Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Which SCSI Adapter?
Operating Systems Solaris Which SCSI Adapter? Post 43577 by Plain Person on Wednesday 19th of November 2003 09:35:34 AM
Old 11-19-2003
One more thing....
Am I correct in thinking that Adaptec cards are verboten in this machine? If they aren't, that may be the cheaper/easier route.

Thanks.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

adaptec scsi host adapter

Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've... (1 Reply)
Discussion started by: goatboy_tx
1 Replies

2. IP Networking

LAN Adapter

Im newest in unix, Please, give me solution for installing lan adapter if driver not found in the list of ethernet drivers ihave unix driver in a dos diskete please give me the other solution and tell me where the domain of unix class online, so ican read from it. Thank's very much (3 Replies)
Discussion started by: ade_muhdiat
3 Replies

3. Solaris

Trouble Installing a SCSI Adapter

Okay. I admit I'm sort of a newbie in this regard. I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing. ... (3 Replies)
Discussion started by: Plain Person
3 Replies

4. AIX

Spliting PCI-X Dual Channel Ultra320 SCSI Adapter

I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible? For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
Discussion started by: kwliew999
11 Replies

5. HP-UX

what is an adapter?

Hi , Hi what is an adapter?what is its use ? How to log into a tibco server from unix home directory. (1 Reply)
Discussion started by: megh
1 Replies

6. SCO

Installing LAN adapter

I inserted a PCI Realtek RTL8139 network adapter on a PC running SCO Openserver 5.0.6. I successfully loaded drivers and I'm trying to install the card with netconfig command, unfortunately without success. Here are the steps I follow to install the card: I run netconfig, from menu 'hardware'... (2 Replies)
Discussion started by: kampus
2 Replies

7. Hardware

SCSI Ultra320 80->68 adapter

I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin. There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC' Do we need to set any jumpers before turning it on? We already had... (0 Replies)
Discussion started by: orange47
0 Replies

8. SCO

Moving hard drive and SCSI adapter to another computer

OK group, it's been 12 years since I worked with SCO. I need some direction here: SCO Openserver 5.07 I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies

9. HP-UX

HPUX 11.11 Sept.2003 cannot see PCI-X scsi adapter

I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC. At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies

10. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is... (12 Replies)
Discussion started by: trevian3969
12 Replies

LEARN ABOUT POSIX

aic

AIC(4)							 BSD/i386 Kernel Interfaces Manual						    AIC(4)

NAME

     aic -- Adaptec AIC-6260 and AIC-6360 SCSI driver

SYNOPSIS

     device aic

     In /boot/device.hints:
     hint.aic.0.at="isa"

DESCRIPTION

     The aic driver provides support for the Adaptec AIC-6260 and AIC-6360 SCSI controller chips.  Many systems that use these controller chips do
     not have a boot ROM and therefore cannot be booted from.

HARDWARE

     The adapters supported by the aic driver include:

     o	 Adaptec AHA-1505 (ISA)
     o	 Adaptec AHA-1510A, AHA-1510B (ISA)
     o	 Adaptec AHA-1520A, AHA-1520B (ISA)
     o	 Adaptec AHA-1522A, AHA-1522B (ISA)
     o	 Adaptec AHA-1535 (ISA)
     o	 Creative Labs SoundBlaster SCSI host adapter (ISA)
     o	 Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card)
     o	 Adaptec AHA-1030B, AHA-1030P (PC98)
     o	 NEC PC-9801-100 (PC98)

SEE ALSO

     aha(4), ahb(4), ahc(4), cd(4), ch(4), da(4), intro(4), sa(4)

BUGS

     The driver does not work well with multiple devices on the SCSI bus.  The driver works well with devices like CDROMs and Tape drives.  The
     driver works not so well with disk drives.  The PC Card version appears to work better than the ISA version, but that may be due to differing
     levels of testing of the devices.

BSD
								 November 8, 2003							       BSD
All times are GMT -4. The time now is 11:44 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy