07-21-2004
There are several different drivers in a system. For example if your system has a disk drive and tape drive, there would be one driver for the disk and another driver for the tape drive. Each driver gets a number called the major number. The major number just tells the kernel which driver to use.
The minor number is passed to the driver. The driver could ignore it. Or the driver can interpret any way it wants. Usually there are sub fields in the minor number. In the case of a tape driver, one sub field would say which particular tape drive to use. Another sub field might say whether or not to automatically rewind the tape when the file is closed.
9 More Discussions You Might Find Interesting
1. Programming
To further my fledgling knowledge of C, I am re-writing some of the Unix command set. My current command is an ls-style command.
All works well, except for device files. How do I get the major/minor numbers for the dev files?
I see from the stat struct there are st_rdev and st_dev members. Do... (1 Reply)
Discussion started by: zazzybob
1 Replies
2. Shell Programming and Scripting
would like to order this input based on major.minor.release AND build number
Label abc_def_0.0.3_build_999 2008/08/01 'Created by me.'
Label abc_def_0.0.9_build_1000 2008/08/01 'Created by me.'
Label abc_def_9.0.9_build_10001 2008/08/01 'Created by me.'
Label abc_def_10.9.100_build_2... (4 Replies)
Discussion started by: gurpal2000
4 Replies
3. Solaris
Hi
Does anyone know what the major and minor numbers are in Solaris? (2 Replies)
Discussion started by: wisdom
2 Replies
4. AIX
Good evening ...
does anyone of you know how to change major/minor numbers of disk devices ?
I had to migrate from raid1 to raid5 and this messed up my ASM cluster - I know which devices should have which IDs to match the content - but I have no idea how to change it.
Any help would be... (2 Replies)
Discussion started by: zxmaus
2 Replies
5. AIX
Difference between Major and Minor in AIX (5 Replies)
Discussion started by: AIXlearner
5 Replies
6. Programming
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/termios.h>
#include <stdio.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <unistd.h>
#include <signal.h>
#include <sys/mkdev.h>
int
main(int argc, char *argv)
{
int i;
struct stat buf;
... (4 Replies)
Discussion started by: konvalo
4 Replies
7. Shell Programming and Scripting
Hi,
I have line like this :
proj_name/module/trunk/module_1_0
where the first "1" refers to major version and second "0" refers to minor version.
any AWK or command like that so that I can filter out the major and minor ?
like major= command | input line
minor= command |... (4 Replies)
Discussion started by: bhaskar_m
4 Replies
8. Solaris
Hi friends, Please let me know if there is any way to find out Major and Minor numbers of virtual file system like below:
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K ... (8 Replies)
Discussion started by: nitj
8 Replies
9. Shell Programming and Scripting
I want to remove all rows with a minor repeating count less than 30% compared to the major repeating count from my table. The values of a col(starting col 2) can assume is A,T,G,C and N. Each row has at least 2 values and at most 4 repeating values(out of ATGC).
N is considered a missing value... (12 Replies)
Discussion started by: newbie83
12 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)