10-04-2003
Dell Dual Xeon PowerEdge 4600
Notes:
System Configuration: [i686] Dell Computer Corporation PowerEdge 4600 (4 X Intel(R) XEON(TM) CPU 2.00GHz
1988.782 MHz) hyperthreaded
System clock frequency: 99.0827 MHz
Memory size (approximate): 2559 Megabytes
========================= CPUs ========================
CPU # CPU MHz CACHE (KB) Bogomips
------- --------- ------------ ----------
0 1988.782 512 KB 3944.04
3970.35
1 1988.782 512 KB
2 1988.782 512 KB
3 1988.782 512 KB 3970.35
3970.35
PCI RAID Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di (rev 01)
PCI SCSI Adaptec RAID
RAID5 across 5 disks.
Results:
BYTE UNIX Benchmarks (Version 3.11)
System -- Linux box .
unknown
Start Benchmark Run: Wed Sep 10 16:13:25 EDT 2003
13 interactive users.
Dhrystone 2 without register variables 2804051.1 lps (10 secs, 6 samples)
Dhrystone 2 using register variables 2779392.5 lps (10 secs, 6 samples)
Arithmetic Test (type = arithoh) 10609125.6 lps (10 secs, 6 samples)
Arithmetic Test (type = register) 495673.6 lps (10 secs, 6 samples)
Arithmetic Test (type = short) 329765.3 lps (10 secs, 6 samples)
Arithmetic Test (type = int) 493445.2 lps (10 secs, 6 samples)
Arithmetic Test (type = long) 495279.2 lps (10 secs, 6 samples)
Arithmetic Test (type = float) 447996.4 lps (10 secs, 6 samples)
Arithmetic Test (type = double) 448015.6 lps (10 secs, 6 samples)
System Call Overhead Test 198333.6 lps (10 secs, 6 samples)
Pipe Throughput Test 282941.1 lps (10 secs, 6 samples)
Pipe-based Context Switching Test 104133.0 lps (10 secs, 6 samples)
Process Creation Test 3907.1 lps (10 secs, 6 samples)
Execl Throughput Test 1299.8 lps (9 secs, 6 samples)
File Read (10 seconds) 856057.0 KBps (10 secs, 6 samples)
File Write (10 seconds) 184249.0 KBps (10 secs, 6 samples)
File Copy (10 seconds) 37179.0 KBps (10 secs, 6 samples)
File Read (30 seconds) 925.0 KBps (30 secs, 2 samples)
File Write (30 seconds) 427.0 KBps (30 secs, 2 samples)
File Copy (30 seconds) 1.0 KBps (30 secs, 2 samples)
C Compiler Test 839.7 lpm (60 secs, 3 samples)
Shell scripts (1 concurrent) 1809.0 lpm (60 secs, 3 samples)
Shell scripts (2 concurrent) 1354.3 lpm (60 secs, 3 samples)
Shell scripts (4 concurrent) 930.0 lpm (60 secs, 3 samples)
Shell scripts (8 concurrent) 497.0 lpm (60 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places 55201.8 lpm (60 secs, 6 samples)
Recursion Test--Tower of Hanoi 48568.8 lps (10 secs, 6 samples)
INDEX VALUES
TEST BASELINE RESULT INDEX
Arithmetic Test (type = double) 2541.7 448015.6 176.3
Dhrystone 2 without register variables 22366.3 2804051.1 125.4
Execl Throughput Test 16.5 1299.8 78.8
File Copy (30 seconds) 179.0 1.0 0.0
Pipe-based Context Switching Test 1318.5 104133.0 79.0
Shell scripts (8 concurrent) 4.0 497.0 124.2
=========
SUM of 6 items 583.6
AVERAGE 97.3
8 More Discussions You Might Find Interesting
1. Linux Benchmarks
CPU/Speed: Dual PIII 533
Ram: 256Mb PC133
Motherboard: Unknown, Intel Chipset
Cache: 256k on board
Controller: PARC Raid 2/Si, AIC-7880U
Disk: 30Gb RAID 5
Load: 1 user. Clean boot, init 5 but X-Windows not loaded.
