Sponsored Content
Full Discussion: Clustering Two Ultra 5 Boxes
Special Forums IP Networking Clustering Two Ultra 5 Boxes Post 572 by keyur on Thursday 14th of December 2000 11:13:52 PM
Old 12-15-2000
Output of commands

Here are the outputs for the Machine:

IFCONFIG -A
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
hme0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 10.10.10.240 netmask ffffff00 broadcast 10.10.10.255
ether 8:0:20:f2:78:22
hme1: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 224.0.1.27 netmask f0000000 broadcast 239.255.255.255
ether 8:0:20:f2:78:22

NETSTAT -R


Routing Table:
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
10.10.10.0 trafficserver U 3 2 hme0
224.0.0.0 trafficserver1 U 2 0 hme1
224.0.0.0 trafficserver U 3 0 hme0
localhost localhost UH 0 16 lo0

I am trying to ping 224.0.1.27 and the trace shows that it is going through the first interface (hme0) instead of hme1.
 

10 More Discussions You Might Find Interesting

1. Programming

text boxes, radio buttons , check boxes in c++ on unix

Hi ! Please tell me how to get radio buttons, text boxes , check boxes , option buttons , pull down menus in C++ on Unix. I think it would be done using curses.h ..but that's all i know. TIA, Devyani. (3 Replies)
Discussion started by: devy8
3 Replies

2. Solaris

I need to clone an ultra 1 onto and ultra 60

I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this? Frank P.S. If you know of a document somewhere please let me know. (11 Replies)
Discussion started by: frankkahle
11 Replies

3. UNIX for Dummies Questions & Answers

Clustering or not

I woulld like to use the JDE newest version, but I am considering whether using 2 X Wintel server with clustering or 1 Unix server without clustering. Is Unix stable enough to except the clustering? (0 Replies)
Discussion started by: superlouis
0 Replies

4. UNIX for Advanced & Expert Users

Mirroring and Clustering with Veritas

Can anybody help me how to mirror the solaris 10 step-by-step with veritas. Have two disks. Then how can I cluster with veritas (1 Reply)
Discussion started by: karole
1 Replies

5. HP-UX

need to recall my hp serviceguard clustering

hi, do u know any link that will get back to me up to speed on hp serviceguard on clustering? thanks and much appreciated, itik (2 Replies)
Discussion started by: itik
2 Replies

6. Solaris

Clustering filesystems

SunOS 5.10 Generic_142900-15 sun4u sparc SUNW,SPARC-Enterprise How can I tell if "clustering" is being used in my shop? I have to file systems that are identical. These filesystems are nfs mounted. But how can I tell if they are being kept in sync as a result of clustering or some other... (2 Replies)
Discussion started by: Harleyrci
2 Replies

7. UNIX for Dummies Questions & Answers

Linux Clustering

hi guys Some time ago I used Linux HA(Heartbeat) to setup like 3 cluster. Now I have to install another 2 cluster and was checking more info to be sure HA was still used but I found some other stuff like OpenAIS - Corosync - Pacemaker to tell you the truth I am kinda confused here I get... (0 Replies)
Discussion started by: karlochacon
0 Replies

8. Linux

Linux os clustering

Hi, I have done the OS clustering in linux redhat 5.6, my one node is down and when i am trying to reboot the other node it is not coming up. any pointer to this would be helpful. the SAN storage luns are not coming as mounted (2 Replies)
Discussion started by: mohitj.engg
2 Replies

9. HP-UX

HP-UX Clustering

Hello guys, I would like to ask for your assistance, since i am new to HP-UX. Please give me some documentation about clustering in HP-UX. More precisely design,architecture, configuring etc. I am working on my master thesis right now and would like to include some guidance about that.... (1 Reply)
Discussion started by: bazillion
1 Replies

10. Ubuntu

Newbie With Linux Clustering, Need Help!!

Hi All, I am new user here and a new one to try clustering with Ubuntu nodes, and need help. If I should be in another place please mention. I have a two nodes with Ubuntu 14.04 installed on them. I need to make a cluster consisting of these two nodes with purpose of experimentation with... (3 Replies)
Discussion started by: IncognitoExpert
3 Replies
VDE_L3(1)						      General Commands Manual							 VDE_L3(1)

NAME
vde_l3 - Virtual Distributed Ethernet 'Layer 3' Switch. SYNOPSIS
vde_l3 -v vde_plug:ipaddress/netmask [-v...] [-r target_network/netmask:gateway] [-G default_gw] [-M mgmt_socket] DESCRIPTION
A vde_l3 connects to one or more vde_switches, performing ip forwarding among its virtual interfaces. A new interface is created at startup for each -v option given at command line. Static routes to target networks can be defined using the -r option. vde_l3 -v /var/run/s1.ctl:192.168.0.1/24 connects to the vde sock at /var/run/s1.ctl with its virtual interface ve0, having the address 192.168.0.1 and netmask 255.255.255.0. vde_l3 -v /var/run/s1.ctl:192.168.0.1/24 -v /var/run/s2.ctl:10.0.0.254/255.255.0.0 connects to the two vde socks, with its virtual interfaces ve0 and ve1, having addressess 192.168.1.0 and 10.0.0.254 respectively. Hosts in each network can specify the vde_l3 as their gateway to reach the other one. OPTIONS
-v vde_plug:ipaddress/netmask Creates a virtual network interfaces on the vde_l3 box, with address ipaddress and netmask netmask. Please note that the netmask can be specified either in the 'classic' A.B.C.D mode, or just by giving the number of leading bits (f.e., /17 for 255.255.128.0). One can define as many interfaces as she wants. -r target_network/netmask:gateway Specify a static route through gateway to reach hosts in target_network with netmask netmask. One can define as many routes as she wants. -G default_gw Specify a default gateway, to be used whenever no static route is defined for a target host. -M mgmt_socket the unix socket where the parameters (interfaces addresses, routes, etc.) can be checked and changed runtime. unixterm(1) can be used as a remote terminal for wirefilter. NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies"). SEE ALSO
vde_switch(1), vdeq(1), unixterm(1), vde_cryptcab(1), wirefilter(1). AUTHORS
VDE_L3 is a tool by Daniele Lacamera <root@danielinux.net> VDE is a project by Renzo Davoli <renzo@cs.unibo.it> Virtual Distributed Ethernet May 7, 2007 VDE_L3(1)
All times are GMT -4. The time now is 06:12 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy