Athlon XP3200 (@2236Mhz) Post: 51476

Sponsored Content

UNIX Standards and Benchmarks UNIX & LINUX Benchmarks (Version 3.11) Linux Benchmarks Athlon XP3200 (@2236Mhz) Post 51476 by Garp on Friday 21st of May 2004 03:33:22 AM

05-21-2004

Registered User

Athlon XP3200 (@2236Mhz)

CPU/Speed: Athlon XP3200 @ 2236mhz
Ram: 1GB DDR (344mhz)
Motherboard: Abit NF7-S
Cache: 512k on board
Controller: Integrated Nforce2
Disk: 120Gb WD Special Edition, 40gb WD Caviar
Load: 1 user. Clean boot, init 5 but X-Windows not loaded.
Kernel: 2.6.5
pgms: gcc 3.2.3
Distribution: Slackware 9.1

Code:

==============================================================

  BYTE UNIX Benchmarks (Version 3.11)
  System -- Linux Garp 2.6.5 #1 Thu May 20 07:42:48 BST 2004 i686 unknown unknown GNU/Linux
  Start Benchmark Run: Fri May 21 00:19:23 BST 2004
   1 interactive users.
Dhrystone 2 without register variables   4517043.9 lps   (10 secs, 6 samples)
Dhrystone 2 using register variables     4492984.7 lps   (10 secs, 6 samples)
Arithmetic Test (type = arithoh)         10177254.1 lps   (10 secs, 6 samples)
Arithmetic Test (type = register)        434876.3 lps   (10 secs, 6 samples)
Arithmetic Test (type = short)           410607.8 lps   (10 secs, 6 samples)
Arithmetic Test (type = int)             434875.8 lps   (10 secs, 6 samples)
Arithmetic Test (type = long)            434881.1 lps   (10 secs, 6 samples)
Arithmetic Test (type = float)           931906.5 lps   (10 secs, 6 samples)
Arithmetic Test (type = double)          931919.2 lps   (10 secs, 6 samples)
System Call Overhead Test                1355764.8 lps   (10 secs, 6 samples)
Pipe Throughput Test                     1269700.8 lps   (10 secs, 6 samples)
Pipe-based Context Switching Test        474448.7 lps   (10 secs, 6 samples)
Process Creation Test                     17770.7 lps   (10 secs, 6 samples)
Execl Throughput Test                      4144.7 lps   (9 secs, 6 samples)
File Read  (10 seconds)                  4098609.0 KBps  (10 secs, 6 samples)
File Write (10 seconds)                  436190.0 KBps  (10 secs, 6 samples)
File Copy  (10 seconds)                   75349.0 KBps  (10 secs, 6 samples)
File Read  (30 seconds)                  4127002.0 KBps  (30 secs, 6 samples)
File Write (30 seconds)                  412763.0 KBps  (30 secs, 6 samples)
File Copy  (30 seconds)                   45584.0 KBps  (30 secs, 6 samples)
C Compiler Test                            1289.6 lpm   (60 secs, 3 samples)
Shell scripts (1 concurrent)               5687.5 lpm   (60 secs, 3 samples)
Shell scripts (2 concurrent)               2996.6 lpm   (60 secs, 3 samples)
Shell scripts (4 concurrent)               1529.0 lpm   (60 secs, 3 samples)
Shell scripts (8 concurrent)                768.3 lpm   (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         155341.0 lpm   (60 secs, 6 samples)
Recursion Test--Tower of Hanoi            71478.0 lps   (10 secs, 6 samples)


                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Arithmetic Test (type = double)               2541.7   931919.2      366.7
Dhrystone 2 without register variables       22366.3  4517043.9      202.0
Execl Throughput Test                           16.5     4144.7      251.2
File Copy  (30 seconds)                        179.0    45584.0      254.7
Pipe-based Context Switching Test             1318.5   474448.7      359.8
Shell scripts (8 concurrent)                     4.0      768.3      192.1
                                                                 =========
     SUM of  6 items                                                1626.4
     AVERAGE                                                         271.1

Garp

View Public Profile for Garp

Find all posts by Garp

3 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Athlon XP + Linux/Unix? and RAM Question

Has anyone had any experience with this new processor and its compatability with Linux/Unix? How did it preform comared to regular Athlons and P4's? I also have one other question. I plan on buying a new dell and fiddling left and right with it. Which type of RAM is better, RDRAM or...

