Sponsored Content
Full Discussion: hard drive specs?
Operating Systems Linux hard drive specs? Post 49471 by byblyk on Friday 2nd of April 2004 12:06:25 AM
Old 04-02-2004
shucks haha just as i though, i set the wrong HD ... is there any way to write to my second hard drive...like in windows you have c: d: e: etc... can i do that here? I've only got about 2 gigs left free and i've got another 20 gig sitting doing nothing haha.

When i run the dmesg |grep hd command i get hda and hdb so i'm assuming that it picks up my 2 hard drives.

ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPD3084AT, ATA DISK drive
hdb: WDC WD200BB-00CXA0, ATA DISK drive
hdc: LG CD-RW CED-8120B, ATAPI CDROM drive
hdd: LTN483, ATAPI CDROM drive
hda: FUJITSU MPD3084AT, 8063MB w/512kB Cache, CHS=1027/255/63
hdb: WDC WD200BB-00CXA0, 19092MB w/2048kB Cache, CHS=38792/16/63
hda: hda1
hdb: hdb1

But i've got it writing files to the wrong one...i want it to write all my big files that i transfer to hdb1...is there any way i can do this?

[root@linksys /root]# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda1 8119744 5895872 1811408 77% /

Last edited by Perderabo; 04-23-2004 at 01:50 PM..
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

reading the hard drive

I have suns machine that holds two hard drives. I only used one. I tryed to make a lan network with my windows xp. When I tryed to restart the machine it wanted to a password. when before I just typed root to log in. So i edited the etc dir. big mistake. So now the machine will not read the hard... (2 Replies)
Discussion started by: victbla
2 Replies

2. UNIX for Dummies Questions & Answers

currupted my hard drive

Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a... (5 Replies)
Discussion started by: xcaliber
5 Replies

3. SCO

Processor and Hard Drive

I trying to learn Unix and I am using SCO Unixware 7.1. Below are three question that I have: 1) Can someone tell me what command I can use to find out the system processor speed. 2) Can someone tell me what command I can use to find out what's the hard drive size of my unix box. 3) Can... (1 Reply)
Discussion started by: etaup02
1 Replies

4. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies

5. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies

6. Filesystems, Disks and Memory

Hard Drive Temperature?

Hi, I just set up a raid Z array in solaris xpress and I notice that the drives feel pretty damn hot. I use speedfan to monitor the temperatures of the hard drives in XP. Is there a similar program for solrais? I assume there would be since the drives all have temp sensors in them, but I... (2 Replies)
Discussion started by: ciscocbee
2 Replies

7. Red Hat

Corrupted Hard Drive

I am running FC-7 which I realize is an older distro. But my question would apply to any distro. I ran fsck on my mounted file system (I know, I shouldn't have). Now it won't boot. I get a kernel panic message. I booted to a Knoppix Live Cd. The desktop icon shows /dev/sda2 mounted at... (4 Replies)
Discussion started by: 2buck56
4 Replies

8. Red Hat

Hard drive formating

Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies

9. UNIX for Advanced & Expert Users

External hard drive

I have connected an external hard drive. I can't find it. Both ls /media, fdisk -l and ls /dev show nothing. TIA (3 Replies)
Discussion started by: Meow613
3 Replies
HD(4)							     Linux Programmer's Manual							     HD(4)

NAME
hd - MFM/IDE hard disk devices DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave hdd. General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi- cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions on an IDE disk. For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the second one. They are typically created by: mknod -m 660 /dev/hda b 3 0 mknod -m 660 /dev/hda1 b 3 1 mknod -m 660 /dev/hda2 b 3 2 ... mknod -m 660 /dev/hda8 b 3 8 mknod -m 660 /dev/hdb b 3 64 mknod -m 660 /dev/hdb1 b 3 65 mknod -m 660 /dev/hdb2 b 3 66 ... mknod -m 660 /dev/hdb8 b 3 72 chown root:disk /dev/hd* FILES
/dev/hd* SEE ALSO
chown(1), mknod(1), sd(4), mount(8) COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 1992-12-17 HD(4)
All times are GMT -4. The time now is 09:20 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy