12-14-2000
Can someone please help me to cluster two SUN Ultra 5 Boxes to run a application ? I am running Solaris 7 with two Ethernet NICs in each box. The Primary nics have a address of 10.10.10.24x and the other two nics have a multicast address of 224.0.1.27 each. I want to run a application at work (cannot be mentioned here) which requires that the machines be able to ping each other on either of the interfaces. I do not know how to configure routing differently for both the interfaces, such that the packets for network 10 go to hme0 and the multicast packets for network 224 go to hme1. Both the computers go out to the internet using 10.10.10.1 as their gateway. They are the only two machines on the network for multicast. Please help me as soon as possible so that I can get this thing over with and let me know if any other details of my configuration are required. I am very sorry for not being able to name the application that I am going to run after they get clustered. Please help as soon as possible
10 More Discussions You Might Find Interesting
1. Programming
Hi !
Please tell me how to get radio buttons, text boxes , check boxes , option buttons , pull down menus in C++ on Unix.
I think it would be done using curses.h ..but that's all i know.
TIA,
Devyani. (3 Replies)
Discussion started by: devy8
3 Replies
2. Solaris
I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this?
Frank
P.S. If you know of a document somewhere please let me know. (11 Replies)
Discussion started by: frankkahle
11 Replies
3. UNIX for Dummies Questions & Answers
I woulld like to use the JDE newest version, but I am considering whether using 2 X Wintel server with clustering or 1 Unix server without clustering. Is Unix stable enough to except the clustering? (0 Replies)
Discussion started by: superlouis
0 Replies
4. UNIX for Advanced & Expert Users
Can anybody help me how to mirror the solaris 10 step-by-step with veritas. Have two disks. Then how can I cluster with veritas (1 Reply)
Discussion started by: karole
1 Replies
5. HP-UX
hi,
do u know any link that will get back to me up to speed on hp serviceguard on clustering?
thanks and much appreciated,
itik (2 Replies)
Discussion started by: itik
2 Replies
6. Solaris
SunOS 5.10 Generic_142900-15 sun4u sparc SUNW,SPARC-Enterprise
How can I tell if "clustering" is being used in my shop?
I have to file systems that are identical. These filesystems are nfs mounted. But how can I tell if they are being kept in sync as a result of clustering or some other... (2 Replies)
Discussion started by: Harleyrci
2 Replies
7. UNIX for Dummies Questions & Answers
hi guys
Some time ago I used Linux HA(Heartbeat) to setup like 3 cluster.
Now I have to install another 2 cluster and was checking more info to be sure HA was still used but I found some other stuff like OpenAIS - Corosync - Pacemaker to tell you the truth I am kinda confused here
I get... (0 Replies)
Discussion started by: karlochacon
0 Replies
8. Linux
Hi,
I have done the OS clustering in linux redhat 5.6, my one node is down and when i am trying to reboot the other node it is not coming up. any pointer to this would be helpful.
the SAN storage luns are not coming as mounted (2 Replies)
Discussion started by: mohitj.engg
2 Replies
9. HP-UX
Hello guys,
I would like to ask for your assistance, since i am new to HP-UX.
Please give me some documentation about clustering in HP-UX. More precisely design,architecture, configuring etc. I am working on my master thesis right now and would like to include some guidance about that.... (1 Reply)
Discussion started by: bazillion
1 Replies
10. Ubuntu
Hi All,
I am new user here and a new one to try clustering with Ubuntu nodes, and need help. If I should be in another place please mention.
I have a two nodes with Ubuntu 14.04 installed on them. I need to make a cluster consisting of these two nodes with purpose of experimentation with... (3 Replies)
Discussion started by: IncognitoExpert
3 Replies
LEARN ABOUT DEBIAN
vde_l3
VDE_L3(1) General Commands Manual VDE_L3(1)
NAME
vde_l3 - Virtual Distributed Ethernet 'Layer 3' Switch.
SYNOPSIS
vde_l3 -v vde_plug:ipaddress/netmask [-v...] [-r target_network/netmask:gateway] [-G default_gw] [-M mgmt_socket]
DESCRIPTION
A vde_l3 connects to one or more vde_switches, performing ip forwarding among its virtual interfaces. A new interface is created at startup
for each -v option given at command line. Static routes to target networks can be defined using the -r option.
vde_l3 -v /var/run/s1.ctl:192.168.0.1/24
connects to the vde sock at /var/run/s1.ctl with its virtual interface ve0, having the address 192.168.0.1 and netmask 255.255.255.0.
vde_l3
-v /var/run/s1.ctl:192.168.0.1/24
-v /var/run/s2.ctl:10.0.0.254/255.255.0.0
connects to the two vde socks, with its virtual interfaces ve0 and ve1, having addressess 192.168.1.0 and 10.0.0.254 respectively. Hosts in
each network can specify the vde_l3 as their gateway to reach the other one.
OPTIONS
-v vde_plug:ipaddress/netmask
Creates a virtual network interfaces on the vde_l3 box, with address ipaddress and netmask netmask. Please note that the netmask can
be specified either in the 'classic' A.B.C.D mode, or just by giving the number of leading bits (f.e., /17 for 255.255.128.0). One
can define as many interfaces as she wants.
-r target_network/netmask:gateway
Specify a static route through gateway to reach hosts in target_network with netmask netmask. One can define as many routes as she
wants.
-G default_gw
Specify a default gateway, to be used whenever no static route is defined for a target host.
-M mgmt_socket
the unix socket where the parameters (interfaces addresses, routes, etc.) can be checked and changed runtime. unixterm(1) can be
used as a remote terminal for wirefilter.
NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik"
i.e. the German "Association for Electrical, Electronic & Information Technologies").
SEE ALSO
vde_switch(1), vdeq(1), unixterm(1), vde_cryptcab(1), wirefilter(1).
AUTHORS
VDE_L3 is a tool by Daniele Lacamera <root@danielinux.net>
VDE is a project by Renzo Davoli <renzo@cs.unibo.it>
Virtual Distributed Ethernet May 7, 2007 VDE_L3(1)