Sponsored Content
Full Discussion: read removable disk
Operating Systems Linux read removable disk Post 46850 by TioTony on Wednesday 28th of January 2004 12:07:31 AM
Old 01-28-2004
I think we need some more info to help you.

What OS are you using and what device are you using to connect the sandisk?

If you are connecting it with a USB connection to a Linux box (which I am guessing is probably the situation) for example, you should see it list as one of the scsi devices. You may have to reboot in order for the system to see it. If you run 'dmesg' and look through the output, you should see it listed somewhere. It will be something like /dev/sda.

You can then mount this by creating a directory, for example /sandisk and running 'mount /dev/sda /sandisk'.

This still does not mean you will be able to read the disk, it depends on how it was formatted.

Again, more info would probably help the forum suggest solutions.
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

I need read data from Disk,please help

Hallo, can You help me with this problem: I have Hard Disk with "SCO Server Release 5.0" and I need read the data from the disk. Know You how can I do it? I only know that the file system is ISC UNIX . I test FreeBSD, but I can not mount the disk (with error message "incorrect super block").... (7 Replies)
Discussion started by: Fik
7 Replies

2. SCO

Read a SCO floppy disk under another OS...

I have formatted a floppy disk under SCO unix. Is there a way I could read this disk under another operating system e.g. Windows or Linux? (1 Reply)
Discussion started by: sgertsos
1 Replies

3. Solaris

Removable External SCSI Harddrive

Hi guys, I have a solaris 9 operating system on a sun solaris machine and one external removable scsi drive connected to it. When i type the following command this is what is displayed: #format AVAILABLE DISK SELECTIONS: 0. c0t0d0 <DEFAULT cyl 17832 alt 2 hd 255 sec 63>... (6 Replies)
Discussion started by: tlee
6 Replies

4. Solaris

removable flash drive

I have a removable usb flash drive which is visible below as no. 2 # rmformat Looking for devices... 1. Volmgt Node: /vol/dev/aliases/cdrom0 Logical Node: /dev/rdsk/c0t0d0s2 Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0 Connected Device: HL-DT-ST DVD+-RW... (4 Replies)
Discussion started by: seyiisq
4 Replies

5. Solaris

removable usb flash drive

# rmformat Looking for devices... 1. Logical Node: /dev/rdsk/c0t0d0p0 Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0 Connected Device: HL-DT-ST DVD+-RW GWA4164B E113 Device Type: DVD Reader/Writer 2. Logical Node: /dev/rdsk/c2t0d0p0 Physical Node:... (26 Replies)
Discussion started by: seyiisq
26 Replies

6. Filesystems, Disks and Memory

Disk read and write speed.

Being a novice user to linux i m little unaware of how would i check disk read write speed. One of my mate is suggesting to create a file using dd command and check how much time it takes to create a 30 gb file . I think this has a little sense however i would also like to take your reviews... (5 Replies)
Discussion started by: pinga123
5 Replies

7. UNIX for Dummies Questions & Answers

How to read a disk label?

Hi there, I'm wondering how to display a disk label (why not edit it but I don't need that yet). I found several commands on forums like disklabel and diskinfo but I can't find them on my system and don't know the package they belong to. Can you help me? Cheers Santiago (2 Replies)
Discussion started by: chebarbudo
2 Replies

8. Solaris

Solaris 8 - Removable hard disk

Hi Gurus, I have difficulty in configuring removable hard disk in Solaris 8. I have connected hard disk to machine but I do not know how to configure it. Kindly tell me, how should I configure it .. so that I can create a mount point on this and write files to them. Regards Srini (7 Replies)
Discussion started by: sri243
7 Replies

9. Solaris

Read/Write Data on CD/RW Disk

Would simply like to write data (no audio) to a CD/RW disk. The disk drive states CD/RW on the front but don't know for sure if the software is configured to recognize it as a writable disk. I can read/move data from the disk to the hard drive with no issue from the disk. Any help in this... (4 Replies)
Discussion started by: jes1trish
4 Replies

10. Solaris

Short Disk Read

Good Afternoon, I am setting up a SunBlade 2000 with Solaris 9. I have a hard drive of unknown condition installed in the bottom slot. The machine powers up to the {ok} I'm trying to boot cdrom -sthe CDROM "Solaris 9 Operating Environment" so I can format the hard drive. I get: Error:... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 09:18 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy