Dlpar Post: 55032

6 More Discussions You Might Find Interesting

1. AIX

DLPAR Error

Hello, This is the foll error wen i try doin DLPAR from my VIO after adding the virtual adpaters on my clients: HSCL294C DLPAR ADD Virtual I/O resources failed: com.ibm.hsc.common.exceptions.PIHscClientException: HSCL294C DLPAR ADD Virtual I/O...

2. AIX

HMC - tracking dlpar

I am trying to generate a report to track dlpar operation performed on a MS and was wondering if anyone has done this before. I can get history from HMC using lssvcevents , but this does not give me details as to what quantity was added or removed . Any thoughts ? Thanks

3. UNIX for Advanced & Expert Users

LPAR,DLPAR and WPAR

Can anyone please let know difference between LPAR/DLPAR/WPAR. and its purpose ???

4. AIX

DLPAR capable with IVM - checks to do

I cannot find the post with the comment that DLPAR capability was not working with IVM. The two commands that need to be run are (as root, padmin does not know this command): VIOS: lsrsrc IBM.MngNode CLIENTS: lsrsrc IBM.MCP Examples: # lsrsrc IBM.MngNode Resource Persistent Attributes for...

5. AIX

AIX: DLPAR VFC - HMC v9

Hey All, I have running dual VIOS on a P9 systems, and just created a new LPAR profile. My objective is to create LPAR Client VFC adapters, and then DLPAR VFC Server adapters on the VIOS. In the HMC v9 Enhanced GUI, I have DLPAR a VFC adapter to both VIOS, however, you can't specify the...

6. AIX

LPAR RMC state for DLPAR

Hello, I have checked the state of rmc on the HMC as below: HMC1:~> lssyscfg -r lpar -m Server-xxx -F lpar_id,state,rmc_state,rmc_ipaddr,os_version,dlpar_mem_capable,dlpar_proc_capable,dlpar_io_capable --filter "lpar_ids=4" 4,Running,inactive,10.176.x.x,VIOS 2.2.6.51,0,0,0 HMC1:~> lssyscfg...

LEARN ABOUT REDHAT

smartctl

SMARTCTL(8)						      System Manager's Manual						       SMARTCTL(8)

NAME

       smartctl - S.M.A.R.T. control utility

SYNOPSIS

       smartctl [-cdeglostv] [device]

DESCRIPTION

       smartctl  controls the Self-Monitoring, Analysis and Reporting Technology System(S.M.A.R.T.) built into ATA-3 and later IDE and SCSI-3 Hard
       Drives. This is used to check the reliability of the hard drive and predict drive failures. TapeAlerts support for  SCSI  tape  drives  and
       changers smartctl is command line utility designed to perform simple S.M.A.R.T. tasks.

OPTIONS

       smartctl  accepts  two agruments, options and device in respective order. The options begin with a '-' and multiple options should be begun
       with a single '-'. The second argument is the device to be controled. ATA device use the form "/dev/hd*" and  SCSI  devices  use  the  form
       "/dev/sd*".  SCSI devices use only options a,i,c,e,d. For SCSI Tape Drives and Changers with TapeAlerts support use the form "/dev/st*" and
       "/dev/sg*". TapeAlerts devices use only a,i,c,e,d.

       i      Check if the device supports S.M.A.R.T

       c      Check if device has any S.M.A.R.T. Warranty  Failures

       g      Prints only the generic S.M.A.R.T. attributes

       v      Prints only the vendor specific S.M.A.R.T. attributes

       t      Prints only the vendor specific S.M.A.R.T. thresholds

       l      Prints only the S.M.A.R.T. error log

       a      Prints all parameters for c,i,g,v,t,l (for SCSI c,i)

       e      Enables S.M.A.R.T. on device

       d      Disables S.M.A.R.T. on device

       t      Enables S.M.A.R.T. automatic offline self test timer which scans the drive every four hours for disk defects.

       T      Disables S.M.A.R.T. automatic offline self test timer

       O      Runs S.M.A.R.T. Immediate off-line Test

       S      Runs S.M.A.R.T. Short Self Test ( usually under ten minutes)

       s      Runs S.M.A.R.T. Short Self Test in Captive Mode.
	       ( WARNING: This test will busy out drive for length of test. Only run this on drives without any mounted partitions.)

       X      Runs S.M.A.R.T. Extended Self Test ( tens of minutes)

       x      Runs S.M.A.R.T. Extended Self Test in Captive Mode.  ( WARNING: This test will busy out drive for length of test. Only run  this	on
	      drives without any mounted partitions.)

       A      Aborts Non-Captive S.M.A.R.T. Tests.

EXAMPLES

       smartctl -a /dev/hda - prints all S.M.A.R.T. infomration for drive /dev/hda (Primary Master)

       smartctl -d /dev/hdd - disable S.M.A.R.T. on drive /dev/hdd (Secondary Slave)

AUTHOR

       Michael Cornwell, cornwell@acm.org
       Concurrent Systems Laboratory
       Jack Baskin School of Engineering
       University of California Santa Cruz
       http://csl.cse.ucsc.edu/

smartctl-2.1							September 13, 2001						       SMARTCTL(8)