01-01-2004
You're posting here and you need a computer to do that. Maybe you can disconnect the c drive from the screwed-up system and install it as a d or e drive in your good system.
Or if you can burn a cd, you can boot from that.
Or you can install a new drive in your screwed-up system and put an os on that and repair the bad drive.
Or you can contact QueTek and let them walk you through an evaluation.
Or you can take the screwed up system to a data recovery company. I'll bet you can find someone to recover the drive for less than $1000. The prices for data recovery have dropped over the past few years for cases where no hardware damage is present.
Buying a floppy may be an option too, but you will use that floppy maybe once a year. Floppies are getting mighty close to punched cards and paper tape. Old formats may never die, but they do fade to insignificance. If you don't have a cd burner, you might want to buy that instead. You will use a cd burner much more than once a year. And I'm not sure if you can fit a data recovery tool on a bootable floppy. But sure that you have a viable plan for that floppy drive.
Hmmm...the last time I backed up the C drive on this laptop I'm using was 12/08/03. Guess I better do another one this weekend. I'd hate to lose a couple of bookmarks or something.
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have suns machine that holds two hard drives. I only used one. I tryed to make a lan network with my windows xp. When I tryed to restart the machine it wanted to a password. when before I just typed root to log in. So i edited the etc dir. big mistake. So now the machine will not read the hard... (2 Replies)
Discussion started by: victbla
2 Replies
2. SCO
I trying to learn Unix and I am using SCO Unixware 7.1. Below are three question that I have:
1) Can someone tell me what command I can use to find out the system processor speed.
2) Can someone tell me what command I can use to find out what's the hard drive size of my unix box.
3) Can... (1 Reply)
Discussion started by: etaup02
1 Replies
3. UNIX for Dummies Questions & Answers
Hi,
Can someone answer to my question.I' totally new to Unix.
What is the command for removing the hard drive from the system?
Thanks a lot,
Puja (2 Replies)
Discussion started by: pujathakral
2 Replies
4. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. AIX
Good day,
I have an rs/6000 server, model 7044-270. I bought a 2nd hard drive for it but im not sure its the right one. (fru:H13060) As you surely know, the 7044-270 hard drives are put in some sort of tray/carrier. There is a cable that will interface the HDD with the tray/carrier so the... (0 Replies)
Discussion started by: Netghost
0 Replies
7. Ubuntu
Hi, I just downloaded and installed Ubuntu yesterday. It's the first time I have used it, so bear with me. I think I figured out how to get my sound drivers to work (X-Fi)... I had downloaded some OSS drivers, bout to go test them.
But what I really want to know is... I have 2 hard drive,... (2 Replies)
Discussion started by: blind melon
2 Replies
8. SCO
Hello guys,
I have got from a friend a hard disk which was used in the SCO OpenServer. He needs some data from it. I have no clue how to copy its content with Linux or Windows-I have tried few Linux distros but the result is always the same-the file system is not recognized so can't be mounted.... (4 Replies)
Discussion started by: kataro
4 Replies
9. UNIX for Advanced & Expert Users
I have connected an external hard drive. I can't find it.
Both ls /media, fdisk -l and ls /dev show nothing.
TIA (3 Replies)
Discussion started by: Meow613
3 Replies
SD(4) Linux Programmer's Manual SD(4)
NAME
sd - driver for SCSI disk drives
SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */
#include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */
CONFIGURATION
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti-
tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive.
SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num-
ber is the number of the physical drive in order of detection, and partition_number is as follows:
+3 partition 0 is the whole drive
partitions 1-4 are the DOS "primary" partitions
partitions 5-8 are the DOS "extended" (or "logical") partitions
For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have
major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system.
At this time, only block devices are provided. Raw devices have not yet been implemented.
DESCRIPTION
The following ioctls are provided:
HDIO_GETGEO
Returns the BIOS disk parameters in the following structure:
struct hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
unsigned long start;
};
A pointer to this structure is passed as the ioctl(2) parameter.
The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical
geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of
fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters.
BLKGETSIZE
Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long.
BLKRRPART
Forces a reread of the SCSI disk partition tables. No parameter is needed.
The SCSI ioctl(2) operations are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl(2) fails with
the error EINVAL.
FILES
/dev/sd[a-h]
the whole device
/dev/sd[a-h][0-8]
individual block partitions
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the
latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 SD(4)