second tape drive on SCO 505 Post: 51470

8 More Discussions You Might Find Interesting

1. IP Networking

Roteamento No Sco 505

Right now, i have an SCO 505 with IP, GATEWAY e MASK configured. I have one router that is my gateway. The SCO is able to connect to all of the local computers, including the router. However, i�m not unable to ping anything that is not local with SCO. I believe I tried setting the...

2. UNIX for Advanced & Expert Users

Tape Drive SCO 5.0.7

Hi guys I had a system running 5.0.6 , we upgraded it to 5.0.7 everything was fine till i try to do a test backup. The error was cannot open (cannot open /dev/xct0 no such file or directory)what i did was, removed the tape , reboot the system and the try to install it again, but its...

3. UNIX for Dummies Questions & Answers

vncserver on SCo 505

I have installed vnc on my SCO 505 box. its running fin, but when I start a session and connect to it from my win machine I do get an Xsession but I only get an xterm and thats it. I know my settings are in my //.vnc/xstartup file but what exactly am I supposed to see there. will some one send...

4. SCO

Tape drive issues with SCO 5.0.5!!!

Hi Don't know if anyone will be able to help, but we're currently having problems with our external tape drive on our SCO server. If I try the following command for instance, "tar cvf /dev/rStp0", the tape drive jumps into action for a while, then comes back with the error "tar: cannot open:...

5. UNIX for Dummies Questions & Answers

SCO 5.0.5 Tape Drive errors

hi guys, I.m trying to remove and add a new tape drive by using the mkdev tape command and when i try to update the Kernel this is what i'm getting, i386ld: Symbol Sdsk_no_tag in /var/opt/K/SCO/link/1.1.1Eb/etc/conf/pack.d/blad/s pace.o is multiply defined. First defined in...

6. SCO

SCO hard drive with data - No SCO computer

Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux...

7. SCO

SCO Openserver Release 5 and HP VS160 Tape Drive

Hi, Does anyone know if a HP VS160 Tape drive will work with SCO Openserver Release 5? If so what driver would it use? alad, cha? Thanks John

8. SCO

SCO 5.0.7 Tape Drive swap

Our tape drive died and I installed a newer Quantum DAT72 drive in it's place with the same SCSI ID. It still works, but with one major flaw, the system will lock up if I try to upgrade BackupEDGE or view NFS settings in scoadmin. I get a Transition to ready failure on ha=0* message when the...

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)