cannot find boot device and won't boot off cdrom Post: 48839

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

boot from external cdrom

Could some one please tell the command used to boot from an external SCSI cdrom drive? from PROM level.

2. Solaris

Can't boot from cdrom at ok prompt

I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6 I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:...

3. Solaris

Boot from cdrom

i am having a problem when trying to boot from cdrom. I received the below message system is not bootable, boot command is disabledfound how can i fix this. also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break?

4. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD...

5. Solaris

not able to boot from cdrom

Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args: Can't read disk label Can't open disk label package can,t open boot device ...

6. Solaris

can't boot cdrom

iam traying to install o/s in spark machine it showing error ok >boot cdrom is showing error short disk read failed to read superblock the file just loaded does not appear to excutable how to solve this can u help me

7. Solaris

Boot cdrom - install

Hi community, Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ? Thank you very much:D

8. Boot Loaders

Reboot and Select Proper Boot device or insert Boot media in select Boot device and press a key

Hello, I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error " reboot and select proper Boot device or insert Boot media in select Boot device and press a key " I have tried CD and...

9. Hardware

Cannot boot from scsi cdrom

I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but...

10. UNIX for Beginners Questions & Answers

Cannot boot cdrom -s

Good Afternoon, I'm trying to boot from cdrom so I: bash-2.05# init 0 {1} ok boot cdrom -s and I get: Rebooting with command: boot cdrom -s Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s Can't read disk label. Can't open disk label package Evaluating: Can't open boot...

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

boot from external cdrom

Discussion started by: fishman2001

2. Solaris

Can't boot from cdrom at ok prompt

Discussion started by: Msororaji

3. Solaris

Boot from cdrom

Discussion started by: shabu

4. AIX

won't mount /usr...won't boot fully

Discussion started by: bbird