Sponsored Content
Operating Systems Solaris SUN E250 Console connectivity Post 53077 by RajaRC on Monday 5th of July 2004 05:14:04 AM
Old 07-05-2004
SUN E250 Console connectivity

Hi,

I have cisco console cable. One end of the cable is DB9 connector and the other end is RJ45 connector. I would like to use this cable to connect to my SUN E250 system from my pc so that I can access the SUn console directly.

I would like to know whether it is possible and also on which interface or port I should connect on the SUN Server.

I beleive the DB9 should be connected to serial1 of my pc and the other end in the SUN box. I don't know on which port/interface.

Regards,
Raja
 

8 More Discussions You Might Find Interesting

1. UNIX Benchmarks

Sun E250 / 512MB Ram

============================================================== BYTE UNIX Benchmarks (Version 3.11) System -- SunOS xxxxx 5.8 Generic_108528-13 sun4u sparc SUNW,Ultra-250 Start Benchmark Run: Sun Jan 11 19:47:12 EST 2004 1 interactive users. Dhrystone 2 without register variables ... (0 Replies)
Discussion started by: kduffin
0 Replies

2. Solaris

Hooking up to Console's on sun's

it there any docs out there anyhwre that have the specs for cabing to a sun console. I have an e420 here, i cant seem to get a console connection, i have triewd the silver serial connectors that come with the new dsun servers, but no luck with those. (1 Reply)
Discussion started by: BG_JrAdmin
1 Replies

3. Gentoo

Uses for a Sun e250?

We are retiring a Sun e250 at work, and I wondered if I could put it to any good use. Will I have any problems loading Linux as opposed to Solaris? Should I use any particular flavor of Linux that might be more Sun friendly? Assuming I manage to load Linux on this server, then what? Will it be... (9 Replies)
Discussion started by: kccrusher
9 Replies

4. Solaris

SUN E250 Cluster

Hi, I need some help, since I am new to cluster. I am handling a site where I have look after two SUN E250 server. I have been asked to configure Active-Active Clustering on these servers. I would like to know how to configure both the servers for clustering. Below are the things which... (5 Replies)
Discussion started by: RajaRC
5 Replies

5. Solaris

Sun Solaris 9 E250 -- Suggestions For External Hard Drives

Hello, Running a Sun Solaris 9 E250 and need advice or suggestions on what type of external hard disks are compatible and or available. It's an old machine and is due for replacement soon but in the short term need an external hard drive for backup etc as the partner/backup machine has just... (2 Replies)
Discussion started by: KenLynch
2 Replies

6. Solaris

sun 8 unable to communicate through console

Hi : I have a e450 sun server that I just started up and I connect my laptop to the serial connection using a null modem cable and it just does not connect. I use hyperterminal, I dont connect a keyboard to the sun machine? Any ideas? Thanks a lot Al (3 Replies)
Discussion started by: alanj4
3 Replies

7. Solaris

Problem with connecting with Sun Java Web console

Hi, I have Solaris 10 8/07 on SPARC and I can't log in Web console. When I opened browser (Firefox 3) at localhost:6789 I get Save file dialog which asks me to save some file with .part at the end. What information should I provide to find out where is the trouble?.. Internet explorer says... (3 Replies)
Discussion started by: Sapfeer
3 Replies

8. Solaris

Sun Solaris Enterprise E250 x64 Help

Hi everybody, my name is Giulia and for me is the fist time in this forum, i hope write in the correct section for my problem. I have a sun solaris server e250 enterprise with sun 5 versionof O.S. Now i wont format all and install new version of solaris, but i don't know the actual corrent... (7 Replies)
Discussion started by: giulia79
7 Replies
LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME
liebert - Driver for Liebert contact-closure UPS equipment NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver. EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5). BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable. You may have to build another cable with DTR connected through to the UPS for it to work. There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a fundamental limitation of any contact-closure driver. SEE ALSO
The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/ Network UPS Tools 05/21/2012 LIEBERT(8)
All times are GMT -4. The time now is 05:24 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy