07-03-2003
Try the metastat command (in /usr/sbin on Solaris 8) - will give the following type of output:
% metastat|more
d1: Mirror
Submirror 0: d10
State: Okay
Submirror 1: d11
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4097331 blocks
d10: Submirror of d1
State: Okay
Size: 4097331 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s0 0 No Okay
d11: Submirror of d1
State: Okay
Size: 4097331 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t1d0s0 0 No Okay
That plus your /etc/vfstab and df command should give you anything you are looking for.
4 More Discussions You Might Find Interesting
1. Solaris
Hi I have a system that gave me some messages on bootup that I was not used to seeing:
pseudo: pseudo-device: vol0
genunix: vol0 is /pseudo/vol@0
these came with these:
Feb 13 17:42:17 system1 eri: SUNW,eri0 : 100 Mbps full duplex link up
Feb 13 17:42:21 system1sendmail: My unqualified... (0 Replies)
Discussion started by: mndavies
0 Replies
2. UNIX for Advanced & Expert Users
Hi
I tried a tool called mediainfo
> brew info media-info
media-info 0.7.51
http://mediainfo.sourceforge.net
Depends on: pkg-config
/usr/local/Cellar/media-info/0.7.51 (3 files, 14M)
http://github.com/mxcl/homebrew/commits/master/Library/Formula/media-info.rb
Got details from a test... (3 Replies)
Discussion started by: slashdotweenie
3 Replies
3. Red Hat
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
Discussion started by: Tanmoy
0 Replies
4. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
cmdk(7D) Devices cmdk(7D)
NAME
cmdk - common disk driver
SYNOPSIS
cmdk@target, lun : [ partition | slice ]
DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
disks.
The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk.
I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
error.
Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the
entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device (IDE)
/dev/rdsk/cndn[s|p]n raw device (IDE)
where:
cn controller n
dn lun n (0-7)
sn UNIX system slice n (0-15)
pn fdisk partition(0)
/kernel/drv/cmdk 32-bit kernel module.
/kernel/drv/amd64/cmdk 64-bit kernel module.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)
SunOS 5.10 9 Oct 2004 cmdk(7D)