Ultra 10 benchmark Post: 59853

Sponsored Content

UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) UNIX Benchmarks Ultra 10 benchmark Post 59853 by 98_1LE on Sunday 2nd of January 2005 10:23:52 PM

01-02-2005

Registered User

Ultra 10 benchmark

CPU/Speed: Ultrasparc IIi / 300MHz
Ram: 128MB (Not enough)
Motherboard: Sun Ultra 5/10
Bus: 4 PCI
Cache: 512K Ecache
Controller: Onboard IDE ATA/33
Disk: 40GB IBM ATA/100
Load: Low, 1 user, apache, samba, ipf, dtlogin disabled.
Kernel: Solaris 5.10 b72
Kernel ELF?: yes
pgms: I used the precompiled binary.

Code:

==============================================================

  BYTE UNIX Benchmarks (Version 3.11)
  System -- SunOS u10 5.10 s10_72 sun4u sparc SUNW,Ultra-5_10
  Start Benchmark Run: Sun Jan  2 18:37:36 CST 2005
   1 interactive users.
Dhrystone 2 without register variables   584339.5 lps   (10 secs, 6 samples)
Dhrystone 2 using register variables     592717.1 lps   (10 secs, 6 samples)
Arithmetic Test (type = arithoh)         2381871.4 lps   (10 secs, 6 samples)
Arithmetic Test (type = register)         35419.7 lps   (10 secs, 6 samples)
Arithmetic Test (type = short)            33789.2 lps   (10 secs, 6 samples)
Arithmetic Test (type = int)              35409.9 lps   (10 secs, 6 samples)
Arithmetic Test (type = long)             35401.9 lps   (10 secs, 6 samples)
Arithmetic Test (type = float)            92294.3 lps   (10 secs, 6 samples)
Arithmetic Test (type = double)           72171.1 lps   (10 secs, 6 samples)
System Call Overhead Test                 58718.0 lps   (10 secs, 6 samples)
Pipe Throughput Test                      70655.1 lps   (10 secs, 6 samples)
Pipe-based Context Switching Test         14137.2 lps   (10 secs, 6 samples)
Process Creation Test                       214.4 lps   (10 secs, 6 samples)
Execl Throughput Test                       132.0 lps   (9 secs, 6 samples)
File Read  (10 seconds)                  106472.0 KBps  (10 secs, 6 samples)
File Write (10 seconds)                   26094.0 KBps  (10 secs, 6 samples)
File Copy  (10 seconds)                   12478.0 KBps  (10 secs, 6 samples)
File Read  (30 seconds)                  108268.0 KBps  (30 secs, 6 samples)
File Write (30 seconds)                   25795.0 KBps  (30 secs, 6 samples)
File Copy  (30 seconds)                   12138.0 KBps  (30 secs, 6 samples)
C Compiler Test                             160.7 lpm   (60 secs, 3 samples)
Shell scripts (1 concurrent)                273.3 lpm   (60 secs, 3 samples)
Shell scripts (2 concurrent)                141.0 lpm   (60 secs, 3 samples)
Shell scripts (4 concurrent)                 71.0 lpm   (60 secs, 3 samples)
Shell scripts (8 concurrent)                 35.3 lpm   (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places           4283.3 lpm   (60 secs, 6 samples)
Recursion Test--Tower of Hanoi            11101.7 lps   (10 secs, 6 samples)


                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Arithmetic Test (type = double)               2541.7    72171.1       28.4
Dhrystone 2 without register variables       22366.3   584339.5       26.1
Execl Throughput Test                           16.5      132.0        8.0
File Copy  (30 seconds)                        179.0    12138.0       67.8
Pipe-based Context Switching Test             1318.5    14137.2       10.7
Shell scripts (8 concurrent)                     4.0       35.3        8.8
                                                                 =========
     SUM of  6 items                                                 149.9
     AVERAGE                                                          25.0

98_1LE

View Public Profile for 98_1LE

Find all posts by 98_1LE

8 More Discussions You Might Find Interesting

1. UNIX Benchmarks

AMD-K5 Benchmark

AMD-K5 Processor at 133Mhz 32MB RAM 5 GB Hard Drive 10MB NIC 1MB ARC Graphics Card PS/1 Keyboard CD-ROM Floppy Drive Kickin' Fast BABY! hehe BYTE UNIX Benchmarks (Version 3.11) System -- FreeBSD evil-linux.net 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003...

