04-16-2004
It's probably easiest to do it during the install. Burn the isos to CD, start the install, and either select auto partition, disk druid (my preference), or fdisk. If you currently have linux working on the system, 'dmesg | grep hd' will list the ide drives, 'dmesg |grep ida' will show the drives if you have a proliant box, and 'dmesg |grep sd' will show the SCSI drives. You can then use fdisk to partition them and mkfs or mke2fs to format them. However, during the install you will have to redo much of this anyway because the installer will not know which partition is for which mount point. Bottom line, just do it during the install.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I just finished installing Solaris 5.8 and I tried to install StarOffice, it said I was out of room. Now I have a 3 gig HD and I THOUGHT that I gave 512 to swap and kept the rest for storage room.
How do I check how much room I have, how would I if I figured out I don't have enough room add... (5 Replies)
Discussion started by: veitcha
5 Replies
2. UNIX for Advanced & Expert Users
I'm trying to compile and install both most recent version of 'make' and the
most recent version of 'openssh' on my Sparc20.
I've run into the following problems... and I don't know what they mean. Can
someone please help me resolve these issues?
I'm using the 'make' version that was... (5 Replies)
Discussion started by: xyyz
5 Replies
3. UNIX for Dummies Questions & Answers
hi,
1) is logical partition the same as physical partition except that one is physical and the other is logical?
2) then it must a one to one ratio? (3 Replies)
Discussion started by: yls177
3 Replies
4. UNIX for Dummies Questions & Answers
I've created a partition with GNU Parted, how do I mount the partition?
The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards.
Thanks,
--Todd (1 Reply)
Discussion started by: jtp51
1 Replies
5. Solaris
Solaris 10 5/08 on Ultra 40 M2
It boots fine off primary disk but having issues booting off the mirror disk.
I get this error when booting off mirror disk:
Booting 'Solaris 10 ... Mirror disk'
root (hd1,0,a)
Error 22: No such partition
Press any key to continue...
Any... (7 Replies)
Discussion started by: etc
7 Replies
6. Shell Programming and Scripting
Gentleman,
Please move if I have chose the incorrect forum section. I am trying to move data that is not backed up from partition 1 to partition 2 on a SAN that has a GFS2 filesystem. Since the data is not backed up I am rsyncing this data and once verified I will delete from the source... (6 Replies)
Discussion started by: jaysunn
6 Replies
7. Solaris
hi all
while formatting hard disk i am getting following error.
Partition 1 ends at 266338338
It must be between 34 and 143374704.
label error: EFI Labels do not support overlapping partitions
Partition 8 overlaps partition 1.
Warning: error writing EFI.
Label failed.
I have formatted the... (2 Replies)
Discussion started by: nikhil kasar
2 Replies
8. Filesystems, Disks and Memory
Hi Experts
I would like to know different between soft partition concept and hard partition concept on solaris.
Here is little explanation between soft partition concept and hard partition concept on solaris.
Soft Partition:
1TB total space available in storage in all mapped to the OS to... (2 Replies)
Discussion started by: edydsuranta
2 Replies
9. Red Hat
Hello All,
I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows,
/boot - Linux Partition & another is
LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc).
Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Discussion started by: gr8_usk
5 Replies
10. Debian
Hello, i'm trying to set up a machine with an encrypted filesystem. It's a Debian 9/i386.
The partition table on /dev/sda
1. 1 MiB BIOS BOOT (04) N/A N/A
2. 256 MiB Linux (83) ext4 /boot
3. 2304 MiB Linux (83) ext4 /
4. 1 MiB MINIX (81) N/A N/A
5. 510 MiB Linux... (7 Replies)
Discussion started by: tyuxar
7 Replies
CFDISK(8) GNU fdisk Manual CFDISK(8)
NAME
GNU fdisk, lfdisk, gfdisk - manipulate partition tables on a hard drive
SYNOPSIS
fdisk [options] [device]
DESCRIPTION
fdisk is a disk partition manipulation program, which allows you to create, destroy, resize, move and copy partitions on a hard drive using
a menu-driven interface. It is useful for organising the disk space on a new drive, reorganising an old drive, creating space for new oper-
ating systems, and copying data to new hard disks. For a list of the supported partition types, see the --list-partition-types option
below.
It comes in two variants, gfdisk and lfdisk. Lfdisk aims to resemble Linux fdisk 2.12, while gfdisk supports more advanced disk operations,
like resizing the filesystem, moving and copying partitions. When starting fdisk, the default is to run gfdisk.
OPTIONS
-h, --help
displays a help message.
-v, --version
displays the program's version.
-L, --linux-fdisk
turns on Linux fdisk compatibility mode. This is the same as running lfdisk.
-G, --gnu-fdisk
turns off Linux fdisk compatibility mode.
-i, --interactive
where necessary, prompts for user intervention.
-p, --script
never prompts for user intervention.
-l, --list
lists the partition table on the specified device and exits. If there is no device specified, lists the partition tables on all
detected devices.
-r, --raw-list
displays a hex dump of the partition table of the disk, similar to the way Linux fdisk displays the raw data in the partition table.
-u, --sector-units
use sectors, instead of cylinders for a default unit.
-s, --size=DEVICE
prints the size of the partition on DEVICE is printed on the standard output.
-t, --list-partition-types
displays a list of supported partition types and features.
The following options are available only to lfdisk.
-b, --sector-size=SIZE
Specify the sector size of the disk. Valid values are 512, 1024 and 2048. Should be used only on older kernels, which don't guess
the correct sector size.
-C, --cylinders=CYLINDERS
Specify the number of cylinders of the disk. Currently does nothing, it is left for Linux fdisk compatibility.
-H, --heads=HEADS
Specify the number of heads of the disk. Reasonable values are 255 or 16.
-S, --sectors=SECTORS
Specify the number of sectors per track. A reasonable value is 63.
BUGS
Before editing a BSD disklabel, the partition with the disklabel should already exist on the disk and be detected by the OS. If you have
created a BSD-type partition, you need to write the changes to the disk. If fdisk fails to notify the OS about the changes in partition ta-
ble, you need to restart your computer. As fdisk tries to guess the device holding the BSD disklabel, it might fail to edit it at all, even
if the OS has detected it. In this case you are adviced to simply open the device with fdisk directly. It is possible that it doesn't work
on some operating systems.
Getting the size of a partition with -s might fail, if fdisk fails to guess the disk device, for the same reasons as with the previous bug.
SEE ALSO
mkfs(8), cfdisk(8), parted(8) The fdisk program is fully documented in the info(1) format GNU fdisk User Manual manual.
fdisk 18 August, 2006 CFDISK(8)