socket on serial port Post: 4766

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Serial port communication

We're running SCO Unix Openserver 5.05 and I'm having trouble with serial communication between the com2 serial port and a handheld device. Downloading data from Unix to the handheld works perfectly, but the other way around creates a major problem. I don't know whether it's a buffer overflow or...

2. Programming

can i implement serial commnucation using socket mechnism

Helo, i have one serial device which consists of 30 com ports. after installing driver of this device,it will detects 30 com ports like /dev/ttys0,/dev/ttys1 ....../dev/ttys30. now 30 com ports are connected with telephny model(each modem has com port). now i want to establish commnucation b/w...

3. UNIX for Dummies Questions & Answers

Serial port redirector

I need make serial data from virtual serial ports available on a TCP/IP network. For communications with hardware COM ports to send and receive serial data over a local network or the Internet. Example: POSIX machine (/dev/ttyS0) <--- TCP/IP ---> Windows machine COM1 Please help! I try use...

4. Programming

How to tell if a string to serial port has been sent

I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows: SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK); write (SerialPort_Send, pCommandString, strlen (pCommandString)); ...

5. Windows & DOS: Issues & Discussions

Telnet to a serial port

Hello all. I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions: How can i configure the serial port on dos? How can i telnet form dos to the serial port? How can i set up a telnet server on the...

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. Web Development

Writing to a Serial Port

I am trying to write to a serial port and capture the reponse in a file - adduser ethan dialout The user `ethan' is already a member of `dialout' root@meow:/home/ethan# ls -l /dev/ttyS0 crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0 $fh1 = fopen("/dev/ttyS0", "w+");...

9. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT OSF1

iscc

iscc(7) 						 Miscellaneous Information Manual						   iscc(7)

NAME

       iscc - serial communications interface

SYNOPSIS

       controller  iscc0  at  isa0

DESCRIPTION

       An  onboard  Zilog  8530  DUART	provides  AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
       ports.  Both serial communications ports can operate at baud rates from B50 to B38400,  excluding B134 (see tty(7)).

       On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01)	is
       available for use by application programs as an additional communications port.

       In  the	absence  of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
       system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.

       Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.

RESTRICTIONS

       Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured	as
       the serial system console. The iscc terminal driver enforces this restriction.

       No modem control is supported for either the CON or AUX serial communications ports.

FILES

       console terminal local terminal local terminal

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	   iscc(7)