01-13-2004
ok, so i had the guy in my team who is onsite at the data center pop in a new tape
Per your request I tried popping in other tape.
Here is what I got:
When I tried putting in other tape I got "clean drive" msg.
So I cleaned drive.
Put back in orig tape thinking that's all it was.
Tried to do simple copy and got "Cannot write to Device:"
So went back up and tried other tape .. got "clean drive" msg again
Cleaned drive again.
Put in other tape.
Tried doing simple copy and got same msg .. ie Cannot write .. etc
Ran cmd below and figured drive ok .. but not sure ..
You guys have any ideas/suggestions?
thx
# tctl -f /dev/rmt0 status
rmt0 Available 40-60-00-0,0 SCSI 8mm Tape Drive
attribute value description user_settable
mode yes Use DEVICE BUFFERS during writes True
block_size 1024 BLOCK size (0=variable length) True
extfm no Use EXTENDED file marks True
ret no RETENSION on tape change or reset True
density_set_1 39 DENSITY setting #1 True
density_set_2 39 DENSITY setting #2 True
compress yes Use data COMPRESSION True
size_in_mb 20000 Size in Megabytes False
ret_error no RETURN error on tape change or reset True
#
Our only other theory is maybe the density of the tape is incorect? any other ideas?
8 More Discussions You Might Find Interesting
1. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
2. AIX
I've just landed in a situation where an old IBM RS/6000 7025 F40 running AIX 4.2.1 has had it's tape drive fail. The tape drive in question is an HP C1533A 4mm 4GB/8GB DAT drive. It repeatedly gets write failures, and my trusty techique of whacking the cleaning tape in hasn't worked. Unfortunately... (2 Replies)
Discussion started by: phaedrus
2 Replies
3. AIX
Hi,
Help required!
How to mount internal tape drive of sun machine in AIX 5.3 (0 Replies)
Discussion started by: ashwin.krishna
0 Replies
4. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
5. AIX
I am trying to use this command to eject the tape
mt -f /dev/rmt/0 unload
but it gives me error
mt -f /dev/rmt/0 unload
mt: 0511-575 unload is not a recognized subcommand.
Usage: mt Subcommand
Valid subcommands are:
weof
eof
fsf
bsf
... (5 Replies)
Discussion started by: filosophizer
5 Replies
6. AIX
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and... (2 Replies)
Discussion started by: AixNoob87
2 Replies
7. AIX
Hi
I need to make some restore tapes for our old AIX systems
I have purchased some DDS2 tapes and cleaning tapes
The tape drive is rmt0
what commands can I enter to run the cleaning tape through the drive
and are the any commands I can enter to test these drives
prior to using... (2 Replies)
Discussion started by: madmacher
2 Replies
8. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
MT(1) General Commands Manual MT(1)
NAME
mt - magnetic tape control
SYNOPSIS
mt [-f device] [count]
DESCRIPTION
Mt is a user interface to the magnetic tape commands described in mtio(4). It allows one to space a tape forwards or backwards, write end
of file markers, etc.
With the -f option a tape device can be named, otherwise the environment variable TAPE is used if set, otherwise the default device
/dev/nrst4 is assumed. Standard input is used if the tape name is a dash (-). The count argument is used to tell how many blocks or files
to space or how many file markers to write. It may be a C-style decimal, octal or hexadecimal constant, by default "1".
Command is the action to perform, it may be one of the following, or any unambiguous prefix (like st for status):
eof, weof Write count end-of-file markers.
fsf Forward space count file markers.
fsr Forward space count records. (The size of a record depends on the tape, and may even be variable, depending on the size of
the writes.)
bsf Backwards space count files. The count may be zero to backspace to the start of the current file. (A tape device need not
support backwards movement, or may be very slow doing it. Rewinding and forward spacing may be better.)
bsr Backwards space count records. The tape is positioned after the last block of the previous file if you hit a filemark when
spacing backwards. The block count is set to -1 to indicate that the driver has no idea where it is on the previous file.
eom Forward space to the end of media.
rewind Rewind the tape.
offline, rewoffl
Rewind and take offline. This may cause some drives to eject the tape.
status Shows the status of the drive, the sense key of the last SCSI error, current file number, current record number, residual
count if the last command that encountered end-of-file, and the current block size.
retension Removes tape tension by winding and rewinding the tape completely.
erase Erases the tape completely and rewinds it.
density Sets the density code to read or write the tape to count. Density codes supported depend on the drive. This command need
not be used if the drive senses the proper density on read and can only write one density.
blksize, blocksize
Sets the block size used to read or write the tape to count. This command may be used to select a fixed block size for a
variable block size tape. This will speed up I/O for small block sizes. Use a zero count to use variable sized blocks
again.
ENVIRONMENT
TAPE Tape drive to use if set.
FILES
/dev/nrst4 Default tape device.
SEE ALSO
mtio(4), st(4).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
MT(1)