07-07-2004
I've never personally installed SCO Unix, but I've heard that it's very picky about it's hardware.
For a legacy data-migration project I am aware of at work, for example, one of the groups was trying to build a second SCO box with the same software as the current (very very old) box, for testing purposes. In order to run it on an old PII they found in storage a patch had to be applied.
Now, I'm sure you're using a more current version than that, but you may run into the same issues. You may need to contact SCO support, if you're signed up with a contract.
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hi everyone i have a question for all of you. It may be basic or it may be a good one. I recently aquired a copy of "SCO TCP/IP runtime System for SCO Unix" (thats what the disks say) and for the life of me i can not get it to load. i have tried opening the disk in linux and it can not determine... (0 Replies)
Discussion started by: Cerberus
0 Replies
2. UNIX for Dummies Questions & Answers
I tryed to install SCO 5.0.6 OpenServer on P4 2.0 GHz 384 MB ram 40 GB HDD. It booted from the floppy disk, and when it comes to hd_config I got this error:
unexpected trap in kernel mode:
PANIC: K_trap - kernel mode trap 0x0000000E
** Safe to power off **
Please, what should I do? (1 Reply)
Discussion started by: Guest07
1 Replies
3. SCO
Happy new year guys.
I have a inspiron 5100 laptop "Dell"
When i'm trying to install SCO openserver 5.0.7 i get this error right after it goes thru the hardware bootup stage.
The error is (PANIC: wdsetparam: no device info for ctlr 1 drive 0
is ctlr 0 , drive 0 not... (0 Replies)
Discussion started by: josramon
0 Replies
4. SCO
Hi Am kind of new in Unix. I am used to installing SCO Unix 5.0.5 (very old i guess) on a server with SCSI RAID 0. at the boot prompt during installation I type
restart link=ipsraid Srom=wd(0,0,0,0). But the problem now is that i want to install on a server with no RAID SCSI disk. what command do... (3 Replies)
Discussion started by: okonkwouz
3 Replies
5. SCO
I am trying to install SCO Unixware7 on compaq DL380 Server with bootable CD but it was stuck at .....
It was not going to further
I have given the following
unix
Sco UnixWare7
....
It was giving errror "unrecogonized command", Can any one please help to completed the installation.... (4 Replies)
Discussion started by: visu101
4 Replies
6. UNIX for Advanced & Expert Users
Hello,
I have a P4, 2.4GHz, 256MB ASROCK mainboard: I am trying to install sco 5.0.5 on an 80gb hdd IDE .
I have tried the following techniques:
1. using the updated wd btld image- no success
2. defbootstr biosgeom
3. use interactive divvy, make adjustments using dkinit/dparam during... (0 Replies)
Discussion started by: pude
0 Replies
7. SCO
I need to reinstall SCO 5.0.4 onto another server as the customer does mnot want to pay for another license. Does anoine have the installation media for this? I'm willing to trade as I have every other installation CD. Let me download the 5.0.4 media from you and I'll give you any OS you want. I... (2 Replies)
Discussion started by: buffbiker23
2 Replies
8. SCO
Is there a way to install the "hpsas" btld for the hard disk controller during installation of the OS without having to use a Floppy disk, ie Pen drive or CD since newer servers do not include a floppy drive?
If so, please include specific instructions in the answer.
Thank you. (8 Replies)
Discussion started by: juan.navarrete
8 Replies
9. SCO
We recently started having problems with our SCO OpenServer 5.0.2 Server. I know it is VERY outdated but we are unable to move off of it yet due to an application that is still used daily. We have a new software replacement that will be implemented Q3 2016.
I was looking for some installation... (0 Replies)
Discussion started by: AOC
0 Replies
10. SCO
Hello all,
First off- great forum! I have learned a lot just by reading some of the questions and answers. Good to see there are good people out there still willing to help!
Here is my dilemma- I have a fairly new server running an Activant product on it, which runs SCO openserver 5.0.5... (9 Replies)
Discussion started by: crt001
9 Replies
BTSCO(4) BSD Kernel Interfaces Manual BTSCO(4)
NAME
btsco -- Bluetooth SCO Audio
SYNOPSIS
btsco* at bthub?
audio* at audiobus?
DESCRIPTION
The btsco driver provides support for Bluetooth SCO Audio devices through the audio(4) driver.
The btsco driver must be configured at run time with the btdevctl(8) program. The following properties are used by the btsco driver during
autoconfiguration:
local-bdaddr
Local device address.
remote-bdaddr
Remote device address.
service-name
The btsco driver matches the 'HF' and 'HSET' services. For the 'HF' service, the btsco device will, on open(2), listen for incom-
ing connections from the remote device. Otherwise, btsco will attempt to initiate a connection to the remote device.
rfcomm-channel
This integer value is not used directly, but will be stored and passed via the BTSCO_INFO ioctl as below:
SCO connections require a baseband connection between the two devices before they can be created. The btsco driver does not create this, but
can provide information to facilitate an application setting up a control channel prior to use, via the BTSCO_INFO ioctl(2) call on the mixer
device, which returns a btsco_info structure as follows:
#include <dev/bluetooth/btsco.h>
struct btsco_info {
bdaddr_t laddr; /* controller bdaddr */
bdaddr_t raddr; /* headset bdaddr */
uint8_t channel; /* RFCOMM channel */
int vgs; /* mixer index speaker */
int vgm; /* mixer index mic */
};
#define BTSCO_INFO _IOR('b', 16, struct btsco_info)
The btsco driver can be configured to act in Connect or Listen mode. In Connect mode, the btsco driver will initiate a connection to the
remote device on an open(2) call, whereas in Listen mode, open(2) will block until the remote device initiates the connection.
SEE ALSO
bthset(1), ioctl(2), audio(4), bluetooth(4), bthub(4), btdevctl(8)
HISTORY
The btsco driver was written for NetBSD 4.0 by Iain Hibbert under the sponsorship of Itronix, Inc.
BUGS
btsco takes no notice of the HCI Voice Setting in the Bluetooth controller, and this must be 0x0060 (the default) as alternate values are
currently unsupported.
BSD
October 4, 2006 BSD