Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Solaris (9) won't boot!
Operating Systems Solaris Solaris (9) won't boot! Post 40685 by finster on Sunday 21st of September 2003 10:41:16 AM
Old 09-21-2003
you could of hit stop - a upon boot to get to your ok prompt.


then as stated above use printenv to show settings.

Is the system in diagnostic mode?

check diag-switch? (it should respond with false...)

if not: setenv diag-switch? false

Your machine was trying to boot from the net and this is the default setting for diag-switch=true. By changing it to diag-switch=false, default would be the disk. (maybe not the correct disk e.g. (disk0, disk1, etc) then edit boot-device disk0 or whatever disk #.


e.g setenv boot-device disk? (where ? is a #, disk = disk0 = scsi id 3)

The following link (sun manuals for ultra 60) willl have most of your answers.

http://www.sun.com/products-n-soluti..._60/index.html

Hope this helps for future references....
 

10 More Discussions You Might Find Interesting

1. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim (1 Reply)
Discussion started by: rahim
1 Replies

2. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

3. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
Discussion started by: zosojohnny
0 Replies

4. UNIX for Dummies Questions & Answers

Linux won't boot

I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed. I tried diffrent Linux distributions, but nothing works. This are the partitions, maybe it's... (12 Replies)
Discussion started by: teis
12 Replies

5. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies

6. Solaris

Solaris 10u7 won't boot after hardware change

Hi all, I've somehow gained the idea that I _need_ to run at least 1 box with Solaris, but things don't go as I had planned :-) I pulled this ancient IBM eserver xseries 305 out of the dust, and got myself a fresh copy of the required cd's for Solaris 10u7. FAIL, for some reason the box and the... (7 Replies)
Discussion started by: mr.aart
7 Replies

7. UNIX for Dummies Questions & Answers

SUN Ultra 10 won't boot - Help Please

Folks; My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again. i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies

8. UNIX for Dummies Questions & Answers

New kernel won't boot

I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying: Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda5 does not exist. After making the modules and headers I made the... (4 Replies)
Discussion started by: mdop
4 Replies

9. Solaris

Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

This is the error message that I am getting on a Solaris 10 sparc server scsi: no major number cannot load drivers for /pci@400..... Can't load the root filesystem Type 'go' to resume {0} ok Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up... (5 Replies)
Discussion started by: trinityforce
5 Replies

10. Hardware

AT&T UNIX PC won't boot

Hello, I am new to the UNIX community, however I have a beginner's level understanding of a majority of the basic commands in UNIX. Today, my teacher gave me her old AT&T UNIX PC. I brought it home, turned it on, and got a completely green screen. I turned it off, and back on and it booted... (12 Replies)
Discussion started by: _dhoepp
12 Replies

LEARN ABOUT CENTOS

installboot

installboot(1M) 														   installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk	       The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
		       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

	      example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
		   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

	   directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

	   second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

								    11 Apr 2005 						   installboot(1M)
All times are GMT -4. The time now is 05:04 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy