BitTorrent port 6969 blocked... how to get around the blocked port Post: 50477

7 More Discussions You Might Find Interesting

1. Post Here to Contact Site Administrators and Moderators

IP Blocked

When I try to view these forums from work, I get a message that my IP has been blocked. Please advise as to how to fix this situation. My IP at work comes from the following class B network: 128.226.X.X (Binghamton University) Thanks.

2. IP Networking

Unknown open port: "6881/tcp open bittorrent-tracker" found with nmap

Hi. I ran nmap on my server, and I get the following: Starting Nmap 4.76 ( http://nmap.org ) at 2009-03-19 16:33 EDT Interesting ports on -------- (-----): Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 6881/tcp open bittorrent-tracker The...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

5. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

6. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

7. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT OPENSOLARIS

port_alert

port_alert(3C)						   Standard C Library Functions 					    port_alert(3C)

NAME

       port_alert - set a port in alert mode

SYNOPSIS

       #include <port.h>

       int port_alert(int port, int flags, int events, void *user);

DESCRIPTION

       The  port_alert()  function  transitions a port into or out of alert mode.  A port in alert mode immediately awakens all threads blocked in
       port_get(3C) or port_getn(3C). These threads return with an alert notification that consists of a single port_event_t  structure  with  the
       source  PORT_SOURCE_ALERT.  Subsequent threads trying to retrieve events from a port that is in alert mode will return immediately with the
       alert notification.

       A port is transitioned into alert mode by calling the port_alert() function with a non-zero events parameter.   The  specified  events  and
       user  parameters will be made available in the portev_events and the portev_user members of the alert notification, respectively. The flags
       argument determines the mode of operation of the alert mode:

	   o	  If flags is set to PORT_ALERT_SET, port_alert() sets the port in alert mode independent of the current state of the  port.   The
		  portev_events and portev_user members are set or updated accordingly.

	   o	  If  flags is set to PORT_ALERT_UPDATE and the port is not in alert mode, port_alert() transitions the port into alert mode.  The
		  portev_events and portev_user members are set accordingly.

	   o	  If flags is set to PORT_ALERT_UPDATE and the port is already in alert mode, port_alert() returns with an error value of EBUSY.

       PORT_ALERT_SET and PORT_ALERT_UPDATE are mutually exclusive.

       A port is transitioned out of alert mode by calling the port_alert() function with a zero events parameter.

       Events can be queued to a port that is in alert mode, but they will not be retrievable until the port is transitioned out of alert mode.

RETURN VALUES

       Upon succesful completion, 0 is returned. Otherwise, -1 is returned and errno is set to indicate the error.

ERRORS

       The port_alert() function will fail if:

       EBADF	 The port identifier is not valid.

       EBADFD	 The port argument is not an event port file descriptor.

       EBUSY	 The port is already in alert mode.

       EINVAL	 Mutually exclusive flags are set.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |all			   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsr, SUNWhea		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+
       |MT-Level		     |Safe			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       port_associate(3C), port_create(3C), port_get(3C), port_send(3C), attributes(5)

SunOS 5.11							    1 Oct 2003							    port_alert(3C)