2. Solaris

I need to clone an ultra 1 onto and ultra 60

I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this? Frank P.S. If you know of a document somewhere please let me know.

3. Linux

Benchmark for Linux

I work in a computer company which sells computer configurations and parts of them. And I want to give a choice to customers. If they want to buy a PC with Linux installed, not Windows. But I find difficult to test the Graphic Cards in Linux OS. I have searched the web and I didn't found any...

4. UNIX Benchmarks

Precompiled Benchmark software

Hi, Is there a precompiled binary for Solaris 8 available? I need to bench mark our Oracle server, as we are upgrading from SFv880 to SFv890. Both are fully loaded. I can't find a sun machine that I can compile the software on. Tks JohnHo

5. UNIX Benchmarks

Mistake in caculating Benchmark Average

There is a basic principal that you cannot average averages. The overall result for the benchmark should be calculated by dviding the sum of the target results by the sum of the baseline results. This is not the same as dividing the sum of the index results by 6. Changing the way this is...

6. UNIX Benchmarks

HP hardware benchmark

CPU: 1 x PA8600, 440MHz RAM: 1GB Hardware model: 9000/800/N4000-44 BYTE UNIX Benchmarks (Version 3.11) System -- HP-UX xxx B.11.11 U 9000/800 615379343 unlimited-user license Start Benchmark Run: Tue Apr 4 05:43:42 IST 2006 1 interactive users. Dhrystone 2 without register...

7. Linux Benchmarks

What are the benchmark programs for Message passing?

Is there any benchmark programs for Message Passing like SPLASH-2 for Shared Memory.

8. UNIX Benchmarks

unix benchmark thread?

Type: UltraSPARC IIIi 1,593 Mhz x2 Ram: 16G Disk: 2*70G fw scsi drives Load: db application kernel: Sunos5.10 pgms: compiled Sun cc -O2 ============================================================== BYTE UNIX Benchmarks (Version 3.11) System -- SunOS sun.spmbox.com 5.10...

LEARN ABOUT SUSE

volcheck

volcheck(1)							   User Commands						       volcheck(1)

NAME

       volcheck - checks for media in a drive and by default checks all floppy media

SYNOPSIS

       volcheck [-v] [-i secs] [-t secs] pathname

DESCRIPTION

       The  volcheck  utility tells Volume Management to look at each dev/pathname in sequence and determine if new media has been inserted in the
       drive.

       The default action is to volcheck all checkable media managed by volume management.

OPTIONS

       The following options are supported:

       -i secs	Set the frequency of device checking to secs seconds.  The default is 2 seconds.  The minimum frequency is 1 second.

       -t secs	Check the named device(s) for the next secs seconds.  The maximum number of seconds allowed is 28800, which is 8 hours.  The  fre-
		quency of checking is specified by -i. There is no default total time.

       -v	Verbose.

OPERANDS

       The following operands are supported:

       pathname        The path name of a media device.

EXAMPLES

       Example 1: A sample of the volcheck command.

       The following example

	       example% volcheck -v /dev/diskette
	       /dev/diskette has media

       asks Volume Management to examine the floppy drive for new media.

       The following example

	       example% volcheck -i 2 -t 600 /dev/diskette1 &

       asks Volume Management if there is a floppy in the floppy drive every 2 seconds for 600 seconds (10 minutes).

FILES

       /dev/volctl     Volume Management control port

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWvolu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       eject(1), volcancel(1), volmissing(1) rmmount(1M), vold(1M), rmmount.conf(4), vold.conf(4), attributes(5), volfs(7FS)

WARNINGS

       Due  to a hardware limitation in many floppy drives, the act of checking for media causes mechanical action in the floppy drive.   Continu-
       ous polling of the floppy drive will cause the drive to wear out. It is recommended that polling the drive only be performed during periods
       of high use.

SunOS 5.10							    21 Feb 1997 						       volcheck(1)