Hyperterminal null modem connection to Solaris Post: 54485

10 More Discussions You Might Find Interesting

1. Solaris

null modem serial cable for server testing

HI all, i still have a problem when using null modem to see the output from my server(sun ultra en 3000). i followed the instruction from the internet, but it is not working. 1. i am using db9(5 4, 2 rows,put in laptop serial port) and db25(13 12, 2 rows,put in (A) server serial port). 2....

2. Solaris

null modem for testing

hi all.. sorry for repeating the same question many times, i just set up a null modem, i am using this as reference : DB25 DB9 -- - 2 TD ---- 2 RD 3 RD ---- 3 TD 4 RTS ---- 8 CTS 5 CTS ---- 7 RTS 7 GND ---- 5 GND 6 DSR -+ +--- 4 DTR 8...

3. Solaris

Solaris Hyperterminal

Hi all, I currently have my WinXP machine connected to my Sun server via serial cable then hyperterminal. I would like to connect my Solaris 10 machine to the server via serial cable but there doesn't appear to be a hyperterminal application included with Solaris 10. Anyone know of a...

4. Solaris

hyperterminal serial solaris 8

Hi All, I connected my serial connection to the installation of solaris 8 and sorry to tell you I use XP/hyperterminal, don't get mad on me... I might use ubuntu later. When I'm installing it, it's ask me below: What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 ...

5. Solaris

Null modem cable in Ultra sparc 10

Hi Gurus, Can I use null modem cable in Ultra sparc 10 workstation Thanks

6. AIX

serial modem connection

I configured the serial modem in my P6-550 AIX 5.3 box But i dont have telephone line. when I run the command # cu -l /dev/tty1 the output is as follows does it mean that my modem is responding to the command? can i say my serial port is working and communicating fine? Connected ...

7. Hardware

Serial connection CAT5 instead of RS232 and Null Modem or Straight cable.

Hello, I want to connect a VT520 terminal to p3 linux box. I have two questions regarding the connection. First, is it possible to use RJ45 instead of RS232 cable. (with DB9 pin to RJ45 and DB25 to RJ45 converter). Second point is that; do i need null modem cable or straight cable...

8. Solaris

No prompt from Solaris to WinXP Hyperterminal

hi I am new to unix and have found a SPARCstation 5 in the shed. I'm told by my father that it was working when it was put there about 8 years ago. It seems to boot up and makes all the right noises, both discs appear to make a noise, the keyboard lights flash etc., etc., but i can't seem to get...

9. Hardware

Modem connection between two local PCs

Hello everybody, I didn't know were to post this, so i posted here in hardware section. I'm having some troubles while trying to interconnect two pc's via modem (soft fax modem, RJ-11 jack). One is a Handheld PC (HP Jornada 728) with a single fax modem slot, and the other computer is a PC with...

10. Solaris

Carrier Detection in Solaris 8 for Dial in and Null Modem Connections

I am having troubles with carrier detection for dialing in via a modem or direct connection via a null modem connection under Solaris 8 (i.e. login session remains active after the modem disconnects). I tried two different dumb modems (which do not respond to AT commands) on the machine that I am...

LEARN ABOUT CENTOS

slip

slip(6x)							XScreenSaver manual							  slip(6x)

NAME

       slip - sucks your screen into a jet engine

SYNOPSIS

       slip [-display host:display.screen] [-foreground color] [-background color] [-window] [-root] [-mono] [-install] [-visual visual] [-ncolors
       integer] [-iterations integer] [-points integer] [-delay microseconds] [-delay2 microseconds] [-fps]

DESCRIPTION

       The slip program does lots of blits and chews up an image.

       The image that it manipulates will be grabbed from the portion of the screen underlying the window, or from the system's  video	input,	or
       from  a	random file on disk, as indicated by the grabDesktopImages, grabVideoFrames, and chooseRandomImages options in the ~/.xscreensaver
       file; see xscreensaver-demo(1) for more details.

OPTIONS

       slip accepts the following options:

       -window Draw on a newly-created window.	This is the default.

       -root   Draw on the root window.

       -mono   If on a color display, pretend we're on a monochrome display.

       -install
	       Install a private colormap for the window.

       -visual visual
	       Specify which visual to use.  Legal values are the name of a visual class, or the id number (decimal or hex) of a specific visual.

       -ncolors integer
	       How many colors should be used (if possible).  Default 200.  The colors used cycle through the hue, making N stops around the color
	       wheel.

       -count integer
	       How many whooziwhatsis to generate.  Default 35.

       -cycles integer
	       How long to frobnicate.	Default 50.

       -delay microseconds
	       How long we should wait between drawing each step.  Default 50000, or about 1/20th second.

       -fps    Display the current frame rate and CPU load.

ENVIRONMENT

       DISPLAY to get the default host and display number.

       XENVIRONMENT
	       to get the name of a resource file that overrides the global resources stored in the RESOURCE_MANAGER property.

SEE ALSO

       X(1), xscreensaver(1), xscreensaver-demo(1), xscreensaver-getimage(1)

COPYRIGHT

       Copyright (C) 1992 by Scott Draves.

       Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, pro-
       vided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice  appear  in  sup-
       porting documentation.

AUTHOR

       Scott Graves <spot@cs.cmu.edu>.

       Ability to run standalone or with xscreensaver added by Jamie Zawinski <jwz@jwz.org>, 18-Oct-93.

X Version 11							5.15 (28-Sep-2011)							  slip(6x)