Um, this is lacking sense Post: 4967

8 More Discussions You Might Find Interesting

1. Linux Benchmarks

Linux Benchmarks Makes No Sense

I created two computers with identical hardware, and run the benchmark programs in both starting at the same exact time. What makes no sense is that the computer that has the lower average index (121) finished the race a good 30 minutes ahead of the computer wich showed the higher avg index...

2. UNIX for Dummies Questions & Answers

Simple grep - Not sure it makes sense!

I have 3 files in directory mydir named as follows, I run the sequence of commands shown below and I have questions at the result. File names are: ABC_GP0 ABC_GP0.ctl ABC_GPX Commands and results: $ ls /mydir/ | grep * <-- (q1) I get nothing - OK $ ls /mydir/ | grep...

3. Solaris

Sense Key: Media Error

Hi all, We have below WARNING in /var/adm/messages file from our Solaris server. WARNING: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0 (sd0): Error for Command: write(10) Error Level: Fatal Requested Block: 16745265 Error Block: 16745269 Vendor: SEAGATE Serial Number:...

4. UNIX for Dummies Questions & Answers

trying to make sense of rsync output...

I'm running the following rsync command to sync a directory between the 2 servers: rsync -az --delete --stats /some_dir/ server_name:/some_dir I'm getting the following output: Number of files: 655174 Number of files transferred: 14221 Total file size: 1138531979331 bytes Total...

5. Shell Programming and Scripting

diff result makes no sense

Hi, I have written a small shellscript Imagine dbalt.txt already existed... " .... touch report.txt lynx -dump "http://site.com/index.htm" > site1.txt lynx -dump "http://site.com/index2.htm" > site2.txt grep -E 'Nummer: |EUR' site1.txt > preis1.txt grep -E 'Nummer: |EUR' site2.txt >...

6. UNIX for Dummies Questions & Answers

Homework questions, book is lacking answers?

Hey you guys, There's a couple questions I cannot find the answers to anywhere in this book for my Operating Systems class, hopefully you guys could help. I believe we are in the Bourne shell. 1. Match each description to the appropriate type of variable Used in shell programs ...

7. UNIX for Advanced & Expert Users

sar -d output... does not make sense

Can someone explain the correlation between how sar names the disk drives and how the rest of the OS names the disk drives? sar lists my disk drives as sd0, sd1, sd2, etc..... while format lists my disk drives as c1t0d0, c1t1d0, c1t2d0,etc... And also why sar shows 8 disks but format...

8. AIX

Sense Data Layout

On AIX 7.1 we have errors with SC_DISK_ERR4 label. In document "Fibre Channel Planning and Integration: User's Guide and Service Information" I can find SENSE Data description in section "PCI Fibre Channel Adapter, SCSI-3 Protocol (Disk, CD-ROM, Read/Write Optical Device) Error Log Sense...

LEARN ABOUT MOJAVE

installgrub

installgrub(1M)                                                                                                                    installgrub(1M)

NAME

       installgrub - install GRUB in a disk partition or a floppy

SYNOPSIS

       /sbin/installgrub [-fm] stage1 stage2 raw-device

       The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.

       installgrub  installs  GRUB  stage  1  and  stage  2  files on the boot area of a disk partition. If you specify the -m option, installgrub
       installs the stage 1 file on the master boot sector of the disk.

       The installgrub command accepts the following options:

       -f

           Suppresses interaction when overwriting the master boot sector.

       -m

           Installs GRUB stage1 on the master boot sector interactively.

       The installgrub command accepts the following operands:

       stage1

           The name of the GRUB stage 1 file.

       stage2

           The name of the GRUB stage 2 file.

       raw-device

           The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable.  For  disk
           devices,  specify  the  slice  where  the  GRUB  menu  file  is  located.  (For Solaris it is the root slice.) For a floppy disk, it is
           /dev/rdiskette.

       Example 1: Installing GRUB on a Hard Disk Slice

       The following command installs GRUB on a system where the root slice is c0d0s0:

       example# /sbin/installgrub /boot/grub/stage1 
                /boot/grub/stage2 /dev/rdsk/c0d0s0

       Example 2: Installing GRUB on a Floppy

       The following command installs GRUB on a formatted floppy:

       example# mount -F pcfs /dev/diskette /mnt
       # mkdir -p /mnt/boot/grub
       # cp /boot/grub/* /mnt/boot/grub
       # umount /mnt
       # cd /boot/grub
       # /sbin/installgrub stage1 stage2 /dev/rdiskette

       /boot/grub

           Directory where GRUB files reside.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWcsu                      |
       +-----------------------------+-----------------------------+
       |Interface Stability          |Evolving                     |
       +-----------------------------+-----------------------------+

       boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)

       Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
       boot the GRUB in the Solaris partition regardless of which fdisk partition is active.

                                                                    24 May 2005                                                    installgrub(1M)