HCF win modem PCI card Post: 55614

9 More Discussions You Might Find Interesting

1. Solaris

rs232 pci-card

hello mates, do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it? problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also...

2. Solaris

Does x86 solaris 9 support PCI RealTek Lan Card

Hi, i have a RealTek Lan Card on my machine. Does Solaris 9 supports this lan card . Thank You, Shafi

3. AIX

Add PCI ethernet card?

Hi everyone, I recently inherited an IBM RS/6000 43P 150, and it appears that the on board ethernet is dead. Can I put in a PCI ethernet card and use that as the default ethernet connection (as opposed to the one on the motherboard)? If so, what type of card can I use and how does one configure...

4. UNIX for Dummies Questions & Answers

disable power management to a PCI card

I have a US Robotics USR5416 wireless networking card and everytime after hours of inactivity the cardseems to shutdown. I read somewhere the it does not support power management. Is there a way to disable power management to that particular PCI card?

5. Linux

PCI Card recognized

I installed PCI Card HP SC44Ge - SAS1068E on my linux CentOS 5.4 is there a way to find out if the PCI is properly installed and recognized by linux. lspci is enough? just to add that PCI card is connected to a tape... also how can I find out driver and firmware version? thanks a...

6. Solaris

Q:x4270_m2 reconfigure PCI card to slot 5?

Hello all, I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant. My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows: #grep e1000...

7. Solaris

Can't ping new PCI LAN card x4270_m2

Hi, I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10). I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip...

8. AIX

AIX -How to find which NIC is on which PCI card

Hi All, How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v Any idea? Thanks.

9. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

LEARN ABOUT DEBIAN

bestfortress

BESTFORTRESS(8) 						    NUT Manual							   BESTFORTRESS(8)

NAME

       bestfortress - Driver for old Best Fortress UPS equipment

NOTE

       This man page only documents the hardware-specific features of the bestfortress driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports old Best Fortress UPS equipment using a serial connection.

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5):

       baudrate=num
	   Set the speed of the serial connection - 1200, 2400, 4800 or 9600.

       max_load=VA
	   Set the full-scale value of the ups.load variable.

AUTHOR

       Holger Dietze <holger.dietze@advis.de>, Stuart D. Gathman <stuart@bmsi.com>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   The newer Best Power drivers:
       bestups(8), bestuferrups(8), bestfcom(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012							   BESTFORTRESS(8)