Pci Id Post: 58162

9 More Discussions You Might Find Interesting

1. BSD

WLAN PCI Cards

Hi! I just wanted to know what network cards are supported in FreeBSD. I have looked at the list of supported cards but I can't find any of them in the stores. Is the list not updated, I would really preciate info about where (in EU, Sweden) I can buy them. /Peter

2. Solaris

rs232 pci-card

hello mates, do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it? problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also...

3. UNIX for Dummies Questions & Answers

bad pci slot?

Hi, im having a problem installing my pci wireless card. Im using knoppix, but my problem is with the mobo i think. im using an older laptop, toshiba satellite 2540 and when i plug in the card i get lights on sometimes. this means its getting power right. so then to install the card into the...

4. Solaris

How to look for open pci slots

I'm looking for open PCI slots in our array of sun boxes. I need help on how to distinguish if there's an open slot or not using prtdiag and prtconf. Is there a better tool for this? TIA. Here's my prtdiag -v | grep pci: pci 66 PCI5 SUNW,qlc-pci1077,2312 (scsi-+ ...

5. Linux

PCI Card recognized

I installed PCI Card HP SC44Ge - SAS1068E on my linux CentOS 5.4 is there a way to find out if the PCI is properly installed and recognized by linux. lspci is enough? just to add that PCI card is connected to a tape... also how can I find out driver and firmware version? thanks a...

6. Programming

help writing pci firmware

For a project that I'm working on I want to write a low level PCI driver, but I can't seem to find any free/cheap documentation on PCI firmware specifications. I came across the "pci firmware specification 3.0" manual but this costs USD $1000 :eek:. I am not developing a commercial product...

7. Solaris

available PCI slots on v440

How do I find any available PCI slots on a v440? When I run prtconf, I get the following output? But I am not able to make out whether all the PCI slots are used. ================================= IO Devices ================================= Bus Freq Brd Type MHz Slot ...

8. Hardware

Lspci: PCI Devices?

hey everyone, just a general question. I did an lspci on my home computer, and it got me thinking... When I hear pci..I think of the physical slots on your motherboard. usually beige in color.. But the list returned to me is of atleast 20 items. None of which, (besides the graphics card) is...

9. Hardware

Could USB ever take over PCI

Internally speaking, for your motherboard bus. Would it be possible for a usb standard to be used in place of the PCI or PCIe bus that is now nearly standard on all PC's? If not, why wouldn't this work?

LEARN ABOUT FREEBSD

trm

TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME

     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device trm

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   trm_load="YES"

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     SCSI controllers supported by the trm driver include:

     o	 Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
     o	 Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     o	 Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
     o	 Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     o	 Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     o	 Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

SEE ALSO

     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
     <cognet@FreeBSD.org>.

BSD
								 December 8, 2002							       BSD