2. UNIX for Dummies Questions & Answers

installing unix on a amd athlon processor

I just need a simple answer on if installing unix on a pc using an AMD processor instead of Intel is going to be a problem. Thank you one and all.

3. Linux Benchmarks

Athlon XP 1600+

System Notes: CPU/Speed: AMD Athlon 1600+ 1.4Ghz Ram: 768 MO DDR 333 PC2100 Motherboard: KG-7 Bus: PCI Cache: 512KB HD Controller: ? Benchmarks: ============================================================== BYTE UNIX...

LEARN ABOUT SUNOS

raidctl

raidctl(1M)						  System Administration Commands					       raidctl(1M)

NAME

       raidctl - RAID hardware utility

SYNOPSIS

       raidctl -c disk1 disk2

       raidctl -d disk1

       raidctl [-f] -F filename controller...

       raidctl -l [controller...]

DESCRIPTION

       The  raidctl  utility  creates, deletes, or displays RAID volumes of the LSI1030 HW Raid controllers that include RAID support. The utility
       also updates firmware/fcode/BIOS for both RAID and non-RAID controllers.

       The raidctl utility requires privileges that are controlled by the underlying file-system permissions. Only privileged users can manipulate
       the RAID system configuration. If a non-privileged user attempts to create or delete a RAID volume, the command fails with EPERM.

       Without options, raidctl displays the current RAID configuration on all exisiting controllers.

OPTIONS

       The following options are supported:

       -c disk1 disk2 (for on board)

	   Create  a  mirror using disk1 and disk2. Replace the contents of disk2 with the contents of disk1. Specify disk1 and disk2 in canonical
	   form, for example, c0t0d0.

	   When you create a a RAID volume, the RAID volume assumes the identity of the first target in the disk pair (disk1). The  second  target
	   (disk2) disappears from the system. Therefore, the RAID volume appears as one disk.

	   To  have  a successful RAID creation, there must not already be a RAID configuration present on the specified controller. Additionally,
	   the secondary disk must not be mounted, as it has all its data erased and replaced with the primary disk's data.

       -d disk1 (for on board)

	   Delete the RAID volume specified as disk1.

	   Specify disk1 in canonical form, for example, c0t0d0.

       -f (for HBA)

	   Force an update. Do not prompt.

       -F filename controller (for HBA)

	   Update the firmware running on the specified controller (controller).

       -l [controller ...] (for on board)

	   List the system's RAID configuration. If controller is specified, list RAID configurations for controller.

	   Output from the -l lists the following information:

	   RAID Volume	   Displays logical RAID volume name.

	   RAID Status	   Displays RAID status as either RESYNCING (disks are syncing), DEGRADED RAID is operating with  reduced  functionality),
			   OK (operating optimally), or FAILED (non-functional).

	   RAID Disk	   Displays RAID disk name.

	   Disk Status	   Displays disk status as either OK or FAILED.

EXAMPLES

       Example 1: Creating the RAID Configuration

       The following command creates the RAID configuration:

       # raidctl -c c0t0d0 c0t1d0
       RAID Volume 'c0t0d0' created

       Example 2: Displaying the RAID Configuration

       The following command displays the RAID configuration:

       # raidctl
       RAID	 RAID	   RAID      Disk
       Volume	 Status    Disk      Status
       ----------------------------------------
       c0t0d0	 RESYNCING c0t0d0    OK
			   c0t1d0    OK

       Example 3: Deleting the RAID Configuration

       The following command deletes the RAID configuration:

       # raidctl -d c0t0d0
       RAID Volume 'c0t0d0' deleted

       Example 4: Updating Flash Images on the Controller

       The following command updates flash images on the controller:

       # raidctl -F lsi1030.fw 0
       Update flash image on controller 0? (y/N): y
       Flash updated successfully

EXIT STATUS

       The following exit values are returned:

       0	Successful completion.

       1	Invalid command line input.

       2	Request operation failed.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       attributes(5)

       System Administration Guide: Basic Administration

SunOS 5.10							    17 Aug 2004 						       raidctl(1M)