BitTorrent port 6969 blocked... how to get around the blocked port Post: 50952

7 More Discussions You Might Find Interesting

1. Post Here to Contact Site Administrators and Moderators

IP Blocked

When I try to view these forums from work, I get a message that my IP has been blocked. Please advise as to how to fix this situation. My IP at work comes from the following class B network: 128.226.X.X (Binghamton University) Thanks.

2. IP Networking

Unknown open port: "6881/tcp open bittorrent-tracker" found with nmap

Hi. I ran nmap on my server, and I get the following: Starting Nmap 4.76 ( http://nmap.org ) at 2009-03-19 16:33 EDT Interesting ports on -------- (-----): Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 6881/tcp open bittorrent-tracker The...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

5. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

6. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

7. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT SUSE

transmission-qt

TRANSMISSION-QT(1)					    BSD General Commands Manual 					TRANSMISSION-QT(1)

NAME

     transmission-qt -- a bittorrent client

SYNOPSIS

     transmission-qt -h
     transmission-qt [options] [torrent-file ...]

DESCRIPTION

     transmission-qt is a fast and easy BitTorrent client.

     BitTorrent is a peer-to-peer file transfer protocol which uses a metainfo file (usually with the .torrent file extension) and a central
     tracker to distribute file data amongst a group of peers. For more information on the BitTorrent protocol see http://www.bittorrent.org/

OPTIONS

     -h --help
	     Show help options

     -g, --config-dir directory
	     Where to look for configuration files. This can be used to swap between using the cli, daemon, gtk, and qt clients.  See
	     http://trac.transmissionbt.com/wiki/ConfigFiles for more information.

     -m --minimized
	     Start minimized in notification area

     -p, --port port
	     Port to use when connecting to an existing session

     -r, --remote host
	     Connect to an existing session at the specified hostname

     -u, --username username
	     Username to use when connecting to an existing session

     -v, --version
	     Show version number and exit

     -w, --password password
	     Password to use when connecting to an existing session

     Multiple .torrent files may be added at startup by appending them on the command line. If transmission-qt is already running, the torrents
     will be added to the running instance.

ENVIRONMENT

     TRANSMISSION_HOME
		 Sets the default config-dir.

FILES

     ~/.config/transmission
	     The config-dir used when neither [TRANSMISSION_HOME] nor [-g] is specified.

AUTHORS

     transmission-qt was written by Jordan Lee, Josh Elsasser, Eric Petit, and Mitchell Livingston.

SEE ALSO

     transmission-create(1), transmission-daemon(1), transmission-edit(1), transmission-gtk(1), transmission-qt(1), transmission-remote(1),
     transmission-show(1)

     http://www.transmissionbt.com/

								   June 26, 2010