Sponsored Content
Full Discussion: compaq smart array 532
Operating Systems SCO compaq smart array 532 Post 47572 by farmacy on Thursday 12th of February 2004 02:19:58 PM
Old 02-12-2004
compaq smart array 532

Trying to install Sco openserver on HP Proliant with this scsi controller but no scsi devices detected.

Boot controller is set as the smart array 532 but SCSI diags do not detect any SCSI boot devices during boot sequence

Any help appreciated

Last edited by farmacy; 02-13-2004 at 04:24 AM..
 

9 More Discussions You Might Find Interesting

1. Programming

HPUX and Compaq problem-urgent

Hi All Following is the lines of code which simply makes a structure of 1 bit member and 7 bit is unused.Then the structure is initialised with char pointer.The output on HPUX(BIG Endian) and Compaq(Little Endian) are different.On HPUX it gives zero and Compaq it gives 1. I never thought that the... (7 Replies)
Discussion started by: Shobhit
7 Replies

2. Filesystems, Disks and Memory

Compaq Scsi

Howto make Debian GNU/Linux install boot on a Compaq DeskPro XL 590 with Compaq SCSI diskdrive? The problem is that Compaq's Scsi controller sems to be odd. help please :) (0 Replies)
Discussion started by: Esaia
0 Replies

3. UNIX for Advanced & Expert Users

Smart Array on a RP4440

I have a new Rp4440 that has hp-ux 11.11 on it with a smart array 30 attached to it, HP says they are compatiable and i should be able to use it. I am looking for any help in setting up the array i have it all connected but dont know how to setup the array so the OS see's hard drives. I got no... (1 Reply)
Discussion started by: marvin51796
1 Replies

4. UNIX for Dummies Questions & Answers

Help In Compaq Tru64 UNix

Hi, I am new to UNIX. I need help in working with Compaq-UX TRU64 OS. How It work FTP Server? ANd MAil Server? and I have apach pprogram project and it work as HTTP Server. Also I need how can setup a new version of progrm on UNix like mozilla and adobe reader etc........... Thank... (3 Replies)
Discussion started by: svuad
3 Replies

5. SCO

SCO 5.0.5 on compaq presariolaptop C773tu

i want to install sco unix 5.0.5 on compaq presario laptop c773tu dual boot with windos xp. the HDD is 160 GB RAM 2046 MB ddr2. I have created partitions and loaded Win XP While installing SCO Unix 5.0.5 i get the following problem 1)memory excessively fragmented. I get around it by sepcifying... (0 Replies)
Discussion started by: vikramviky
0 Replies

6. UNIX for Advanced & Expert Users

Create RAID - Smart Array Tool - ML370

Hi guys, i must install an old old old ml370 server... I must create a RAID 5 with my 4 SCSI disk. I need a SmartStart disk for create it or a Floppy Disk called "Array configuration Tool". I don't find it on the hp website...:mad::mad::mad: Anyone have it?? Thanks in advance. Zio (0 Replies)
Discussion started by: Zio Bill
0 Replies

7. Linux

OS for Compaq Presario 1685

Hi, Trying to install a small OS to run this old laptop. Compaq Presario 1685, circa '98 Processor: AMD K6-2 380 MHz Data Bus Speed: 66 MHz Ram Installed 32 MB moduled Hard Drive: 4.3 GB DVD-ROM Burned in a CD “PUPPY-4.3beta1-k2.6.25.16-v423-SCSI”, tried to boot with it several times BUT... (7 Replies)
Discussion started by: nichos
7 Replies

8. UNIX for Dummies Questions & Answers

Explain the difference between the commands cd ~smart and cd ~/smart

Is it possible for both commands to work? (1 Reply)
Discussion started by: phunkypants
1 Replies

9. Red Hat

Install RHEL 7 on unsupported HP Smart Array (P400)

Hello community, after hours (days) spent to understand what's the problem reported also in the following thread: https://www.unix.com/red-hat/278892-cant-boot-rhel7-2-due-start-job-running.html I realize that the problem is the server itself. I opened a new thread since the issue in not related... (2 Replies)
Discussion started by: Lord Spectre
2 Replies
AIC(4)							 BSD/i386 Kernel Interfaces Manual						    AIC(4)

NAME
aic -- Adaptec AIC-6260 and AIC-6360 SCSI driver SYNOPSIS
device aic In /boot/device.hints: hint.aic.0.at="isa" DESCRIPTION
The aic driver provides support for the Adaptec AIC-6260 and AIC-6360 SCSI controller chips. Many systems that use these controller chips do not have a boot ROM and therefore cannot be booted from. HARDWARE
The adapters supported by the aic driver include: o Adaptec AHA-1505 (ISA) o Adaptec AHA-1510A, AHA-1510B (ISA) o Adaptec AHA-1520A, AHA-1520B (ISA) o Adaptec AHA-1522A, AHA-1522B (ISA) o Adaptec AHA-1535 (ISA) o Creative Labs SoundBlaster SCSI host adapter (ISA) o Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card) o Adaptec AHA-1030B, AHA-1030P (PC98) o NEC PC-9801-100 (PC98) SEE ALSO
aha(4), ahb(4), ahc(4), cd(4), ch(4), da(4), intro(4), sa(4) BUGS
The driver does not work well with multiple devices on the SCSI bus. The driver works well with devices like CDROMs and Tape drives. The driver works not so well with disk drives. The PC Card version appears to work better than the ISA version, but that may be due to differing levels of testing of the devices. BSD
November 8, 2003 BSD
All times are GMT -4. The time now is 08:36 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy