Also, you should link the script as S99myscript, i.e. only TWO digits. Apart from that, I'm a Linux admin so I don't know the specifics of HP-UX, but under Linux:
place original file in /etc/rc.d, then create the link thusly
Hi guys,
May I know how to install Solaris 8 in the way that I can triple boot it with my the other two OS: WIndows ME and Windows 2000 Pro.
Can you all please kindly advise me on how to setup the triple boot process inorder to allow Windows ME to be the default OS when being ask to choose... (1 Reply)
Hi all
The following error was displayed when a sco server (5.0.5) was booted. What should be done to overcome the problem. Replies appreciated.
Bios 03.0
0130688 KB memory good
01 processor(s) in system
remote console dialing on, please wait
connect fail : modem off
cpu clock... (6 Replies)
Hi i installed ssh of version v 1.21 and my AIX is of 5.3.
I want to start my ssh deamon at the startup
can any one please help me out reg..
Thanks in advance.. (1 Reply)
Issue: AIX server freezes on bootup.
Server AIX ver 4.3.3.0
When the AIX server reboots it negotiates NIS. During startup of NFS, customer gets one or more of the following error messages:
0513-056 Timeout waiting for command response. If you specified a foreign host, see the /etc/inittab file... (1 Reply)
Is it possible to give multiple runlevel options during boot up.. When the Welcome screen appears, i want to give multiple runlevel options.. So the user can boot into any desired runlevel he wants.. Found this kinda interesting.. Any hints and solutions please? (2 Replies)
Hi,
I've got a recent problem with 2 file systems on an AIX 5.3 server. The fs's are marked to auto mount at startup and do show as being mounted after a a restart however if you cd to the mount point and 'df -g .' it shows the fs hasn't actually mounted.
$ mount |grep SQLT0001.0
... (2 Replies)
Hello all,
I have a script callled 'ABCstartup' setup under /etc/rc.d/init.d
Softlink 'S91ABCstartup' pointing to above script has been created under /etc/rc.d/rc3.d
The script is not being executed when the server restarts.
The script runs successfully via manual execution:... (5 Replies)
I have a known good external SCSI HD running SCO UNIX OpenServer 5.0.7. I decided that I wanted to be able to run this drive on another computer, so I bought the same SCSI card as before (LSI) and then attempted to boot on the other system. The bootup process hung with the error F painit. I've... (13 Replies)
Discussion started by: Transpower
13 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)