10-21-2003
.............
thanks to Perderabo ....
by the way, i had also set up an eri0 no changes, because -->....
just for info and forum searchs
the answere:
I contacted a friend of mine who's working at sun as an SE, he told me that the tpye "ce" is an additional driver for cards witch supports VLAN like vge, hme and ce itselfs. the "low budget" variants like eri or ge cannot create additional VLAN interfaces, so the only alternativ approach is to create "dummy" interfaces (eri0:1).. not an really good alternativ solution ;-(
thx a lot
greetings Preßy
10 More Discussions You Might Find Interesting
1. IP Networking
Hi all,
so server: FreeBSD 7.0 release,
interfaces on it DLINK DGE-528T with support of vlans :))
so first interface looks to LAN second to ISP.
I created vlan1 with id 1 and gave to it ip address and plug it in
tagged port of swith for vlan 1. so client from vlan1 reaches the server.
it... (2 Replies)
Discussion started by: samar
2 Replies
2. Solaris
I 've a T5220 running solaris 10u6 with Ldoms 1.1. following is o/p of my dladm
e1000g0 type: non-vlan mtu: 1500 device: e1000g0
e1000g1 type: non-vlan mtu: 1500 device: e1000g1
e1000g531001 type: vlan 531 mtu: 1500 device: e1000g1
e1000g2 ... (0 Replies)
Discussion started by: fugitive
0 Replies
3. AIX
I have a aix 5.3, two network adapter, configure as a etherchannel, how can I know the vlan id by command? (4 Replies)
Discussion started by: rainbow_bean
4 Replies
4. Programming
Hi all
My application is a monitoring application that monitors the incoming udp packet when ever required. When ever a particular source ip and port and dest ip and port is provided the filter will be framed based them. For eg,
char filterExpr;
filterExpr = "udp and src host 192.168.16.100... (0 Replies)
Discussion started by: anusha_pixel
0 Replies
5. IP Networking
Hello. I want to Communicate 2 VLAN with router like this solution:
http://8pic.ir/images/83m0ouih8mmm9s1sfl56.jpg
For this purpose I'm configuring 2 Linux system as a switch and connect 4 host to them. Then a router is added to scenario.
The configuration of the switches is:
On DUT1(Linux):... (1 Reply)
Discussion started by: zsn
1 Replies
6. Solaris
Hi,
Is it possible to VLAN tag with a ce interface on Solaris 9? Link speed is gb.
ce:0:ce0:link_speed 1000
I have a ce0 interface I would need to have access to another VLAN as well as the one it's currently on.
What commands would I need to run?
Thanks.;) (2 Replies)
Discussion started by: sparcman
2 Replies
7. Red Hat
We have two hosts in same vlan with same route rules.
One of them is not able to connect to an outside IP while in another I get "failed: Connection timed out" while testing the connectivity through netcat.
I have tried mtr /traceroute and it gives me the same results.
Is there a netcat... (1 Reply)
Discussion started by: jacki
1 Replies
8. Solaris
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Discussion started by: Shirishlnx
0 Replies
9. AIX
Hi Guys,
Our lpars is currently running on 2 different vlans (20, 30). Now we have a requirement that vlan 30 needs to be change to vlan 31 at the same subnet. I'm not sure on what is the best approach for this or what change is involve on the AIX side.
This is our setup.
Network switch -... (5 Replies)
Discussion started by: kaelu26
5 Replies
10. Solaris
Hi Folks,
I am currently moving systems to a new environment, with some changes to the network requirements on the systems.
One of these changes is moving from just standard IPMP to using IPMP on top of a VLAN, I have used VLAN tagging befor without issue - however not with IPMP.
What I... (2 Replies)
Discussion started by: gull04
2 Replies
LEARN ABOUT SUSE
ifcfg-vlan
IFCFG-VLAN(5) Network configuration IFCFG-VLAN(5)
NAME
ifcfg-vlan - virtual LAN interface configuration
SYNOPSIS
/etc/sysconfig/network/ifcfg-vlan*
Virtual LANs (802.1q)
To setup a vlan interface you need a configuration file that contains at least the mandatory
ETHERDEVICE
variable with the real interface used for the virtual LAN.
Further, it may contain the optional
VLAN_ID
variable that specifies the VLAN ID.
By default and when the VLAN_ID variable is not set, the number at the end of the interface name is the VLAN ID.
Preferably the interface name and the configuration file follow the VLAN interface name scheme (type), that is either:
ifcfg-vlan<VLAN-ID> (e.g. ifcfg-vlan42)
or
ifcfg-name.<VLAN-ID> (e.g. ifcfg-eth0.42)
The VLAN-ID can be also 0-padded (e.g. ifcfg-vlan0042 or ifcfg-eth0.0042).
Also in case of custom names, trailing digits are interpreted as VLAN-ID by default (e.g. ifcfg-dmz42). When VLAN_ID is set in the config,
the interface name have any name (e.g. ifcfg-foobar).
Note: The drawback of custom interface names and VLAN_ID usage is, that a rename of the interface is required and that they violate the
name scheme.
The real interface will be set UP automatically and doesn't need a config file in case of a physical interface. But without a config file
YaST will consider this interface as unused, if will not follow hotplug events and you're unable to apply any settings, e.g. ETH-
TOOL_OPTIONS. To avoid that, provide an config file with at least STARTMODE='auto'.
The rest of the VLAN interface IP and routes configuration do not differ from ordinary interfaces. See also man ifcfg and man routes for
details.
EXAMPLES
Sets up vlan3 vlan interface on top of eth0:
ifcfg-vlan3
STARTMODE='auto'
ETHERDEVICE='eth0'
IPADDR='192.168.3.27/24'
Sets up eth0.3 vlan interface on top of eth0:
ifcfg-eth0.3
STARTMODE='auto'
ETHERDEVICE='eth0'
IPADDR='192.168.3.27/24'
Sets up lan1 vlan interface with ID 42 on top of eth0:
ifcfg-lan1
STARTMODE='auto'
ETHERDEVICE='eth0'
VLAN_ID='42'
IPADDR='192.168.3.27/24'
BUGS
Please report bugs at <http://www.suse.de/feedback>
AUTHOR
Christian Zoz <zoz@suse.de>
Michal Svec <msvec@suse.cz>
Bjoern Jacke
Mads Martin Joergensen <mmj@suse.de>
Michal Ludvig <mludvig@suse.cz>
Marius Tomaschewski <mt@suse.de>
SEE ALSO
routes(5), ifcfg(5), ifup(8).
sysconfig August 2004 IFCFG-VLAN(5)