04-02-2004
shucks haha just as i though, i set the wrong HD ... is there any way to write to my second hard drive...like in windows you have c: d: e: etc... can i do that here? I've only got about 2 gigs left free and i've got another 20 gig sitting doing nothing haha.
When i run the dmesg |grep hd command i get hda and hdb so i'm assuming that it picks up my 2 hard drives.
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPD3084AT, ATA DISK drive
hdb: WDC WD200BB-00CXA0, ATA DISK drive
hdc: LG CD-RW CED-8120B, ATAPI CDROM drive
hdd: LTN483, ATAPI CDROM drive
hda: FUJITSU MPD3084AT, 8063MB w/512kB Cache, CHS=1027/255/63
hdb: WDC WD200BB-00CXA0, 19092MB w/2048kB Cache, CHS=38792/16/63
hda: hda1
hdb: hdb1
But i've got it writing files to the wrong one...i want it to write all my big files that i transfer to hdb1...is there any way i can do this?
[root@linksys /root]# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda1 8119744 5895872 1811408 77% /
Last edited by Perderabo; 04-23-2004 at 01:50 PM..
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have suns machine that holds two hard drives. I only used one. I tryed to make a lan network with my windows xp. When I tryed to restart the machine it wanted to a password. when before I just typed root to log in. So i edited the etc dir. big mistake. So now the machine will not read the hard... (2 Replies)
Discussion started by: victbla
2 Replies
2. UNIX for Dummies Questions & Answers
Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a... (5 Replies)
Discussion started by: xcaliber
5 Replies
3. SCO
I trying to learn Unix and I am using SCO Unixware 7.1. Below are three question that I have:
1) Can someone tell me what command I can use to find out the system processor speed.
2) Can someone tell me what command I can use to find out what's the hard drive size of my unix box.
3) Can... (1 Reply)
Discussion started by: etaup02
1 Replies
4. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. Filesystems, Disks and Memory
Hi,
I just set up a raid Z array in solaris xpress and I notice that the drives feel pretty damn hot. I use speedfan to monitor the temperatures of the hard drives in XP. Is there a similar program for solrais? I assume there would be since the drives all have temp sensors in them, but I... (2 Replies)
Discussion started by: ciscocbee
2 Replies
7. Red Hat
I am running FC-7 which I realize is an older distro. But my question would apply to any distro.
I ran fsck on my mounted file system (I know, I shouldn't have). Now it won't boot. I get a kernel panic message.
I booted to a Knoppix Live Cd.
The desktop icon shows /dev/sda2 mounted at... (4 Replies)
Discussion started by: 2buck56
4 Replies
8. Red Hat
Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies
9. UNIX for Advanced & Expert Users
I have connected an external hard drive. I can't find it.
Both ls /media, fdisk -l and ls /dev show nothing.
TIA (3 Replies)
Discussion started by: Meow613
3 Replies
LEARN ABOUT MOJAVE
mkfs.minix
MKFS.MINIX(8) System Administration MKFS.MINIX(8)
NAME
mkfs.minix - make a Minix filesystem
SYNOPSIS
mkfs.minix [options] device [size-in-blocks]
DESCRIPTION
mkfs.minix creates a Linux MINIX filesystem on a device (usually a disk partition).
The device is usually of the following form:
/dev/hda[1-8] (IDE disk 1)
/dev/hdb[1-8] (IDE disk 2)
/dev/sda[1-8] (SCSI disk 1)
/dev/sdb[1-8] (SCSI disk 2)
The device may be a block device or a image file of one, but this is not enforced. Expect not much fun on a character device :-).
The size-in-blocks parameter is the desired size of the file system, in blocks. It is present only for backwards compatibility. If omit-
ted the size will be determined automatically. Only block counts strictly greater than 10 and strictly less than 65536 are allowed.
OPTIONS
-c, --check
Check the device for bad blocks before creating the filesystem. If any are found, the count is printed.
-n, --namelength length
Specify the maximum length of filenames. Currently, the only allowable values are 14 and 30 for file system versions 1 and 2. Ver-
sion 3 allows only value 60. The default is 30.
-i, --inodes number
Specify the number of inodes for the filesystem.
-l, --badblocks filename
Read the list of bad blocks from filename. The file has one bad-block number per line. The count of bad blocks read is printed.
-1 Make a Minix version 1 filesystem. This is the default.
-2, -v Make a Minix version 2 filesystem.
-3 Make a Minix version 3 filesystem.
-V, --version
Display version information and exit. The long option cannot be combined with other options.
-h, --help
Display help text and exit.
EXIT CODES
The exit code returned by mkfs.minix is one of the following:
0 No errors
8 Operational error
16 Usage or syntax error
SEE ALSO
fsck(8), mkfs(8), reboot(8)
AVAILABILITY
The mkfs.minix command is part of the util-linux package and is available from https://www.kernel.org/pub/linux/utils/util-linux/.
util-linux June 2015 MKFS.MINIX(8)