Service processor not responding Post: 49475

6 More Discussions You Might Find Interesting

1. AIX

connecting to service processor on 44P 170

I dont have an ascii terminal to hook upto this thing, trying to use my laptop but it doesnt seem to want to communicate, is there a special cable i should be using for this?

2. AIX

LPAR processor/virtual processor settings

Question is on setting of Physical and Virtual processors for LPARs to make proper use of virtualization capabilities. Environment is a 8-way p570 with 4 LPARs. lparVIO1 and lparVIO2: AIX 5300-04-01 Mode/Type= Shared-SMT/Capped Minimum Processors= 0.10 Desired Processors= 0.50 Maximum...

3. AIX

Connecting to the service processor?

Hi Folks, I am a new AIX user. This is my first post in the UNIX forums. I did do a little bit of search before creating this post, but did not find any conclusive information. I am trying to connect to the service processor of an older 44p Model 170 box using my laptop. The 44p box has two...

4. AIX

Processor and processor core

Guys... Hows it going??? I have been going through the hardware spec of IBM system p systems.. and here i am confused for IBM Power 520 Express it says Processor cores: One, two or four 64-bit 4.2 GHz POWER6 with AltiVec� SIMD and Hardware Decimal Floating-Point acceleration ...

5. AIX

p520 Service Processor's IP

picked up this old p520 , try many ways to connect to the SP.. a) null modem using a PC connecting to the lower S1 ...but see a bunch of garbages across the screen once the main machine is off b) try guessing the default IPs 192.168.3.147 and 192.168.2.147, for ports HMC1 and HMC2 no...

6. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT OSF1

psradm

psradm(8)						      System Manager's Manual							 psradm(8)

NAME

       psradm, offline, online - Stops and starts processors in a multiprocessor system

SYNOPSIS

       /usr/sbin/psradm -f  [-v] [[-a] [processor_id...]]

       /usr/sbin/psradm -n  [-v] [[-a] [processor_id...]]

       /usr/sbin/online [-v] [processor_id...]

       /usr/sbin/offline [-v] [processor_id...]

OPTIONS

       The following options apply only to the psradm command: Specifies that all the processors except the master processor be put off line or on
       line.  Puts the specified processor off line.  Puts the specified processor on line.

       The following option applies to all forms of the command: Displays a message about the status of the operation performed on each processor.

DESCRIPTION

       On a multiprocessor system, the psradm command puts one or more processors off line (stops a processor) or on line (starts a processor).

       The processor_id variable specifies an integer that uniquely identifies a processor.  Use the psrinfo command to display processor  identi-
       fication numbers.

       The  offline  command puts one or more processors off line (stops a processor).	If no processors are specified, all processors that are on
       line are stopped except the master processor.

       The online command puts one or more processors on line (starts a processor).  If no processors are specified, all processors that  are  off
       line are started.

       Note that you cannot use these commands to start or stop the master processor in a multiprocessor system.

       You must be the root user to use this command.

       The /var/adm/wtmp file contains information about successful processor state transitions.

RESTRICTION

       Do not use the psradm command to disable CPUs when benchmarking performance, because the command does not provide an accurate reflection of
       the performance of a system that actually has fewer CPUs.  Accurate performance results are obtained only when you disable the CPUs at  the
       SRM console command level.

EXAMPLES

       The  following command puts processors 2 and 3 off line: # psradm -f 2 3 The following command puts all the processors on line: # psradm -n
       -a The following command puts all processors on line: # online -v

FILES

SEE ALSO

       Commands: pset_info(1), psrinfo(1)

       Files: processor_sets(4)

																	 psradm(8)