serial port device path Post: 54183

10 More Discussions You Might Find Interesting

1. Linux

Device serial number

Hey! I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk. If i run cat /proc/bus/usb/devices I get this information: T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00...

2. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Hello! I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a...

3. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Solaris

"Device busy" When Reopening Serial Port

Any help much appreciated. I am a Java developer, not a Solaris adept. I'm having an issue reopening serial port with the Java app I am developing. I develop in Windows and deploy the app on Solaris 10 (Sunfire X4170 with Xeon.) On the target machine my app uses the two serial ports...

6. SCO

Modifying serial printers device

I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014: lpstat -s device for check3: /dev/ttyr002 device for check4: /dev/ttyr002 I changed the tty setting for check3 in: /etc/printcap /var/spool/lp/admins/lp/printers/check3 to /dev/ttyr014 Then I get:...

7. Red Hat

Ethernet Port device path?

Hi, I have a server program that reads data coming in on USB ports. Device paths are in the format: /dev/ttyUSB0 Now, I would like to log data from another device coming in over Ethernet. My first step is trying to track down what the correct device path is which I am unsure of. Anyone...

8. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

9. Shell Programming and Scripting

Read line from serial device with BASH

I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example: echo "gpio set 7" > /dev/ttyACM0 ...followed...

10. UNIX for Advanced & Expert Users

Command to see the logical volume path, device mapper path and its corresponding dm device path

Currently I am using this laborious command lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}' Would like to know if there is any shorter method to get this mapping of...

LEARN ABOUT SUNOS

mkdevmaps

mkdevmaps(1M)						  System Administration Commands					     mkdevmaps(1M)

NAME

       mkdevmaps - make device_maps entries

SYNOPSIS

       /usr/sbin/mkdevmaps

DESCRIPTION

       The  mkdevmaps  command	writes	to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
       media devices.

       The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.

       Entries are generated based on the device special files found in /dev. For the different  categories  of  devices,  the	mkdevmaps  command
       checks for the following files under /dev:

       audio	       /dev/audio, /dev/audioctl, /dev/sound/...
       tape	       /dev/rst*, /dev/nrst*, /dev/rmt/...
       floppy	       /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
       removable disk  /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
       frame buffer    /dev/fb

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Obsolete			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       allocate(1), bsmconv(1M), attributes(5)

NOTES

       mkdevmaps might not be supported in a future release of the Solaris operating system.

SunOS 5.10							    8 Oct 2003							     mkdevmaps(1M)

10 More Discussions You Might Find Interesting

1. Linux

Device serial number

Discussion started by: noratx

2. Ubuntu

Ubuntu 9.04 Serial application to telnet to serial device

Discussion started by: mvona

3. Shell Programming and Scripting

Need help with serial port

Discussion started by: charlie.arya

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Discussion started by: bobby320