06-23-2004
a further update
for the commands you gave, zazzy, here are the results
% grep "cdrom" /etc/fstab
/dev/cdrom /media/cdrom auto ro, noauto, user, exec 0 0
% ls -l /dev/cdrom
lrwxrwxrwx 1root root 3 June 12:51 /dev/cdrom -> hdd
I'm going to try the mount command as soon as I get a chance to reboot.
Ta muchily!!!
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hey..alright heres the deal I'm going to do a triple boot if you would Win98SE, Win2K, and Redhat Linux 7.1 now I have two HDs each with 30 gigs i've allowed one HD to the OS's with 10 gigs each...the third I intend to be one for windows to pull things thats compliant with both 98 and 2k and store... (2 Replies)
Discussion started by: PravusMentis
2 Replies
2. UNIX for Dummies Questions & Answers
I am having problems booting to my external CD-ROM drive. When I try to run the command "boot cdrom" from my OK prompt I get the error "SCSI device 6,0 is not responding, Can't open boot device". Also, when I run the command "test cdrom", I get the error "SCSI device 6,0 is not responding, cdrom... (5 Replies)
Discussion started by: saucierm
5 Replies
3. Solaris
Hi there
In our Data centre we have a mixture of SPARCS running from v100 and ultra10's to v800 and v1250 boxes we also have a large amount of x86 X2100 and X4100 boxes
I am looking to purchase an external DVD-ROM drive that we can plug into the back of any of the boxes if we need to (I... (2 Replies)
Discussion started by: hcclnoodles
2 Replies
4. Gentoo
Hello All,
I am pretty new to Linux,
When trying to install TurboLinux 6.0 through a boot floppy,
After a while it says to insert the CD and later it is not recognizing the CDROM,
SO do we need to mount the CD-ROM before installation ??
Thanks in Advance :)
S (13 Replies)
Discussion started by: sbasetty
13 Replies
5. Ubuntu
Hi, I just downloaded and installed Ubuntu yesterday. It's the first time I have used it, so bear with me. I think I figured out how to get my sound drivers to work (X-Fi)... I had downloaded some OSS drivers, bout to go test them.
But what I really want to know is... I have 2 hard drive,... (2 Replies)
Discussion started by: blind melon
2 Replies
6. Solaris
Hello,
I need to replace a cd rom drive with a dvd rom drive in a SunFire v120 running Solaris 8. My objective is to install Solaris 10 from dvd disc. Downloading Solaris 10 cd discs is not an option since I am in Baghdad, Iraq and connection speeds are horrible. So far, all I can get is power to... (9 Replies)
Discussion started by: 555
9 Replies
7. HP-UX
Please help me >
How to diag the external DVD-ROM drive issue whether it is working or not? on HP 9000 server rp7400
I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device only showing all disks >... (0 Replies)
Discussion started by: tpuser
0 Replies
8. UNIX for Advanced & Expert Users
old clunker - rp74000
How to diag the external DVD-ROM drives issue whether it is working or not? on HP 9000 server rp7400
Please help me > I needed to install HP 11i v1 using external DVD-ROM drive on HP 9000 server rp7400. While boot in CO> “search” command is not showing DVD-ROM device... (1 Reply)
Discussion started by: tpuser
1 Replies
9. AIX
I was having problems with the DVD-ROM drive not being recognized. I thought it was a configuration issue, but it appears to be a hardware problem. Now the system hangs at boot. This last time I tried it, it said:
At which point, it hangs. (1 Reply)
Discussion started by: smithfarm
1 Replies
10. SCO
Whenever I click the icon on the SCO desktop, I get an error stating the following:
Cannot stat '/dev/cd0' no such device or address (error 6)
After looking around for a bit, it seemed like I just needed to run mkdev cdrom to setup the CD-ROM drive. I checked the BIOS settings to get the... (2 Replies)
Discussion started by: jdsnatl
2 Replies
SD(4) Linux Programmer's Manual SD(4)
NAME
sd - driver for SCSI disk drives
SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */
#include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */
CONFIGURATION
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti-
tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive.
SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num-
ber is the number of the physical drive in order of detection, and partition_number is as follows:
partition 0 is the whole drive
partitions 1-4 are the DOS "primary" partitions
partitions 5-8 are the DOS "extended" (or "logical") partitions
For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have
major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system.
At this time, only block devices are provided. Raw devices have not yet been implemented.
DESCRIPTION
The following ioctls are provided:
HDIO_GETGEO
Returns the BIOS disk parameters in the following structure:
struct hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
unsigned long start;
};
A pointer to this structure is passed as the ioctl(2) parameter.
The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical
geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of
fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters.
BLKGETSIZE
Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long.
BLKRRPART
Forces a reread of the SCSI disk partition tables. No parameter is needed.
The SCSI ioctl(2) operations are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl(2) will fail
with the error EINVAL.
FILES
/dev/sd[a-h]: the whole device
/dev/sd[a-h][0-8]: individual block partitions
COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2012-05-03 SD(4)