Kernel: See Benchmarks.
pgms: gcc 3.2.3
... (2 Replies)
Discussion started by: Garp
2 Replies
2. Solaris
hi, i am trying to install solaris 10 (on 4 cd's downloaded from the sun website) on my dell poweredge 2800 server. 2 xeon processors, 2GB of RAM and 2 NICS, 73 GB SCSI (maxtor ultra320, 3.5 series), i can give more details on request...
the installation crashes when trying to detect the NICS... (0 Replies)
Discussion started by: xinugeek
0 Replies
3. Filesystems, Disks and Memory
Does anybody no how to get around the fact that the Red Hat installation does not see the SCSI hard drives. It lets you manually pick the proper device, but still fails saying no drive detected (or something to that effect). I was going to install windows 2003 Server and use VMware...but again,... (1 Reply)
Discussion started by: Fatflea
1 Replies
4. UNIX for Dummies Questions & Answers
I have 2 Dell Poweredge 1950 servers running . I have been having intermittent performance issues with the NIC cards on one of them. The two servers are identical and are running the same operating system. The server that has the issue is on the DMZ on a a static IP and is hosting a website. ... (0 Replies)
Discussion started by: skotapal
0 Replies
5. SCO
Hello all,
I'am experiencing weird relyability problems with a SCO 6.0 Openserver server that runs on a Dell Poweredge 1800 equipped with a PERC DC4 raid controller and 4 36 GB 15 K rpm hot swappable scsi harddisks.
It runs a RAID 10 configuration.
It uses the mega hba, Revision 8.03a Release... (1 Reply)
Discussion started by: frederik1
1 Replies
6. Programming
Hi,
I have a C++ program to access /dev/mem and retrieve details like Vendor, Manufacturer details of the motherboard. This works fine on all the machines except for on Dell Poweredge 2850,1950... machines.
I receive a 'EFAULT' when I try to access /dev/mem on these servers.
I suspect some... (1 Reply)
Discussion started by: ragisreekanth
1 Replies
7. Linux Benchmarks
CPU: dual Xeon 3.2 GHz
Ram: 1Gig
Motherboard:
Bus: 800MHz
Cache: 1MB
Controller:Smart Array 641
Disk: UltraSCSI 320
Load:
Kernel:2.6.9-1.667smp
Kernel ELF?: yes
pgms: compiled with gcc 3.4.3
BYTE UNIX Benchmarks (Version 3.11)
System -- Linux ford 2.6.9-1.667smp #1 SMP... (0 Replies)
Discussion started by: migurus
0 Replies
8. SCO
I was asked to get a Dell PowerEdge 2600 server, out of warranty, running SCO 3.2v5.06 to perform a full backup. I spent hours researching and preparing a strategy only to fail on-site.
The only device names in /dev for a tape drive were
/dev/xStp0
/dev/xcdt0
/dev/xct0
... (6 Replies)
Discussion started by: ezlarry
6 Replies
LEARN ABOUT DEBIAN
dvbscan
dvbscan(1) General Commands Manual dvbscan(1)
NAME
dvbscan - a program to produce DVB-T channels.conf files.
SYNOPSIS
dvbscan [options]<initialscanfile>
DESCRIPTION
This manual page documents briefly the dvbscan commands.
dvbscan is a program to produce DVB-T channels.conf files.
OPTIONS
-h print this help text
-adapter <id>
adapter to use (default 0)
-frontend <id>
frontend to use (default 0)
-demux <id>
demux to use (default 0)
-secfile <filename>
Optional sec.conf file
-secid <secid>
ID of the SEC configuration to use, one of: * UNIVERSAL (default) - Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz, Dual
LO, loband 9750, hiband 10600 MHz * DBS - Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz * STANDARD -
10945 to 11450 Mhz, Single LO, 10000 Mhz * ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz * C-BAND - Big Dish,
3700 to 4200 MHz, Single LO, 5150 Mhz * C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz
* One of the sec definitions from the secfile if supplied
-satpos <position>
Specify DISEQC switch position for DVB-S
-inversion <on|off|auto>
Specify inversion (default: auto)
-uk-ordering
Use UK DVB-T channel ordering if present.
-timeout <secs>
Specify filter timeout to use (standard specced values will be used by default)
-filter <filter>
Specify service filter, a comma seperated list of the following tokens: If no filter is supplied, all services will be output *
tv - Output TV channels * radio - Output radio channels * other - Output other channels * encrypted - Output
encrypted channels
-out raw <filename>|-
Output in raw format to <filename> or stdout -out channels <filename>|- Output in channels.conf format to <filename> or stdout -out
vdr12 <filename>|- Output in vdr 1.2.x format to <filename> or stdout -out vdr13 <filename>|- Output in vdr 1.3.x format to <file-
name> or stdout
This manual page was written by Uwe Bugla <uwe.bugla@gmx.de>.
February 14, 2009 dvbscan(1)