've found out...

5. UNIX Desktop Questions & Answers

Does Red Hat Fedora support Nvidia card 8800GTX and 260 card?

Does Red Hat Fedora support Nvidia card 8800GTX and 260 card? Does any Linux OS support Nvidia card?

6. Fedora

Network freezes/ Realtek RTL-8185 wireless lan controller

Hello all :confused: I am using a Realtek RTL-8185 wireless lan controller on my Dell dimension 4800 to try to connect to the internet. my distro is fedora 11. I go to enable wireless and my computer freezes, I have done some upgrading and building on the computer for a year now but I have...

7. Linux

PCI Card recognized

I installed PCI Card HP SC44Ge - SAS1068E on my linux CentOS 5.4 is there a way to find out if the PCI is properly installed and recognized by linux. lspci is enough? just to add that PCI card is connected to a tape... also how can I find out driver and firmware version? thanks a...

8. Solaris

Q:x4270_m2 reconfigure PCI card to slot 5?

Hello all, I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant. My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows: #grep e1000...

9. Solaris

Can't ping new PCI LAN card x4270_m2

Hi, I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10). I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip...

10. Solaris

nic card undetectable in solaris X86

Hi All, I am unable to detect NIC card in solaris 10 installed on X86 system after installation, every thing is installed properly, i have check bios settings in which it is detectable. I suspect we have selected NETWORKED option as NO during installation.How to conform whether we have selected...

LEARN ABOUT XFREE86

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)