Hyperterminal null modem connection to Solaris Post: 54476

10 More Discussions You Might Find Interesting

1. Solaris

null modem serial cable for server testing

HI all, i still have a problem when using null modem to see the output from my server(sun ultra en 3000). i followed the instruction from the internet, but it is not working. 1. i am using db9(5 4, 2 rows,put in laptop serial port) and db25(13 12, 2 rows,put in (A) server serial port). 2....

2. Solaris

null modem for testing

hi all.. sorry for repeating the same question many times, i just set up a null modem, i am using this as reference : DB25 DB9 -- - 2 TD ---- 2 RD 3 RD ---- 3 TD 4 RTS ---- 8 CTS 5 CTS ---- 7 RTS 7 GND ---- 5 GND 6 DSR -+ +--- 4 DTR 8...

3. Solaris

Solaris Hyperterminal

Hi all, I currently have my WinXP machine connected to my Sun server via serial cable then hyperterminal. I would like to connect my Solaris 10 machine to the server via serial cable but there doesn't appear to be a hyperterminal application included with Solaris 10. Anyone know of a...

4. Solaris

hyperterminal serial solaris 8

Hi All, I connected my serial connection to the installation of solaris 8 and sorry to tell you I use XP/hyperterminal, don't get mad on me... I might use ubuntu later. When I'm installing it, it's ask me below: What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 ...

5. Solaris

Null modem cable in Ultra sparc 10

Hi Gurus, Can I use null modem cable in Ultra sparc 10 workstation Thanks

6. AIX

serial modem connection

I configured the serial modem in my P6-550 AIX 5.3 box But i dont have telephone line. when I run the command # cu -l /dev/tty1 the output is as follows does it mean that my modem is responding to the command? can i say my serial port is working and communicating fine? Connected ...

7. Hardware

Serial connection CAT5 instead of RS232 and Null Modem or Straight cable.

Hello, I want to connect a VT520 terminal to p3 linux box. I have two questions regarding the connection. First, is it possible to use RJ45 instead of RS232 cable. (with DB9 pin to RJ45 and DB25 to RJ45 converter). Second point is that; do i need null modem cable or straight cable...

8. Solaris

No prompt from Solaris to WinXP Hyperterminal

hi I am new to unix and have found a SPARCstation 5 in the shed. I'm told by my father that it was working when it was put there about 8 years ago. It seems to boot up and makes all the right noises, both discs appear to make a noise, the keyboard lights flash etc., etc., but i can't seem to get...

9. Hardware

Modem connection between two local PCs

Hello everybody, I didn't know were to post this, so i posted here in hardware section. I'm having some troubles while trying to interconnect two pc's via modem (soft fax modem, RJ-11 jack). One is a Handheld PC (HP Jornada 728) with a single fax modem slot, and the other computer is a PC with...

10. Solaris

Carrier Detection in Solaris 8 for Dial in and Null Modem Connections

I am having troubles with carrier detection for dialing in via a modem or direct connection via a null modem connection under Solaris 8 (i.e. login session remains active after the modem disconnects). I tried two different dumb modems (which do not respond to AT commands) on the machine that I am...

LEARN ABOUT OSF1

dc

dc(7)							 Miscellaneous Information Manual						     dc(7)

NAME

       dc - serial line/mouse/keyboard

SYNOPSIS

       controller   dc0   at ibus0   slot 0   vector dcintr

DESCRIPTION

       The  dc	serial	line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
       board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
       partial	modem  control.  The  serial communications interfaces on the DECstation 5000 provide full modem control.  The device special file
       /dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all.	All serial  commu-
       nications interfaces operate at baud rates from B50 to B9600, excluding B200.

       The  dc	ports  are  used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
       control)/local terminal Communications port 2 (w/modem control)/local terminal

       On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is,  non-graphics)	configura-
       tions.  On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port.  The serial system con-
       sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.

RESTRICTIONS

       Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity.  The
       scc driver enforces this restriction.

FILES

       console terminal local terminal local terminal local terminal (DECstation 5100 only)

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	     dc(7)