12-14-2000
Can someone please help me to cluster two SUN Ultra 5 Boxes to run a application ? I am running Solaris 7 with two Ethernet NICs in each box. The Primary nics have a address of 10.10.10.24x and the other two nics have a multicast address of 224.0.1.27 each. I want to run a application at work (cannot be mentioned here) which requires that the machines be able to ping each other on either of the interfaces. I do not know how to configure routing differently for both the interfaces, such that the packets for network 10 go to hme0 and the multicast packets for network 224 go to hme1. Both the computers go out to the internet using 10.10.10.1 as their gateway. They are the only two machines on the network for multicast. Please help me as soon as possible so that I can get this thing over with and let me know if any other details of my configuration are required. I am very sorry for not being able to name the application that I am going to run after they get clustered. Please help as soon as possible
10 More Discussions You Might Find Interesting
1. Programming
Hi !
Please tell me how to get radio buttons, text boxes , check boxes , option buttons , pull down menus in C++ on Unix.
I think it would be done using curses.h ..but that's all i know.
TIA,
Devyani. (3 Replies)
Discussion started by: devy8
3 Replies
2. Solaris
I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this?
Frank
P.S. If you know of a document somewhere please let me know. (11 Replies)
Discussion started by: frankkahle
11 Replies
3. UNIX for Dummies Questions & Answers
I woulld like to use the JDE newest version, but I am considering whether using 2 X Wintel server with clustering or 1 Unix server without clustering. Is Unix stable enough to except the clustering? (0 Replies)
Discussion started by: superlouis
0 Replies
4. UNIX for Advanced & Expert Users
Can anybody help me how to mirror the solaris 10 step-by-step with veritas. Have two disks. Then how can I cluster with veritas (1 Reply)
Discussion started by: karole
1 Replies
5. HP-UX
hi,
do u know any link that will get back to me up to speed on hp serviceguard on clustering?
thanks and much appreciated,
itik (2 Replies)
Discussion started by: itik
2 Replies
6. Solaris
SunOS 5.10 Generic_142900-15 sun4u sparc SUNW,SPARC-Enterprise
How can I tell if "clustering" is being used in my shop?
I have to file systems that are identical. These filesystems are nfs mounted. But how can I tell if they are being kept in sync as a result of clustering or some other... (2 Replies)
Discussion started by: Harleyrci
2 Replies
7. UNIX for Dummies Questions & Answers
hi guys
Some time ago I used Linux HA(Heartbeat) to setup like 3 cluster.
Now I have to install another 2 cluster and was checking more info to be sure HA was still used but I found some other stuff like OpenAIS - Corosync - Pacemaker to tell you the truth I am kinda confused here
I get... (0 Replies)
Discussion started by: karlochacon
0 Replies
8. Linux
Hi,
I have done the OS clustering in linux redhat 5.6, my one node is down and when i am trying to reboot the other node it is not coming up. any pointer to this would be helpful.
the SAN storage luns are not coming as mounted (2 Replies)
Discussion started by: mohitj.engg
2 Replies
9. HP-UX
Hello guys,
I would like to ask for your assistance, since i am new to HP-UX.
Please give me some documentation about clustering in HP-UX. More precisely design,architecture, configuring etc. I am working on my master thesis right now and would like to include some guidance about that.... (1 Reply)
Discussion started by: bazillion
1 Replies
10. Ubuntu
Hi All,
I am new user here and a new one to try clustering with Ubuntu nodes, and need help. If I should be in another place please mention.
I have a two nodes with Ubuntu 14.04 installed on them. I need to make a cluster consisting of these two nodes with purpose of experimentation with... (3 Replies)
Discussion started by: IncognitoExpert
3 Replies
route(8c) route(8c)
Name
route - manually manipulate the routing tables
Syntax
/etc/route [ -f ] [ -n ] command args ]
Description
The program is used to manipulate the network routing tables manually. However, normally it is not needed, as the system routing table
management daemon, should tend to this task.
The program accepts two commands: add, to add a route and delete, to delete a route.
All commands have the following syntax:
/etc/route command [ net | host ] destination gateway [ metric ]
In this syntax, destination is a host or network for which the route is to, gateway is the gateway to which packets should be addressed,
and metric is an optional count indicating the number of hops to the destination. The metric is required for add commands. It must be
zero if the destination is on a directly-attached network, and nonzero if the route utilizes one or more gateways.
When adding a route with metric 0, the gateway given is the address of this host on the common network, indicating the interface to be used
for transmission. Routes to a particular host are distinguished from routes to a network by interpreting the Internet address associated
with destination. The optional keywords net and host force the destination to be interpreted as a network or host, respectively. If the
destination has a local address part of INADDR_ANY, then the route is assumed to be to a network. Otherwise, it is presumed to be a route
to a host. If the route is to a destination connected via a gateway, the metric should be greater than 0. All symbolic names specified
for a destination or gateway are looked up first as a host name using If this lookup fails, is then used to interpret the name as that of a
network.
The command uses a raw socket and the SIOCADDRT and SIOCDELRT ioctls to do its work. As such, only the superuser can modify the routing
tables.
Options
-f Flushes the routing tables of all gateway entries. If is used with one of the commands described above, the tables are flushed prior
to the command's application.
-n Prevents attempts to print host and network names symbolically when reporting actions.
Restrictions
The change operation is not implemented. Therefore, you should first add the new route, and then delete the old one.
Diagnostics
add [host | network] %s: gateway %s flags %x"
The specified route is being added to the tables. The values printed are from the routing table entry supplied in the ioctl call. If the
gateway address used was not the primary address of the gateway (the first one returned by the gateway address is printed numerically as
well as symbolically.
delete [ host | network] %s: gateway %s flags %x
The specified route is being deleted from the tables. The values printed are from the routing table entry supplied in the ioctl call. If
the gateway address used was not the primary address of the gateway (the first one returned by the gateway address is printed numerically
as well as symbolically.
%s %s done
When the flag is specified, each routing table entry that is deleted is indicated with a message of this form.
Network is unreachable
An attempt to add a route failed because the gateway listed was not on a directly-connected network. The next-hop gateway must be given.
not in table
A delete operation was attempted for an entry which was not present in the tables.
routing table overflow
An add operation was attempted, but the system was low on resources and was unable to allocate memory to create the new entry.
See Also
intro(4n), routed(8c)
route(8c)