04-14-2004
OK...got the blocks...and /2...makes sense...I can see that now.
I guess /tmp and /var/run are created virtually by default upon installation and 'share' the total swap space(7050128 approx) but it is listed as if they both have 7050128 available.
How about the vfstab file....
swap - /tmp tmpfs - yes -
I understand that this means:
device to mount = swap (as seen in 'df -k')
device to fsck = - (raw name -no applicable device)
mount point = /tmp (as seen in 'df -k')
FS type = tmpfs This is a type of filesystem??
fsck pass = - (do not check file systems)
mount at boot = yes
mount options = - (no mount options)
The tmpfs is another filesystem?...and How come '/var/run' is not listed in vfstab and /tmp is?
Thanks again.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
When i re-updated my system i set my swap at 500 MB. I have 256 in ram and have never even gone into the 250 mb of swap that i had originally configured. How do I reduce the swap? (3 Replies)
Discussion started by: macdonto
3 Replies
2. UNIX for Dummies Questions & Answers
Is it really so that if swap will be located in the begining of hard drive, than it will work faster? (1 Reply)
Discussion started by: Ty3
1 Replies
3. Solaris
Hello and thanks in advance.
I have a Sun box with raid 1 on the O/S disks using solaris svm.
I want to unmirror my swap partition, and add the slice on the second disk as an additional swap device. This would give me twice as much swap space.
I have been warned not to do this by some... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
4. HP-UX
I have a HP-UX B.11.23 server with 16 gb of memory 84 gb of swap configured. I am being pushed to define more swap to try and get more Tuxedo domains to start. At what point do we have too much swap for the amount of memory? Thanks in advance. (11 Replies)
Discussion started by: scotbuff
11 Replies
5. Red Hat
free -m : 1023 total swap space
created default partition /dev/sdb1 50M using fdisk. i did write the changes.
#mkswap /dev/sdb1
#swapon /dev/sdb1
free -m : 1078 total swap space
this shows that the swap is on
Question : i did not change the type LINUX SWAP (82) in fdisk.
so why is... (5 Replies)
Discussion started by: dplinux
5 Replies
6. HP-UX
Hi
I have an integrity machine rx7620 and rx8640 running hp-ux 11.31. I'm planning to fine tune the system:
- I would like to know when does the memory swap space spill over to the device swap space?
- And how much % of memory swap utilization should be specified (swap space device... (6 Replies)
Discussion started by: lamoul
6 Replies
7. Homework & Coursework Questions
1.) I am to write scripts that will be phasetest folder in the home directory.
2.) The folder should have a set-up,phase and display files
I have written a small script which i used to check for the existing users and their password.
What I need help with:
I have a set of questions in a... (19 Replies)
Discussion started by: moraks007
19 Replies
8. Red Hat
Hi,
I have added a new disk to production server. How to make it visible to os and how to configure it. I also want to add some space from that disk to swap space. Please help me out. (1 Reply)
Discussion started by: chetansingh23
1 Replies
9. Solaris
Hi,
Can somebody please help here, since iam just a beginner.
According to my book knowledge.
the Avalilable memory calculated by swap -l (includes only swap) should be small as compared to swap -s value(includes Virtual memory=swap +physical).
but this is quite opposite in my case.
swap... (6 Replies)
Discussion started by: Laxxi
6 Replies
10. Solaris
Hi Solaris Folks :),
I need to calculate the swap usage on solaris server, please let me understand the output of below swap -s and swap -l commands.
$swap -s
total: 1774912k bytes allocated + 240616k reserved = 2015528k used, 14542512k available
$swap -l
swapfile dev swaplo... (6 Replies)
Discussion started by: seenuvasan1985
6 Replies
CFDISK(8) GNU fdisk Manual CFDISK(8)
NAME
GNU fdisk, lfdisk, gfdisk - manipulate partition tables on a hard drive
SYNOPSIS
fdisk [options] [device]
DESCRIPTION
fdisk is a disk partition manipulation program, which allows you to create, destroy, resize, move and copy partitions on a hard drive using
a menu-driven interface. It is useful for organising the disk space on a new drive, reorganising an old drive, creating space for new oper-
ating systems, and copying data to new hard disks. For a list of the supported partition types, see the --list-partition-types option
below.
It comes in two variants, gfdisk and lfdisk. Lfdisk aims to resemble Linux fdisk 2.12, while gfdisk supports more advanced disk operations,
like resizing the filesystem, moving and copying partitions. When starting fdisk, the default is to run gfdisk.
OPTIONS
-h, --help
displays a help message.
-v, --version
displays the program's version.
-L, --linux-fdisk
turns on Linux fdisk compatibility mode. This is the same as running lfdisk.
-G, --gnu-fdisk
turns off Linux fdisk compatibility mode.
-i, --interactive
where necessary, prompts for user intervention.
-p, --script
never prompts for user intervention.
-l, --list
lists the partition table on the specified device and exits. If there is no device specified, lists the partition tables on all
detected devices.
-r, --raw-list
displays a hex dump of the partition table of the disk, similar to the way Linux fdisk displays the raw data in the partition table.
-u, --sector-units
use sectors, instead of cylinders for a default unit.
-s, --size=DEVICE
prints the size of the partition on DEVICE is printed on the standard output.
-t, --list-partition-types
displays a list of supported partition types and features.
The following options are available only to lfdisk.
-b, --sector-size=SIZE
Specify the sector size of the disk. Valid values are 512, 1024 and 2048. Should be used only on older kernels, which don't guess
the correct sector size.
-C, --cylinders=CYLINDERS
Specify the number of cylinders of the disk. Currently does nothing, it is left for Linux fdisk compatibility.
-H, --heads=HEADS
Specify the number of heads of the disk. Reasonable values are 255 or 16.
-S, --sectors=SECTORS
Specify the number of sectors per track. A reasonable value is 63.
BUGS
Before editing a BSD disklabel, the partition with the disklabel should already exist on the disk and be detected by the OS. If you have
created a BSD-type partition, you need to write the changes to the disk. If fdisk fails to notify the OS about the changes in partition ta-
ble, you need to restart your computer. As fdisk tries to guess the device holding the BSD disklabel, it might fail to edit it at all, even
if the OS has detected it. In this case you are adviced to simply open the device with fdisk directly. It is possible that it doesn't work
on some operating systems.
Getting the size of a partition with -s might fail, if fdisk fails to guess the disk device, for the same reasons as with the previous bug.
SEE ALSO
mkfs(8), cfdisk(8), parted(8) The fdisk program is fully documented in the info(1) format GNU fdisk User Manual manual.
fdisk 18 August, 2006 CFDISK(8)