Telnet session does not expire Post: 54131

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

telnet session timeout

hi, we can set something such that if the user has been idle for a while, it will auto disconnect. where to do so? thanks

2. Shell Programming and Scripting

Telnet Session

{ sleep 2 echo "$user" sleep 2 echo "$password" sleep 2 echo " ls" sleep 10 echo "exit" }| telnet $server I have a machine x and i have executed the above script on machine 'x'. i entered the...

3. IP Networking

intercept the ip address of a telnet session

The situation: a Unix system (UnixWare 7.1.3) to which are connected other systems; various p.c. on the LAN that they connect Unix to the system via TelNet. The problem: I need to intercept the address IP of the p.cs. connected via telnet to the Unix system. Particularly, I have to know the...

4. UNIX for Dummies Questions & Answers

check for successfull telnet session

In either case using ksh or tcl, how can I check that I have a successfule telnet session and am being prompted with a tacacs login prompt ? :confused: DOIT () { sleep 2 echo "<tacacs name >" sleep 1 echo "<password>" echo "en" sleep 1 echo "<enable password>" echo "term length 512"...

5. UNIX for Dummies Questions & Answers

Unix Telnet session

Hi Is there any way whilst in a telnet session you can view your client machine name that you are using to connect to the Unix box ? :eek:

6. UNIX for Dummies Questions & Answers

Telnet Session to AIX

Hello, I have AIX 5.3 at home connected to netgear router. Port Forwarding has been enabled on the router. Problem is that if I want to telnet, I have to try 2 or 3 times before I can get a logon prompt. It times out for first or second time (Connection to session <IP_Address> failed: Connection...

7. UNIX for Dummies Questions & Answers

Disconnecting a telnet session

How can I disconnect an existing telnet session? The host is a serial port server with multiple ports. The users login using the host's name and a port, i.e. telnet host01 1235. Thanks.

8. HP-UX

ssh session getting hung (smilar to hpux telnet session is getting hung after about 15 minutes)

Our network administrators implemented some sort of check to kill idle sessions and now burden is on us to run some sort of keep alive. Client based keep alive doesn't do a very good job. I have same issue with ssh. Does solution 2 provided above apply for ssh sessions also?

9. SCO

Telnet session disconnects abruptly

I have inherited and SCO OpenServer Release 6 server. The clients connect using telnet to get to a proprietary database application for Service tickets. The issue I am currently having is that the connection just stops abruptly and you can see "telnet session terminated" on the terminal emulation...

LEARN ABOUT DEBIAN

wmacpi

WMACPI(1)						      General Commands Manual							 WMACPI(1)

NAME

       wmacpi - Battery status monitor for systems supporting ACPI

SYNOPSIS

       wmacpi [ -c value ] [ -d display ] [ -m battery no ] [ -s sample rate ] [ -f ] [ -v ] [ -n ] [ -x ] [ -a samples ] [ -v ] [ -h ]

DESCRIPTION

       This manual page documents briefly the wmacpi command.

       wmacpi is a program that displays the current battery status in a WindowMaker dock app, on systems that support Intel's Advanced Configura-
       tion and Power Interface specification (ACPI).

       The program monitors a battery, displaying its current percentage charge via a bar and a numeric value. It also displays the current  power
       status  for  the system, the time remaining (calculated based on the remaining battery capacity and the current rate of power usage), and a
       scrolling message with some hopefully useful information.

       Clicking on the window cycles through the batteries that the ACPI system knows about.

OPTIONS

       -c, --critical=percentage
	      Set critical low alarm at <percentage>% (default: 10%).

       -d, --display=display
	      Set the X display to open the window on.

       -m, --battery=battery number
	      Set the battery to monitor initially.

       -s, --sample-rate=sample rate
	      Set the rate at which to sample the ACPI data, in number of times per minute. Minimum is 1, ie once a minute, default is 20, maximum
	      is 600.

       -n, --no-blink
	      Disable blinking power glyph when charging. Note that it still blinks when the battery reports its capacity state as critical.

       -f, --force-capacity-mode
	      Force  the  use of capacity mode for calculating time remaining. By defalt wmacpi will use the reported values of remaining capacity
	      and present rate to calculate the time remaining on battery. This flag will force the use of the remaining capacity and time samples
	      to calculate the present rate of drain, and from there the time remaining. Note that this mode of calculation generally underreports
	      the time remaining. This mode works around certain buggy ACPI BIOSes that fail to report the current rate.

       -x, --cmdline
	      Run wmacpi in command line mode.

       -a, --samples=samples
	      Average the time remaining over num samples. This greatly improves the accuracy of the reported time remaining.

       -V, --verbosity=num
	      Increase the verbosity of the program. Setting this to 1 will print extra error information; 2 will produce informational output;  3
	      will produce copious debugging output.

       -v, --version
	      Print the version information.

       -r, --no-scroll
	      Disable scrolling message.

       -h, --help
	      Display help.

AUTHOR

       wmacpi  was  originally	written  by  Tim  Copperfield  <timecop@japan.co.jp>,  then  completely  rewritten  after  1.34  by  Simon  Fowler
       <simon@himi.org>.

       This manual page was originally written by Simon Richter <sjr@debian.org> for the Debian  GNU/Linux  system,  and  then	updated  by  Simon
       Fowler.
       Last modification by Simon Fowler <simon@himi.org>, 2007-07-13.

								   July 13 2007 							 WMACPI(1)