11-22-2003
My understanding is the '64' in your case defines the total number of logical partitions across all drives, not per drive. Note this is different then physical paritions (PP) which refers to disks. In your example you would have 2 PPs (hdisk1 and hdisk2) and 64 total LPs. I do not know if this means you will have 32 LPs per disk or how the OS splits it up. After you run your mklv, if you do an lslv you should see the PP and LP values of 64 and 2 respectively I believe.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
My company had purchased a Pro Model hard disk duplicator a couple of years ago and has used it successfully until our disk drive vendor stopped production of the currently used drives and offered us what they considder to be a direct replacement drive.
On these new drives everything matches the... (3 Replies)
Discussion started by: crazykelso
3 Replies
2. Solaris
I am running Solaris 10 and i need to mirror a 73 gig HD. How do you mirror one in Solaris? (2 Replies)
Discussion started by: dewsdwarfs
2 Replies
3. SCO
How Can I Do Mirroring In Unix? (0 Replies)
Discussion started by: DIMITRIOSDOUMOS
0 Replies
4. UNIX for Advanced & Expert Users
How make mirror hardisk safe and not have trouble when we chance new hardisk in system live in sun solaris 8 server. (3 Replies)
Discussion started by: athurbayunata
3 Replies
5. Shell Programming and Scripting
I'm not sure how to best explain what I'd like to do, so let me give an example. I used to work in a department that deals with internet security. This department had an "internal" website (only people in the building can get on it) and an "external" website (anyone in the world can get on it --... (1 Reply)
Discussion started by: sstevens
1 Replies
6. Solaris
hi all,
i want to mirror two disks with disksuite under solaris 9 , doses smeone can explain me Briefly the essential steps to do that plz ? (3 Replies)
Discussion started by: lid-j-one
3 Replies
7. Solaris
Hi All
i wish to mirror the root disk, but i face the below error.
root@saturn # metainit d11 1 1 c0t0d0s0
metainit: saturn: c0t0d0s0: is mounted on /
kindly assist... (27 Replies)
Discussion started by: SmartAntz
27 Replies
8. Solaris
Hi All
Please can I have some help/advice.
I am fairly new to unix so any help will be useful.
I need to perform HDD Mirroring on a Sun Fire V245 Server running Solaris 10 OS.
The system is already up and running and has the partitions and slices already.
Is it possible to perform the... (6 Replies)
Discussion started by: pluto.flame
6 Replies
9. Homework & Coursework Questions
1.) I am to write scripts that will be phasetest folder in the home directory.
2.) The folder should have a set-up,phase and display files
I have written a small script which i used to check for the existing users and their password.
What I need help with:
I have a set of questions in a... (19 Replies)
Discussion started by: moraks007
19 Replies
10. AIX
hi.... Friends...
Why using mirroring ?
what is the use of mirroring? just any one tell about clearly....
thanks.... (4 Replies)
Discussion started by: Kannan841
4 Replies
HD(4) Linux Programmer's Manual HD(4)
NAME
hd - MFM/IDE hard disk devices
DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major
device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave
hdd.
General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order
the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the
four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi-
cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions
on an IDE disk.
For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the
second one.
They are typically created by:
mknod -m 660 /dev/hda b 3 0
mknod -m 660 /dev/hda1 b 3 1
mknod -m 660 /dev/hda2 b 3 2
...
mknod -m 660 /dev/hda8 b 3 8
mknod -m 660 /dev/hdb b 3 64
mknod -m 660 /dev/hdb1 b 3 65
mknod -m 660 /dev/hdb2 b 3 66
...
mknod -m 660 /dev/hdb8 b 3 72
chown root:disk /dev/hd*
FILES
/dev/hd*
SEE ALSO
chown(1), mknod(1), sd(4), mount(8)
COLOPHON
This page is part of release 3.27 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 1992-12-17 HD(4)