03-24-2004
Bootup Error
Hi all
The following error was displayed when a sco server (5.0.5) was booted. What should be done to overcome the problem. Replies appreciated.
Bios 03.0
0130688 KB memory good
01 processor(s) in system
remote console dialing on, please wait
connect fail : modem off
cpu clock mismatch
cmos battery bad
cmos checksum error
equipment configuration error
which command invokes the remote dialing ??
Raguram R
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi guys,
May I know how to install Solaris 8 in the way that I can triple boot it with my the other two OS: WIndows ME and Windows 2000 Pro.
Can you all please kindly advise me on how to setup the triple boot process inorder to allow Windows ME to be the default OS when being ask to choose... (1 Reply)
Discussion started by: cia
1 Replies
2. Linux
I have a RH 7.3 server that needs a restart today after putting a patch in place. The last time I rebooted this box was almost a year ago and when the uptime is quite long, Linux likes to check all the disks for errors, including the RAID. This adds almost 1.5Hrs to my bootup process:eek: .
Does... (1 Reply)
Discussion started by: turbo90awd
1 Replies
3. UNIX for Advanced & Expert Users
Hello there
I need to run a script whenever i reboot or startup my HP-UX server. This script adds some routes to the route table, and it start third party aplications like "Star Manager".
I thought i could do this simply putting the script in "/sbin/init.d,
and a link to the script in... (7 Replies)
Discussion started by: vascobrito
7 Replies
4. UNIX for Dummies Questions & Answers
Evry time I start up my mavhine ,have to type in unix at
Boot
:
Is there a way unix should bootup automatically?
Asif (2 Replies)
Discussion started by: asif iqbal
2 Replies
5. AIX
Hi i installed ssh of version v 1.21 and my AIX is of 5.3.
I want to start my ssh deamon at the startup
can any one please help me out reg..
Thanks in advance.. (1 Reply)
Discussion started by: kmalla
1 Replies
6. AIX
Hi,
I've got a recent problem with 2 file systems on an AIX 5.3 server. The fs's are marked to auto mount at startup and do show as being mounted after a a restart however if you cd to the mount point and 'df -g .' it shows the fs hasn't actually mounted.
$ mount |grep SQLT0001.0
... (2 Replies)
Discussion started by: m223464
2 Replies
7. UNIX for Advanced & Expert Users
Hi,
I am using a Linux system running at run level 3. I am finding a wired problem, once the system boots, the system terminal slows down, I need to type the characters repeatedly to enter my login and password info. Also running any commands takes time, it stays in this condition for some... (1 Reply)
Discussion started by: cjjoy
1 Replies
8. UNIX for Dummies Questions & Answers
What is the boot up sequence in UNIX? (2 Replies)
Discussion started by: karthi_g
2 Replies
9. Solaris
Hi Folks,
Has anyone seen these errors on bootup.
Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010,
Oracle and/or its affiliates. All rights reserved.
Configuring devices. ... (1 Reply)
Discussion started by: ESSTEAM
1 Replies
10. SCO
I have a known good external SCSI HD running SCO UNIX OpenServer 5.0.7. I decided that I wanted to be able to run this drive on another computer, so I bought the same SCSI card as before (LSI) and then attempted to boot on the other system. The bootup process hung with the error F painit. I've... (13 Replies)
Discussion started by: Transpower
13 Replies
ccr(8) System Manager's Manual ccr(8)
Name
ccr - remote console carrier requester
Syntax
ccr [ options ] node
Description
The command establishes a logical connection between your ULTRIX system and the console carrier server on a remote system. enables your
terminal to act as the console for a remote unattended system. For example, your terminal can act as the console for a Digital Ethernet
Communications Server (DECSA) and its resident software. The node is the name or address of the target node. A node name consists of from
one to six alphanumeric characters. A node address consist of two decimal integers (n.n), where the first indicates the network number
(1-63), and the second indicates the node address (1-1023).
You can use to force a crash if a server node becomes unresponsive. To determine how to force a crash, see the documentation for the
respective server product.
The requirements for using are as follows:
o The host node (that is, your local ULTRIX node) and the remote node must be on the same Ethernet.
o If your server product is a DECSA, the console carrier server image (plutocc.sys) and its loader file (plutowl.sys) must be located in
on your ULTRIX node. The pluocc.sys and plutowl.sys files are not need, nor is any loading done for other servers. For more details,
see the installation guide for the particular server product.
<CTRL/D> exits from console carrier mode and terminates
Options
-c Uses the specified circuit to connect to the target node.
-h Uses the specified address (next argument) as the Ethernet address of the target node.
-n Uses the next argument as the target node ID.
-p Uses the specified service password (next arguments) in accessing the target node.
Examples
# /etc/ccr -c qna-0 -n dallas <RET>
ccr: Remote console reserved
.
.
.
<CTRL/D>
ccr: Remote console released
#
Restrictions
You must have superuser privileges to run
Diagnostics
The command can return the following diagnostic messages:
ccr: Remote console reserved
The command has successfully connected to the remote console server and your terminal is now capable of acting as a console for the remote
node.
ccr: Remote console released
Your connection with the remote console server has been terminated and you are no longer in console carrier mode.
ccr: Remote console already in use
The remote console server that you are attempting to connect to is already reserved by another user.
ccr: Permission denied
You do not have the necessary privileges to run (You must be a superuser.)
ccr: Hardware address required
The command is unable to locate the hardware address of the remote node to which you are attempting to connect. A remote node's hardware
address must be defined either in the command line, or in its nodes database entry. (Nodes database entries are defined with the command.)
ccr: No node entry in database
The command does not recognize the remote node to which you are attempting to connect, since the node-id that you specified is not defined
in the nodes database. (Nodes database entries are defined with the command.)
Files
Console carrier server image
Console carrier server loader
See Also
addnode(8), getnode(8), load(8), remnode(8), trigger(8)
Guide to Local Transport Servers
ccr(8)